P4 E0's 478

[ibby]

yes

Stepping SL7PM
OEM.

put this baby undersome tests..
on air and vapo

check it out ..

On Air temps varied for 45 Idle up to >65 load

[ibby]

On vapo .. i go


ALl tests done on stock volts.

4.2 crashed after 30 mins or so

my mach is making ticking tocking noises

must investigate.

I guess this cpu has much more.
Possible 4.5 gig .....

[kcnyc]

I wanna see how the Prescott E0 478s do. Go for it ibby!

[caater]

give her more voltage

[Unrealcpu]

the 3.2 EO will probbly get to 4200 stable or 4300

i would rather pick up a 3.8 EO for 400 in a few months

but by then the intel will 2mb cache in all its chips

haha

[lupacchiotto]

and the os isn't clear...very nice "toy" ibby!

[CTKP]

Where was this purchased from? I am debating whether i should update my intel rig to 775 or stick with 478, seeing as though i would then need to also purchase ddr2/pci-e gphx/mobo.

[cpulloverclock]

yes only 1.3v is ridiculous
put 1.5 and more please

[ibby]

Iam based in the UK.
I got it from a uk based supplier and it was OEM.


Is is the stock mach 1 unit.
I am not sure how much more it can take.

| am idling in + tempratures now.

The IC7 Max 3. Does it overread / underrread the temps ?
and are they read from the socket ? or a diode from the cpu ?

What memory do u guys recommend to use with, my ic7 max 3,
that does high FSB but low volts.

Ibby

[Pejsen]

Iam based in the UK.
I got it from a uk based supplier and it was OEM.


Is is the stock mach 1 unit.
I am not sure how much more it can take.

| am idling in + tempratures now.

The IC7 Max 3. Does it overread / underrread the temps ?
and are they read from the socket ? or a diode from the cpu ?

What memory do u guys recommend to use with, my ic7 max 3,
that does high FSB but low volts.

Ibby

I think the IC7 series in general are known to report way too high temps. Something like 10c above the actual temp.
And i believe it reads temp from a diode in the cpu.

To "easy" get fx 250 1:1 at pretty low volts something like 2.9-3.0 then i would get the Crucial Ballistix.

It's been a while since i used Intel so please get some Intel-dude to confirm.

Nice OC btw

[ibby]

my pc4000 giel does 260fsb ish
and then craps out.
so i really need sumat which will hit
260+ at low volts. 2.8v 2.9v

I have to run the 5:4 divider, and iam only hitting
21k on 3d mark 2001.
really I should be hitting more than that. - Well I think so.
(9800pro)

[ibby]

right guys, after some of your loving, and encoraging me to up the volts,
here is what I got.

Notice Idle and load temps. I managed to get to windows at 4.4 gig, but was crashing.
SO didnt bother with a screeney ..

Memory running at 5:4 2.9v
cpu volts 1.5125 > in the BIOS.

I need better cooling. "stable so far in windows, just under 1 hour" with CPU burn.
If I could achive lower temps at the core / load then i could get more FSB.

[ibby]

Screenies

Max voltage used 1.5125 > looking into regass now

[cpulloverclock]

Do u know if overclockers.co.uk has some E0 in stock?

[ibby]

dont know. are u wanting one ?
Ill see if i can find some one with them in stock.

[uclajd]

Screenies

Max voltage used 1.5125 > looking into regass now

Dood, you have a Vapo - put 1.6 through it!

[ibby]

ok the guys who i bough the 478 pin cpu from has 1 left of the E0.
(hes on ebay with very good feedback) he wants £105 > buy now.

Let me know cpulloverclock if you want it.
ill tell him to save it for you.

Pm me ill give u the link and info for the guy.

[cpulloverclock]

ok the guys who i bough the 478 pin cpu from has 1 left of the E0.
(hes on ebay with very good feedback) he wants £105 > buy now.

Let me know cpulloverclock if you want it.
ill tell him to save it for you.

Pm me ill give u the link and info for the guy.

I want a 3.4E

[ibby]

is that an 3.4 gig E0
?

id like one of them as well.

[cpulloverclock]

is that an 3.4 gig E0
?

id like one of them as well.

yep

I want one of them

[ibby]

iam looking for one, cant find one atm

[charlie]

yep

I want one of them

My Intel "insider" offered me one at $400.... (3.4ES E0)
He sold them in about 2 hours....

C

[DrJay]

Where do you get Intel "insiders" and how much do they cost?

[cpulloverclock]

My Intel "insider" offered me one at $400.... (3.4ES E0)
He sold them in about 2 hours....

C

lucky guy :cry:

400$ is a reduction or not???

[ibby]

charlie next time u get a cpu along those lines.
i want to buy one

My Giel mmeory has developed a fault.
Its got errors on it
so no overclocking now