Page 1 of 3 123 LastLast
Results 1 to 25 of 64

Thread: 6800GT overclocks

  1. #1
    Registered User
    Join Date
    Nov 2004
    Location
    Belgium
    Posts
    9

    6800GT overclocks

    Does anyone have any experience with overclocking a 6800GT. Mine is a Point of view. I haven't tried overclocking it yet... but I do want to know what to expect. The card only has one power connector so I think this might be a limiting factor, it has its own power line though. My PSU is a themrlatake butterfly 480W (should be enough).
    A64 3500+ @ 11*230
    1 gb Corsair pc4000 v3.3
    Point of View Geforce 6800GT
    MSI K8N NEO2
    All watercooled by Innovatek
    2*160gb SATA
    Creative Audigy 2
    Creative soundworks s750 7.1

  2. #2
    Xtreme Enthusiast
    Join Date
    Oct 2003
    Location
    Alpine, TX, USA
    Posts
    672
    Well I think I have the worst of the bunch It seems like most will hit Ultra speeds (400/1100), but mine isn't even close. Tried the core twice at 375MHz and it locked in 3D Haven't bothered trying lower yet (or the memory) as it's so piss-poor. Btw, it is PNY made.

    Hope you have better luck with yours

    Redline 3D Socket 754 = 40,179
    Retired

  3. #3
    Bulletproof
    Join Date
    Jan 2003
    Location
    Shun low, K?
    Posts
    2,553
    400/1025-430/1150 depending on rig and other factors.

  4. #4
    Xtreme Member
    Join Date
    Feb 2004
    Posts
    188

    Oc Gt

    I had a Chaintech 6800GT that ran 435-1100 Stock cooler, stock v.

    Pretty nice looking card too.

    musk

  5. #5
    Xtreme Recruit
    Join Date
    Oct 2004
    Posts
    81
    My eVGA with 1.4 volt bios and NV silencer 5 will run 440/1200, but its not 100% stable, just benches. I run it 420/1150 day to day.

    Kanati

  6. #6
    Banned
    Join Date
    Jan 2004
    Posts
    240
    Should of gotten Gainward Golden Sample. It does 400/1100 just like Ultra model right out of the box. Research helps alot.

  7. #7
    Xtreme Addict
    Join Date
    May 2004
    Location
    Perth, Western Australia
    Posts
    1,622
    you dont need a crappy gainward there for noobs like thermaltake
    twilius basic sounds like u need a new psu
    Quote Originally Posted by bh2k
    sorry m, OI'm a bit drunkz!
    Air benches with 3000+, DFI nf3 and 6800GT 2001SE: 26312 3d03: 13028

  8. #8
    Banned
    Join Date
    Jan 2004
    Posts
    240
    Quote Originally Posted by reject
    you dont need a crappy gainward there for noobs like thermaltake
    twilius basic sounds like u need a new psu
    hehehe for noobs??? How you figure?? Gainward is a great company. I have 0 problems with my golden sample.

  9. #9
    Xtreme Enthusiast
    Join Date
    Feb 2004
    Location
    Sweden
    Posts
    970
    They overcharge a L O T!
    Opteron 165
    Dfi NF4 Expert
    4x1 1GB twinmos PC 3200
    XFX 7900GT 550/1500

  10. #10
    Xtreme Recruit
    Join Date
    Oct 2004
    Posts
    81
    Quote Originally Posted by Crankster
    They overcharge a L O T!
    This man speaks truth. I only paid $350 for my eVGA and it does quite well.

  11. #11
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Dublin, Ire.
    Posts
    225
    My MSI runs @ 420/1120 for everyday use, fan speed set at low...
    Shuttles 250W psu is enough for it

  12. #12
    Xtreme Legend
    Join Date
    Feb 2003
    Location
    Warsaw, Poland
    Posts
    1,648
    440/1200 air cooled

  13. #13
    Xtreme Member
    Join Date
    Dec 2003
    Posts
    157
    ^ what he just said
    Gigabyte P55 UD5 | i5 750 @ 4.00GHZ | HD5850 | Corsair 650w

  14. #14
    just bacon
    Join Date
    Jun 2004
    Posts
    393
    stock sink with stock 1.3v bios

    432/1.15

    tho i run at 400/1100 day to day
    If i have to read one more "watercooling ram" thread im guna bring the damm roof down

    PC in a fridge idea comes a close second
    Mail me gmail

  15. #15
    Xtreme Member
    Join Date
    Oct 2003
    Location
    germany
    Posts
    412
    PNY VERTIGO 6800GT
    stock volts - stock cooler
    400/1100 for 24/7 use

    for benching even more.

