-=Dfi Infinty&LanParty Rev B Faq and more=-

[Slimmie]

Hi guys,

I need some serious help.

My spec's:

Mobile 2600
Infinity mobo
OCZ dual channel 2x512 pc 4200
ATI R9800xt

I had a 230 fsb with the stock bios. This was stable.
But somehow I can't past 200 anymore. It's very unstable. That's very weird because I hit the 230fsb for the very first time. And now not even past the 200. I want to get that 230 fsb again. I also have tried beta and alpha bios with no succes.

What should I do?
Please help me.

[Blackout]

could someone try this bios

http://black.s3.cybton.com/N24LD138.zip LP B

some new features like shutdowntemp, warn temp,

beta options like 1.5cas, 3.4-3.6vdimm (probably won't work)

1/21 romsip


use at your own risk!
don't use it without bios savior

[Naasar]

hey guys,

anyone know where i can find out what the lights on my keyboard flashing means? i cant seem to find codes anywhere.

it flashes on for like 1 or 2 secs then goes off. then it repeats this over and over...

i have tried 2 different cpus, different ram

[PORTUGAL]

Originally posted by Blackout
could someone try this bios

http://black.s3.cybton.com/N24LD138.zip LP B

some new features like shutdowntemp, warn temp,

beta options like 1.5cas, 3.4-3.6vdimm (probably won't work)

1/21 romsip


use at your own risk!
don't use it without bios savior

i tested and 3.4 3.5 and 3.6 only gives 2.6v
cas 1.5 doesnt work with me,seens to be the memory,i try evem at 100mhz fsb and 3.3 vdimm,the board beep beep and only light up led number 3.

so if it is possible to ad more cas values?so 1.95 1.90...and others?

[mysticdrew]

hmm, what is the SB Vdd mod actually for?

also is there guide on the cap mods? it's hard to see with all that tape

[Massive]

Originally posted by Massive
Yes...so I guess I won't be able to use my rig for a while until I get my new Barton ...
All of the four led indicator is on anyway...but it don't even post to BIOS..
I still think its kinda strange...I guess none of the LP B user use their system with low proc like Duron...so its kinda forgotten on BIOS update...

I'll give u an update until I get my new Barton...if its worked...then it must be the mobo that doesn't compatible with Duron...
On my previous mobo EPOX 8RDA+ this Duron is worked fine...and I switch my Barton and Duron without a hitch...I still choose for the EPOX if it only could do high FSB without modding.......

or maybe someone got somethin I should try again?

Sorry, I try to confirm my previous posting about LP B with 1/31 BIOS won't work with Duron Morgan core...

And YES...it just won't work with Duron morgan core...because when I have my new Barton mobile it doesn't have problem and the comp went perfectly fine...when I try to change it with Duron morgan core again...it won't post to anything not even a single bip...

so maybe this news could be useful for those of u which has LP-B with 1/31 BIOS which considering put Duron MOrgan core on it

[AlvoMod]

anyone can help me.... i need to buy new memoery for my lanparty.
I i dont know how to choose.

the options are.... only in 2x512mb

ocz 3700eb
ocz gold rev2
crucial ballistics ddr400
ocz plat rev2


thanks!!!

[Lastviking]

Originally posted by AlvoMod
anyone can help me.... i need to buy new memoery for my lanparty.
I i dont know how to choose.

the options are.... only in 2x512mb

ocz 3700eb
ocz gold rev2
crucial ballistics ddr400
ocz plat rev2


thanks!!!

1. Crucial ballistics ddr400
2. Ocz 3700eb

[Massive]

Originally posted by Lastviking
1. Crucial ballistics ddr400
2. Ocz 3700eb

do u know what chips on the memories above?

[3x0]

LANPARTY NFII ULTRA B 2004/1/21 BETA BIOS
ive installed this on my mb, and mech did not boot again. what could be the reason? any one got any ideas?

