Ram with Samsung TCCD - Listing

[ojdr2001]

OCZ PC4200 EL PE 2x512 DC

Only 2,85V 1T

MSI 939 + FX55

[computersmsa]

Hello,

The ADATA PC4800, is Hynix B or TCCD
I have receive two stick ... one TCCD and one Hynix B

Stick A

Vdimm = 2.8V
210 Mhz 2-2-2-5
251 Mhz 2-3-3-5
269 Mhz 2.5-3-3-6
318 Mhz 2.5-4-3-6
Vdimm = 3.1V
Pareil, voir 2 Mhz en plus
TCCD detecded


Stick B

Vdimm = 2.8V
2-2-2-5 pas possible
253 Mhz 2-3-3-5
270 Mhz 2.5-3-6
Vdimm = 3.1V
265 Mhz 2-3-3-5
281 Mhz 2.5-3-3-6
Timing de merde pour monter plus haut ...

Pas TCCD, donc Hynix B

Please, buy PC4500 ADATA, and not PC4800 ...
PC4800 is most expensif, and not better, and risk og have Hynix B

[qk4722]

good job

My Apacer TCCD Real500 Dual 2.7v 2.5-4-4-8 DDR600 1T p95 runing

OCZ PC4200 EL PE 2x512 DC

Only 2,85V 1T

MSI 939 + FX55

[chinabox]

these are my 2x512 adata pc4800 running 200mhz 2-2-2-5 1T 2.8v
gonna push the system later today since i just got this 90nm baby
and my "old" 130nm didnt go further than 10x265

think my bios is a lil buggy tho and im gonna try seeing what the new 1.4b1 bios does

[Jethro]

Patriot XBL is some juice loving ram indeed now that ive went 2 2 2 7 timings @ 222FSB with 2.85 volts it doesnt want to run well at any less voltage ! Anyone wanna sell a booster

[TEDY]

anyone has better picture of A-DATA DDR 566 module ?

any sticker sticked on it ?

[burnhead]

@jethro: your sig?? --- Aud2-->Aud2 hack --- what is that? what does it do? an how can i do it?

[computersmsa]

anyone has better picture of A-DATA DDR 566 module ?

any sticker sticked on it ?

http://www.bel-hardware.be/a64moc_1.html

[Jethro]

It allows me to use latest Audigy2 software and drivers on my card. i dont have link but you should be able to find linkage via google man. The mod is worth doing IMO for the better performing drivers alone.

[TEDY]

http://www.bel-hardware.be/a64moc_1.html

[burnhead]

what is being done with doing that mod? and why can´t you use this latest drivers on your brand new audigy 2?

[jmke]

for the Audigy questions: http://www.madshrimps.be/forums/show...ghlight=audigy

[xviz]

just got this mail from twinmos (regarding BP)

Hello,

we use no Brainpower PCB but our TwiSTER pro showed in different tests that they don´t have to hide behind BP PCB modules.

Mit freundlichen Grüßen / Best regards,
Alexander Rüdinger

[zett]

how high does average tccd goes with 2-2-2-5 1t ,and whats the max volt can it be used for daily use?


my system:

A64 3000+@2,7 ghz daily with waterbox
Epox 8KDA3J with vdimm moded
ocz pc3200 platinium rev 2.

[jjcom]

average....I'd guess something like 250-240s...I'd give em about 2.8v or so. Altho it might not go that high on that tight of timings, but those TCCD sticks sure seem to be doing well.

[burnhead]

How is A-DATA DDR 566 doing? And are they Brainpower PCB?

[Jethro]

the best mine will do @ 2 2 2 7 is 225 FSB but my kt600 board is very sensitive to mem timings. it responds to em really well also . Currently @ 2 2 3 7 @ 235 FSB 2.85v

[Naughtyboy]

Is there any way to tell if the sticks has BrainPower PCB or not...????

[Xerxes]

yeah it says right on the end of the pcb so you dont even have to take the heatspreader off. for instance my pqi says b6u808 which is the 808 pb pcb

[halcyon]

Read through the whole of this thread, but couldn't find anyone, but gotta ask:

Anybody tried 2 x 1024 MB (= 2GB total) on any A64 board with TCCD chips?

What speed / latencies did you manage to squeeze out of them?

[Jethro]

the Patriot XBL is indeed the 815 pcb. thanks for the tip xerxes!

[jjcom]

I've got OCZ DDR400 EL RAM...I'm trying to remember what type of chip it has....it might be BH-5 but I don't remember....any idea?

[j0j0]

have someone tested this ones ?
http://www.oc-wear.de/pd2053558574.htm?categoryId=26
the price is not too bad...

[TEDY]

have someone tested this ones ?
http://www.oc-wear.de/pd2053558574.htm?categoryId=26
the price is not too bad...

not bad

DDR400 CL 2-2-2-5 @2,6V
DDR466 CL 2-3-3-5 @2,8V
DDR533 CL 2,5-3-3-5 @2,8V
DDR560 CL 3-4-4-8 @ 2,8V

[Susquehannock]

From the looks of it the "E" TCCD overclock a tad better then the "F".

Anyone know which BP the G.skill "LE" modules are using? 808 or 815?

Trying to decide before buying. ..... ThanX