Quote Originally Posted by CODE 4
Are you maxed out on Volts to the memory? Make sure it is @ 2.8V. Try running the ram at the loosest timings. Here is what you need to set it to, I think:

Starting at the first # of the ram speeds Try:

8 3 11 A(Auto) 3 A A 8 3 A

Disable 2T

Lemme know what haps, GL
It didnt work but im not sure if i adjusted the settings as you described. I am a bit Noob concerning RAM.

My bios settings for RAM are as follows (in correct order)

CAS, TRC, TRFC, TRCD, TWR, TRWT, TRAS, TRP, TWCL.

I did disable 2T and adjusted VDDR to 2.8 and tried CAS 3 but that didnt work. Wierd because my Dual kit is DDR500 Certified so 250MHz should be standard for them.