High voltage lovin voltmaster, pics , specs , release date

[Rabbi_NZ]

Awesome idea STEvil, once you get through with prelim testing of the VX could you compare to your BH6 & CH5 in the same post?

[STEvil]

ch-5 (2x512) tops at 245 1.5-2-2-0 3.3v, bh-6 (2x256) tops at 250 1.5-2-2-0 3.3v

Looks like i'll have to reinstall windows I guess.

Should learn to use ghost or whatever it is..

[Schaef]

Good work ocz. Nice to see your giving something back to the enthusiast overclocking/gamers which is priced well and is ment to have it balls clocked off. Hopefully products like this will show more of the online community that overclocking is safe and can give great results which many of the people who I play with wont think about overclocking and think of it as stupid :S

Also there was alot of talk about the mem controller of the a64s and that giving the mem to much voltage would kill the cpu. I never saw a post that answers the question. Do any of the ocz guys know if putting 3.5 volts into the mem will damage the a64 or is this a whole lot of bs.

[ryanpgroovy]

We do it here with no bad results yet , but we seldom run more that 3.3 for days on end

[nutcase]

Holy crap, 2x512MB DC @ 270Mhz 2-2-2-7. I wonder if it's 1T....

yes it was at 1T..(that was me that ran that benchmark).. Still trying to get the cpu stable at 2700 Mhz though..

[STEvil]

Seems my bench drive is cooked.. gonna miss that little 4gb 10k scsi. I'll have to pick up a hdd in town tomarrow.

Will play with memtest and keep you guys updated with what they can do there I guess

[nutcase]

well, Took mine to 285 FSB...

MSI K8N Neo2 Platinum
Winchester 3500+
2x512Mb OCZ PC3200 Gold edition VX @ 2-2-2-7 1T and 3.5V
OCZ DDR booster
OCZ Powerstream 520W Psu

Air cooled with XP90 and panaflo 92mm..

And if you are wondering why I am using 9.5X Multi... Blasted system will not run at 9X with this ram for some reason..

[iboomalot]

Thats some great info and looks like I will be keeping my 3700EB since my ASUS
won't go over the magical 3.0v needed.


but its nice to know this will be avil when I get a better OCers mobo if and when a
decent s939 mobo comes to the market.



while I was typing this the above post appeared.

Has the bugs been worked out of the MSI mobos??

and would I see a big gain over my OCZ 3700eb when its at 3.3v+ vs the VX

[nutcase]

Thats some great info and looks like I will be keeping my 3700EB since my ASUS
won't go over the magical 3.0v needed.


but its nice to know this will be avil when I get a better OCers mobo if and when a
decent s939 mobo comes to the market.



while I was typing this the above post appeared.

Has the bugs been worked out of the MSI mobos??

and would I see a big gain over my OCZ 3700eb when its at 3.3v+ vs the VX

I have both the MSI and the A8V...

The MSI overclocks much better But the A8V is a much more stable motherboard..

[STEvil]

memtest is clean so far at 1.5-2-2-0 250mhz 3.3v

Have tried 3 bios reflashes, still cant get past 3.3v to mem.

[Playful_Buffalo]

better than expected by 1.5 do you mean CAS 1.5?

[STEvil]

yes, CAS 1.5.

[trans am]

well, Took mine to 285 FSB...

MSI K8N Neo2 Platinum
Winchester 3500+
2x512Mb OCZ PC3200 Gold edition VX @ 2-2-2-7 1T and 3.5V
OCZ DDR booster
OCZ Powerstream 520W Psu

Air cooled with XP90 and panaflo 92mm..

And if you are wondering why I am using 9.5X Multi... Blasted system will not run at 9X with this ram for some reason..

Dude I must have had too many beers! Somebody pinch me! Did I just see 2x512 do 2-2-2 @285mhz? this is getting out of control! Never have I seen a screen of 2x512 at this speed at 2-2-2 timings. OCZ IS FVCKING AMAZING!

[jagare]

With an Allied 500W PSU, will I be able to do 3.5v with a Neo2 out of the box with a OCZ DDR Booster?

[Playful_Buffalo]

how are your rails holding up now?

[trans am]

With an Allied 500W PSU, will I be able to do 3.5v with a Neo2 out of the box with a OCZ DDR Booster?

Man I still can't get over that 285 2-2-2 screen. What were you saying?

[nutcase]

With an Allied 500W PSU, will I be able to do 3.5v with a Neo2 out of the box with a OCZ DDR Booster?

you should be able to.. The DDR booster does not use 3.3V for the Vdimm but uses 5V... Don't know how well the PSU will handle the load though as I have never used an Allied PSU..

[quicksilverXP]

Trans Am... you're running the half-multi.. so it's actually less than 285... still awesome though..

[trans am]

Trans Am... you're running the half-multi.. so it's actually less than 285... still awesome though..

You're right... I missed that.
ok so 270.75mhz at 2-2-2!!!!!!!! that's still sick for 2x512!

[nutcase]

You're right... I missed that.
ok so 270.75mhz at 2-2-2!!!!!!!! that's still sick for 2x512!

Yep.. The .5 Multi's are funny.. But able to run at 273 FSB at 9X Multi...

Time to run some Memtest runs and burn the Ram in

[quicksilverXP]

how'd you guys get the sticks so early?

[TEDY]

i think i pissed my pants seing 2*512 270!!!

[SteveOCZ]

how'd you guys get the sticks so early?

They are our beta testing team. No better way to test out ram than sending to to some crazy overclockers like these guys

[bias_hjorth]

How do you get on that team

Very good numbers for 2 x 512mb

[ArcTan]

They are our beta testing team. No better way to test out ram than sending to to some crazy overclockers like these guys

no wonder eva2000's got some