WELL.......NOW guess what THIS does....Warning 56K / photos...

[jumanji969]

I want one for my Christmas

Haha how happy would you be to find THAT under your tree

[macg]

too bad im in the philippines

[Revv23]

ok it looks like itll be a long time before we see these things, guess ill just vmod these boards the hard way...

*goes to hipro's IC7 guide*

hehehe

[Rabbi_NZ]

HiPro, cant believe I didnt see this thread before... this looks very professional, minute it comes out I'm sold!

Any ETA on first release yet?

Good work

[H2OGun]

Really nice. I am gonna get one as soon as it's available!!

[Revv23]

so how will this be powered? just a molex connector? or more?

[hipro5]

It's geting ready.........

It will be powered from two molexes - for best amperaz - .......If we have 2 x 256MB Ram sticks , we can feed it with only one molex......but if we have 2 x 512MB Ram sticks , we have to feed it with two molexes.......NOT for the DDR Maximizer (it will not harm or burn it) BUT for the molexes themshelves not to be melted........

Also the MAX - MAX Vdroop (flactuation) we will measure on a Mobo's Mos-Fet will be "0"......For example : IF we pick the 3.30Volts when we are in IDLE and then we run - let's say - memtest86 , we will measure on our digital 3,5digit multimeter , 3.30Volts.....On full load we will measure 3.30Volts.....That's the final revision V.1.2.....with 1.5mV~2.5mV(0.0015 ~0.0025Volts) flactuation

ALSO some Mobo's UPDATE..... H E R E .........

[situman]

damn i have some bh-5 sitting there waiting to be installed in my ic7. About how much longer before it comes out?

[enzoR]

It's geting ready.........

It will be powered from two molexes - for best amperaz - .......If we have 2 x 256MB Ram sticks , we can feed it with only one molex......but if we have 2 x 512MB Ram sticks , we have to feed it with two molexes.......NOT for the DDR Maximizer (it will not harm or burn it) BUT for the molexes themshelves not to be melted........

Also the MAX - MAX Vdroop (flactuation) we will measure on a Mobo's Mos-Fet will be "0"......For example : IF we pick the 3.30Volts when we are in IDLE and then we run - let's say - memtest86 , we will measure on our digital 3,5digit multimeter , 3.30Volts.....On full load we will measure 3.30Volts.....That's the final revision V.1.2.....with 1.5mV~2.5mV(0.0015 ~0.0025Volts) flactuation

ALSO some Mobo's UPDATE..... H E R E .........

you should be building power supples

[enzoR]

i don't think so
i want one aswell

hahah same here!

[Revv23]

oh man thats impressive...

i can easily vmod my stuff but keeping it at constant volts like that is another story...

i love you hipro..

edit - any word on an nforce2 mobo?

[death metal]

hipro, i try not to clog this thread, but all i want to say that "i've been watching this for so long, and drooling already =)" :banana4:

[cetoole]

you should be building power supples

You mean this 250 watt hipro psu is not by our Hipro?

[Revv23]

if this thing need two molex's on lots of ram, it must draw some serious amps heh, is it off the 5v or 12v? (for the most part)

[runmc]

Very nice work You are very talented.

I was gonna guess it was an alarm clock

[hipro5]

if this thing need two molex's on lots of ram, it must draw some serious amps heh, is it off the 5v or 12v? (for the most part)

It doesn't draw amps.........RAM stick does......through it......

2 x 256MB draw at 3.4Volts almost 3 amps each = 6 amps tottal at full load.........Now 2 x 512MB sticks draw about 12 amps at full load and at 3.4Volts........So one molex (5Volts) can't handle for 24/7 this load........For benchies will be OK but for 27/4 no........You could ask : Yes but are my Ram sticks going to work 24/7 at full load?.......No but why don't we be "more" pro-ffessionals.?.....

It feeds from 12Volts line (for the stabilizers) and from the 5Volts line for the output load......If you feed it without thr Ram sticks , it - by it shelf - draws some mA to work......

[hipro5]

Very nice work You are very talented.

I was gonna guess it was an alarm clock

[situman]

so basically memory will get its power from teh 5volt line. I thought it was going to run of the 12v line and I was worried my dual rail Enermax might not have enough amps.

[situman]

Also, can other peripherals be plugged into the same molexes as the ones going into the maximizer?

[Revv23]

"t doesn't draw amps.........RAM stick does......through it...... "


yes thats what i mean heh

i like that it draws from 5v as it seems everything uses 12v these days and my psu is a little low in the 12v dept, but its got tons left on the 5v

[Rabbi_NZ]

I agree, my 5vRail is massive but doesnt seem to be utilised for much... this is perfect for me.

[Revv23]

lol yeah that PCP&C must really be crying lol....

[Rabbi_NZ]

she will be once HiPro sells me one of these beasts! hehehe

[boostdfd3s]

Hey HiPro,
Im new to this forum, but stumbled upon your thread here. I took the liberty of creating a thread over at OCforums.com for ya with all the pics and some details. Maybe you should drop by and im DEF interested in one. got 2x512mb of BH-5 ready to go into a NF7-S v2

http://www.ocforums.com/showthread.p...0&page=1&pp=30

-Zach

[Revv23]

so yeah, any word on nfII compatibility?