Winchester 90nm and Prime95

[bachus_anonym]

all right... as promised i'm coming back with some more Prime95 testing
after countless voltage configs i gave up on 265x10 couldn't run Blend for more than 3 hrs... so i lowered the OC to 260x10 but cranked up vcore and vdimm just to be sure and hoping that my Winnie takes the heat

and here's my "over 15hrs" of Prime95 Blend i think it's pointless to run it over 24hrs. i stopped at 15th hour because i need to see how low on voltages i can go...

260x10=2605MHz @ 1.82v REAL LOAD, DDR520 6-2-2-2.0 @ 3.88v REAL LOAD;OCZ DDR Booster

MSI K8N Neo2 Platinum - Q47353.1 0440A2 S Taiwan
A64 3200+ 90nm "Winchester" - CBBFD 0441UPCW
Thermalright XP-90 w/ YTech 120mm

CLICK for Full Size Screenshot - 2048x1536 302KB