k-ohashi Pentium-M LN2 is cooling25 second, ID3.3G

[kyosen]

Hello, I'm k-ohashi as known as kyosen
Thanks for your interest to my OC result!
...and thanks especially to sxs112 for beginning new threads

> another interesting note - it seems that pci/agp lock is missing? :o
--
AGP/PCI lock is available on AOpen i855GMEm-LFS!
I simply want AGP clock for 3DMark etc. and also want to show
robustness for higher AGP/PCI clock of this motherboard

I'll try LN2 cooling again...in FSB/mem=3:5mode.

[caater]

Hello, I'm k-ohashi as known as kyosen
Thanks for your interest to my OC result!
...and thanks especially to sxs112 for beginning new threads

> another interesting note - it seems that pci/agp lock is missing? :o
--
AGP/PCI lock is available on AOpen i855GMEm-LFS!
I simply want AGP clock for 3DMark etc. and also want to show
robustness for higher AGP/PCI clock of this motherboard

I'll try LN2 cooling again...in FSB/mem=3:5mode.

Oh, nice to see you here.. good job on that mobile
btw, is dothan more low temperature tolerant than prescott?
afaik prescott hangs if temp goes lower than ~150C...

And.. try to get x800 for 2001se goodness

[kiko]

Hello, I'm k-ohashi as known as kyosen
Thanks for your interest to my OC result!
...and thanks especially to sxs112 for beginning new threads

> another interesting note - it seems that pci/agp lock is missing? :o
--
AGP/PCI lock is available on AOpen i855GMEm-LFS!
I simply want AGP clock for 3DMark etc. and also want to show
robustness for higher AGP/PCI clock of this motherboard

I'll try LN2 cooling again...in FSB/mem=3:5mode.

hi kyosen i am waiting for this board and i would like to know if is possible to use 3:5 beyond 133 FSB and if 237/238 is the limit of your ram at 3.2v.
10x (thanks)

Ciao

[Learn]

Hello, I'm k-ohashi as known as kyosen
Thanks for your interest to my OC result!
...and thanks especially to sxs112 for beginning new threads

> another interesting note - it seems that pci/agp lock is missing? :o
--
AGP/PCI lock is available on AOpen i855GMEm-LFS!
I simply want AGP clock for 3DMark etc. and also want to show
robustness for higher AGP/PCI clock of this motherboard

I'll try LN2 cooling again...in FSB/mem=3:5mode.

good luck kyosen
24s 23s?