  16. #16
    Xtreme Member
    Join Date
    Nov 2003
    Posts
    157
    My EVGA would only do 370/1100 at stock settings. Upping the voltage to 1.4 got me to 400/1100 and putting a Danger Den NV-68 block on it got me to 460/1200. That's a 100% stable speed, I can do 473ish/1230-1250 for a bench run but I get artifacting.

    Warden
    --------------------------------------
    AMD64-3500@10x256 (2560mhz)
    Abit AV8
    Evga 6800 GT @ 460/1200
    Dangerden TDX and 6800 Block
    Blueline HD30 Waterpump
    Dual 120mm Fans and Radiator setup
    http://service.futuremark.com/compare?2k3=3054009
    http://service.futuremark.com/compare?3dm05=22188

  17. #17
    Xtreme Enthusiast
    Join Date
    Oct 2003
    Location
    Alpine, TX, USA
    Posts
    672
    Quote Originally Posted by The Virus
    Should of gotten Gainward Golden Sample. It does 400/1100 just like Ultra model right out of the box. Research helps alot.
    Not all of us have lots of extra $$ to blow


    Quote Originally Posted by reject
    twilius basic sounds like u need a new psu
    My 2-yr-old Antec TP 430W not enough? Great, MORE money down this rat-hole

    Redline 3D Socket 754 = 40,179
    Retired

  18. #18
    Xtreme Member
    Join Date
    Mar 2004
    Posts
    139
    Of course not, you need a Shuttle cube 250W minimum. :P

  19. #19
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    happy place
    Posts
    2,337
    PNY verto 6800 GT:
    445/1150 with bios 1.4v mod

    Asus V9999 gamer's edition 6800nu:
    434/1100 with bios/soft mod , 16x1,6vp

    temps are remarkably good 56c idle
    --===== proud owner of new razor tarantula gaming keyboard =====--

  20. #20
    Xtreme Addict
    Join Date
    Aug 2002
    Posts
    1,202
    XFX GT at 430/1175 for 24/7 but will do 445/1225 for benching stock cooled. The best one i had was a PCI-E reference design from nVidia that could do 450/1230 out of the box.

  21. #21
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Dublin, Ire.
    Posts
    225
    Quote Originally Posted by Skeet
    Of course not, you need a Shuttle cube 250W minimum. :P
    :P, it does a hell of a job though, don't u think ?

  22. #22
    Registered User
    Join Date
    Jul 2004
    Location
    Finland
    Posts
    17
    Quote Originally Posted by Kanavit
    PNY verto 6800 GT:
    445/1150 with bios 1.4v mod

    Asus V9999 gamer's edition 6800nu:
    434/1100 with bios/soft mod , 16x1,6vp

    temps are remarkably good 56c idle
    Could you send your BIOS? I have V9999GE too and problems getting it working over 400/1100 16/6. Got OCZ 520W and getting lockups, disabled all throttling/internal clock tests with rivatuner.

  23. #23
    Xtreme Addict
    Join Date
    Jan 2004
    Location
    Manchester (UK)
    Posts
    1,105
    Quote Originally Posted by reject
    you dont need a crappy gainward there for noobs like thermaltake
    haha, gainward golden sample cards are very good overclockers Higher stocks speeds and higher overclocked speeds.

    Im looking to get a 6800GT for my a64 939 shuttle. Would have to be a 'one slot design' card. Either the gainward one slot card, asus gamers edition if I can find either of them.

  24. #24
    Xtreme Member
    Join Date
    Mar 2004
    Posts
    139
    Quote Originally Posted by RootX
    :P, it does a hell of a job though, don't u think ?
    Heard Fortron actually are the once building them so it doesn't surprise me.

  25. #25
    Xtreme 3DTeam Member
    Join Date
    Aug 2003
    Location
    Germany
    Posts
    1,875
    Chaintech 6800GT 1,4V Bios 430/1250 MHz .
    PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
    Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
    Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.


Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •