OCZ DDR Diagnostic Booster Works on these Motherboards.

[Joe Camel]

this is a post in the "S939 mobos - known bugs, tweaks and fixes" thread:

some info on the:

Abit AV8
AGP-lock working
stable Vcore up to 1.85v
vdimm overvolts to 2.85v on highest setting, OCZ Booster working
use slot 1&2 for BH-5, 3&4 for TCCD.
BH-5 doesn't work well at all, no matter what voltage
runs great with tccd memory
CPU-temp readings way off

well, i just grew balls (or REALLY need to sleep...)
OCZ DDR Booster is in and running on my AV8
DDR @ 3.0V and DDR VTT is tracking (reads 1.54V)
upping on the fly...3.3V but VTT is still 1.55...3.4 but 1.5...

upped (in bios) DDR to 2.8 (max)...booster@3.2V VTT@1.66
could be bios setting could be reboot...

not real stable or "Mushie 222 rev 2"s ("new"? TCCD) dont like >3.0V...

be ready to get a fan on your MEM...pups got HOT!

[TMFX]

well, i just grew balls (or REALLY need to sleep...)
OCZ DDR Booster is in and running on my AV8
DDR @ 3.0V and DDR VTT is tracking (reads 1.54V)
upping on the fly...3.3V but VTT is still 1.55...3.4 but 1.5...

upped (in bios) DDR to 2.8 (max)...booster@3.2V VTT@1.66
could be bios setting could be reboot...

not real stable or "Mushie 222 rev 2"s ("new"? TCCD) dont like >3.0V...

be ready to get a fan on your MEM...pups got HOT!

Where is the VTT option of AV8?

[andyOCZ]

Where is the VTT option of AV8?

There is no option for VTT. He was saying that as he adds DDR voltage the VTT follows like it should. Some boards will not do this.

[Desk-Star]

HI!
I was lookin around, and i couldn't find out if DFI Ultra Infinity NF4 is compatibile
with OCZ DDR Booster.

DFI Ultra Infinity NF4 isn't mentioned here
http://www.ocztechnology.com/display...ocompatibility

so i wonder, if i can plug in BOOSTER? And if i can , in witch slot?

I would be grateful if someone could answer my question.

[Desk-Star]

Anybody?

[RyderOCZ]

HI!
I was lookin around, and i couldn't find out if DFI Ultra Infinity NF4 is compatibile
with OCZ DDR Booster.

DFI Ultra Infinity NF4 isn't mentioned here
http://www.ocztechnology.com/display...ocompatibility

so i wonder, if i can plug in BOOSTER? And if i can , in witch slot?

I would be grateful if someone could answer my question.

That motherboard is a 24pin model...we do not test the booster with any 24pin boards because the booster harness is only 20pins.

[Black Phoenix]

But you had tested on DFI nf4 all models, and as i know this board is 24 pin atx. So it's proved that he have to try and then say something, right...

[RyderOCZ]

But you had tested on DFI nf4 all models, and as i know this board is 24 pin atx. So it's proved that he have to try and then say something, right...

AndyT (AndyOCZ) tested on his personal board and found it to work, yes.

Officially, OCZ does not test the booster on any of the 24pin motherboards

[andyOCZ]

But you had tested on DFI nf4 all models, and as i know this board is 24 pin atx. So it's proved that he have to try and then say something, right...

The DFI boards have extra power connectors on the board and handle power differently than most boards. Some boards don't even use the extra 4 pins on the 24 pin at all. Some boards will blow up iof the booster is used. If you try it you could have a bad experience unless you know it is a working combo.