High voltage lovin voltmaster, pics , specs , release date

[perkam]

I said dont flame me ppl and it WAS an honest question, I was asking for a show of hands, not a show of fists....Sheesh

Sorry to derail the thread

[conrad.maranan]

"...offensive post here..."

This is not a very intelligent question. It's bad enough this thread is going down in smoke. You might as well make the most of it and delete your post.

[trans am]

OK, guys, I'm removing all my posts, it's bad enough that I'm crapping the ocz thread(with my humor) but I never intended this to turn into a racial issue. sorry Ryan.

[Nanobot]

Could anyone at OCZ show us the VX's max frequency at say... 2.5-3-3-7 or something similar with a bandwith screenie(everest,memtest ...) .

The reason I'm asking is that I'm having second thought about the VX now that I know a new CPU past week 33 with a better mem controller will unleash my 3200 rev2 plat.

EDIT:Like Trans am I deleted my pervious post not relevant to this thread,I encourage other members to do the same;let's keep this thread on topic!

[xgman]

don't know if these user experience posts have been posted here yet, but worth a look:

http://www.truextreme.com/forums/showthread.php?t=35033
http://www.dslreports.com/forum/rema...ode=flat?r=329

[Torin]

Holy crap, 2x512MB DC @ 270Mhz 2-2-2-7. I wonder if it's 1T....

[trans am]

Dude if that's 1t that will kill tccd at 300mhz 2.5-3-3. Superpis score will be lower with 2-2-2@270 1T I'm almost certain.

[SteveOCZ]

It's 1T.....you wouldn't get numbers like that at 2T

[trans am]

It's 1T.....you wouldn't get numbers like that at 2T

I can't wait to see some benches with the 2-2-2 at 270 vs. 2.5-3-3-7 @ 300mhz. Any idea how much difference in something like super pi or 2001se? I can't wait to test it.

[conrad.maranan]

So OCZ PC3200 Gold VX is the official name for this product? Now I know what to look out for.

[Torin]

Well, this is certainly new territory for DDR. Even BH-5 couldn't get near 270MHz with 2 512MB sticks in DC @ 1T, even using 3.9V.

[ar7786]

don't know if these user experience posts have been posted here yet, but worth a look:

http://www.truextreme.com/forums/showthread.php?t=35033
http://www.dslreports.com/forum/rema...ode=flat?r=329

Too bad it's not good for intel system.

[Playful_Buffalo]

Impressive A64 results

[FX Freak]

very nice results the new better bh5

[agenda2005]

I said dont flame me ppl and it WAS an honest question, I was asking for a show of hands, not a show of fists....Sheesh

Sorry to derail the thread

My post is removed because of the maturity shown by others and the respect I have for OCZ.

[RacerX]

I can't wait to see some benches with the 2-2-2 at 270 vs. 2.5-3-3-7 @ 300mhz. Any idea how much difference in something like super pi or 2001se? I can't wait to test it.

Not quite what your looking for but you can get a good idea anyways........

Corsair XMS3500 rev1.1 bh-5 10x260 2-2-8-2-1t


OCZ PC3200EL Plat. rev2 TCCD 10x260 2-3-8-3-1t




Sorry can't go any higher than 2.65 with my 3400dtr and has a crappy memory controller to boot. When I had my 3200+NC CG I tested my bh-5 at 10x270 2-2-8-2-1t against TCCD at 9x300 2.5-3-8-3-1t and the TCCD came out on top.

Here's OCZ PC3200EL Plat rev2 TCCD 9x288 2.5-3-8-3-1t

[Ubermann]

That was one small difference.
Is it really that small ??
Intressting.

[RacerX]

That was one small difference.
Is it really that small ??
Intressting.

I'll be honest my DFI board is really weird. I mean when I bench between 260-275htt I basically get the same performance, its not until I go over 280htt where the board really begins to shine.

I think the 939 chipset will benefit running 2-2-?-2 1t compared to 754. Then again with all the testing I've done it really seems the NF3 chipset doesn't really take advantage of ultra tight timings.

I easily prefer 9x300 relax over 10x270 tight on my DFI.

[trans am]

Thanks, very interesting indeed.

