Pifast Benchmark

[kakaroto]

39.73 with 3400+ newcastle 1.84v core 1x256 bh-5 3.6volt dfi nf3 cooling 2 stage phase change by "ice" of greece **thelab.gr**

woow, finally a Newcastle S754 under 40

Mine 3400+ NC is maxed at 3108MHz (310x10) 1:1 , which result lowest time 40.25

[enduracell]

Congratulations zyx outstanding score, fighting w/ an 754 is not an easy task

[jikdoc]

on an fx55 vapoLS ocz4200EL at 11x284 2.5-3-3-10.

[zyx]

Congratulations zyx outstanding score, fighting w/ an 754 is not an easy task

thanks my friend

[petervandamned]

With my new MSI k8n 0411 i can finaly do 1:1
under the 38 sec




this is with old corsair 3500 2-2-2-5

fot the specs :

oc-rig

[PMM]

zYx.... You can stop submitting your score i received it the 1st time
have all 7

Honestly you only need to send it once it will go in when I get around to updating
it, system does not work in real time.

Won't be for a few days yet.. but it will.

[Riverna]

My Score 45.35 Sec

[Garrett]

My score 44.69
I'm happier with the bandwidth though
http://home.planet.nl/~dikke332/4469.png

[zyx]

zYx.... You can stop submitting your score i received it the 1st time
have all 7

Honestly you only need to send it once it will go in when I get around to updating
it, system does not work in real time.

Won't be for a few days yet.. but it will.

ok sory. my mistake, I thought the submission form was broken

[PMM]

ok sory. my mistake, I thought the submission form was broken

Sorry m8y your right just seen your post over at Hexus so went to try
and submit a score to the database and got same error

That's why the multiple entries I had from you were showing.

the form submits in 2 different way's as a safeguard so I always get the results incase Hexus goes down I can still have the results to hand.

I don't really have the time to look at it at the mo bad time of the year

I'll try and sort as soon as

Sorry again having a moan without valid cause

[PMM]

Well cannot ftp in either so I presume some server tinkering has taken place at Hexus
sent David a PM just a matter of waiting see what occurs.

Results stopped entering the database on the 17th Nov so I have alot of back tracking to do through

Rest assured I do have everyones results even though they have not entered the database.

[Jaan]

40,44sec - AIRCOOLED! winchester 3200+

Winchester 3200+/1,8V (IHS removed) @2925Mhz 325x9 CPU, 265MHz memory (166 in bios)
Coolermaster Hyper6
MSI Neo2 Platinum, Vdimm, vcore modded
2x256MB BH5 (Corsair) CL1,5-2-2-4/3,8V
ambient temp- 0*C- open window mod

[Garrett]

plz register here too: http://www.ministry-oc.net/contests/...hp?c=1&start=0
You beat the previous air champ, HaLDoL, by almost 3 seconds

[funkflix]

40.52



Watercooled!

@Jaan

Great result! Damn, i benshed with my old Win2k ... And the Tras :4 + CL 1.5
would gives u a nice boost! I should give it a try!

[Garrett]

omg... impressive!!!

[funkflix]

omg... impressive!!!

Hmm, i can't publish any scores on the website u posted! Why?

[NoStra]

have you registered on the site?

[funkflix]

Sure! U can't connect to the resultpages without it! Strange!

[Riverna]

[SynGroW]

Hmm, i can't publish any scores on the website u posted! Why?

Use IE instead of Mozilla (firefox)

My latest score:

http://www.hardwaredome.nl/images/sy...ifast/4045.JPG
40.45s

Specs:

A64 3500+ NC @ 3003MHz
MSI K8N Neo2 (vcore modded)
Corsair TWINX512-3200LLPT v1.1 (BH-5) @ DDR546 ~3,7v CL1,5-2-2-5
Prometeia Mach II r507
OCZ DDR-Booster

[xs64]

My suck NC can't run over 2.7g
And i'm using Zalman Cu7000

[xs64]

I have a question , when it shows : Error in comptutation .... what it means ?

Thx in advance

[Thorry]

I have a question , when it shows : Error in comptutation .... what it means ?

Thx in advance

It means your CPU is unstable and wasn't able to complete the calculation without errors. Your score thus is invalid (when Error in computation is showing).

I've got the problem that there is no speed increase (more often a decrease) when going beyond 334 and I always get an error in computation beyond 336 (no matter what mem dividers, chipset voltages or cpu multiplier)

My score:
40.61

http://www.thorry.net/pifast-4061.JPG

Winchester 3000+ @ 3 ghz
Mem won't get up to the high speeds, maybe my BH-5 needs replacing

[Garrett]

It means your CPU is unstable and wasn't able to complete the calculation without errors. Your score thus is invalid (when Error in computation is showing).

I've got the problem that there is no speed increase (more often a decrease) when going beyond 334 and I always get an error in computation beyond 336 (no matter what mem dividers, chipset voltages or cpu multiplier)

My score:
40.61

http://www.thorry.net/pifast-4061.JPG

Winchester 3000+ @ 3 ghz
Mem won't get up to the high speeds, maybe my BH-5 needs replacing

So the 9x multiplier is holding you back now, right?

[Thorry]

Right MP 9x sucks.

I'm tweakin at the moment, memtest86 now 5th run on test #5.

260x9 1:1 CL2 1T 2-2-2-5

Had to low LDT to 3x to get it up to 260.

265 gives errors at run #2