[BeSaiD]

i'm following the thread since the first day, but today i've been accepted as a forum user and this is my first post

I'm looking forward to have them in Spain as soon as possible :P Any date or something like that of distribution in Europe?

thank you

PS: I will perform my english writing here, so please, forgive my writing errors :P

[ryanpgroovy]

The shipments are already on the way to europe , best thing is to check with your local retailer for the arrival date

[BeSaiD]

¡Disponible el 4 de Diciembre! (on sale on december 4th)
PC-3200 Dual Gold Voltage eXtreme 2x512MB
[OCZ4001024EL] 348.00EUR (348.00 Euro = 458.860 USD)


A bit (a huge bit :P) over my possibilites... I almost buy 4x512 at the USA for the same price...

Thank you.

[bachus_anonym]

That was one small difference.
Is it really that small ??
Intressting.

little bit OT here, but wanted to point out that 170 3dmarks difference is quite significant.
to give you an idea... on my AXP-M with BH-5 difference between 251x10 (2515Mhz) and 251x11 (2765) is 300 3dmarks. memory bandwidth difference between x10 and x11 is only ~1%.
in other words for every 100Mhz increase on CPU i get 120 3dmarks...
i would say that IT IS A LOT!

[ryanpgroovy]

I have no clue why the heck there charging that much

Thats 200 dollars over MSRP,

Can you direct me to the retailer so we can tell them to get the price in line with reality

[STEvil]

EDIT - BENCHMARKS!!

Just got back from the "post office"

Quick results (less than an hour of playing)

9x250.82mhz / 3.30v / 1:1 / 1T / 2800+ Clawhammer / DFI Lanparty-UT 10/15 4.0vdimm with OCZ Memtest 1.00 / 2x512 OCZ Voltage Extreme

Everest Read / write / latency
1.5-2-2-0 --- 3816 / 1432 / 41.4
1.5-2-2-5 --- 3824 / 1436 / 42.3
1.5-2-2-10 -- 3818 / 1437 / 42.3
2-2-2-0 ----- 3847 / 1575 / 41.5
2-2-2-5 ----- 3848 / 1579 / 41.6
2-2-2-10 ---- 3846 / 1576 / 41.5
2.5-2-2-0 --- 3824 / 1454 / 42.8
2.5-2-2-5 --- 3821 / 1442 / 42.8
2.5-2-2-10 -- 3815 / 1442 / 42.8
3-2-2-0 ----- 3797 / 1424 / 46.3
3-2-2-5 ----- 3804 / 1408 / 46.4
3-2-2-10 ---- 3809 / 1400 / 46.3

Sisoft Buffered

1.5-2-2-0 --- 3834/3834
1.5-2-2-5 --- 3835/3834
1.5-2-2-10 -- 3834/3834
2-2-2-0 ----- 3830/3830
2-2-2-5 ----- 3831/3830
2-2-2-10 ---- 3831/3831
2.5-2-2-0 --- 3828/3828
2.5-2-2-5 --- 3827/3827
2.5-2-2-10 -- 3827/3826
3-2-2-0 ----- 3835/3830
3-2-2-5 ----- 3832/3833
3-2-2-10 ---- 3833/3833

Sisoft Unbuffered

1.5-2-2-0 --- 2257/2299
1.5-2-2-5 --- 2249/2293
1.5-2-2-10 -- 2237/2278
2-2-2-0 ----- 2165/2225
2-2-2-5 ----- 2180/2227
2-2-2-10 ---- 2191/2242
2.5-2-2-0 --- 2191/2246
2.5-2-2-5 --- 2191/2244
2.5-2-2-10 -- 2185/2244
3-2-2-0 ----- 2143/2208
3-2-2-5 ----- 2154/2208
3-2-2-10 ---- 2138/2208

EDIT

Think I just killed the OS.. goes to load windows and then BSOD comes up with unmountable drive or something.. if you know a quick fix post it here or pm me, i'm gonna go eat

EDIT

Benchmarks updated!!!! Thats a lot of benches to pull off.. i'm all benched out for the night I think Nearly pulled a 38s super_pi 1M @ 1.5-2-2-0 with 9x250.82.. not bad for under 2300mhz and no tweaking beyond cas/trcd/trp/tras hm?