[Massive]

Originally posted by 3x0
LANPARTY NFII ULTRA B 2004/1/21 BETA BIOS
ive installed this on my mb, and mech did not boot again. what could be the reason? any one got any ideas?

for user with cooling under 0 celcius...better use the 1/31 BIOS...1/21 BIOS turn the hardware sensor protector on in BIOS by default...so sub zero users won't make it with this BIOS...unless before u using sub zero cooling u turn it off the options on the BIOS first...
and with the 1/31 BIOS its already fixed...so 1/31 would be more "subzero" friendly....change the BIOS bro

I hope that would help

[Bad-Religion]

Originally posted by SAE
Yeah. CATs 3.1... those make you loose some frames in nature, but the gains you get in the other tests and the higher graphics clocks make up for it...

I tried 3.2, 3.5, 3.7 and 3.1 were the best.

hey dude i noticed 3.2 its the best after a clean windows install

but i gain like 500pts in 3d01,, but my 3d03 score reduce like 500 pts .. any other driver to 3d03? , im currently at
axp 2800@2.4ghz 230x10.5, 9800p 420\380 , 3dmark01 is like 19.X but 3dmark03 is like 6.3k (lol)

[SAE]

Originally posted by Bad-Religion
hey dude i noticed 3.2 its the best after a clean windows install

but i gain like 500pts in 3d01,, but my 3d03 score reduce like 500 pts .. any other driver to 3d03? , im currently at
axp 2800@2.4ghz 230x10.5, 9800p 420\380 , 3dmark01 is like 19.X but 3dmark03 is like 6.3k (lol)

3.2 is better? What card and what bios (card, brand)?

For 3dm03 there's no better driver than the 4.9beta IMO (DNA 2448 or so using it)

[stealth17]

where are the pics on the very first post?

if you need them hosted i can do that

[zeon]

Originally posted by Hellfire
THE NEW 8KA BIOS!!!

Its been a while since I've released a bios so here goes, many things have been changed in this bios. Also instead of the voltages being set to Auto, I have disabled that to show the real default voltage that the board is booting at. I also set most of the important things for the common overclocker in the bios for you all. The romsip used in this bios is a heavily modified verison of the 1/21 romsip, rebadged to the HF'S MDP RS. Well good luck trying out these bioses.

PLEASE USE THESE BIOSES WITH CAUTION AS I AM NOT RESPONSIBLE FOR DAMAGE CAUSED TO YOUR BOARDS.

Rev1 was used in testing stage by our great bios testers and was further modified for increased performance.

Things included on the 8KA Rev.2 bios are:
- Hellfire's MDP Romsip -- Based off the 1/21 Romsip
- L12 mod built-in
- Cpu Interface Optimised
- Included option to change CPU Warning Tempurature
- Included option to change Shutdown Temperature
- Cured some warm boots problems
- Changed SATA bios from 5.0.39 to 5.1.27 (Modified By Me To Work With Mobo)
- Many Things Set In Bios For Overclockers In Mind
- No more Auto on many Voltage Options, Displays default voltage instead.

Hellfire's 8KA Rev. #2 Bios for Infinity

The mods on the LanParty 8KA Rev.2 bios are:
- Hellfire's MDP Romsip -- Based off the 1/21 Romsip
- L12 mod built-in
- Cpu Interface Optimised
- Included option to change CPU Warning Tempurature
- Included option to change Shutdown Temperature
- Cured some warm boots problems
- Changed SATA bios from 5.0.39 to 5.1.27 (Modified By Me To Work With Mobo)
- Many Things Set In Bios For Overclockers In Mind
- No more Auto on many Voltage Options, Displays default voltage instead.
- Remove Lanparty Boot Logo

Hellfire's 8KA Rev. #2 Bios for LanParty



ENJOY!!!!!!

BTW...
Big Thanks to SAE and Sound98x for testing Rev. 1.

Just to update things here

Btw 245x10.5 now primestable
Good luck on you guys!

PS: Great work Hellfire

[zeon]

not good for Doom3 :? back to Rev #3... added an 80mm on mosfets, running now @ 245x10.5 primestable

[centaur]

yeah, that bios rocks

i think it's time for more bandwith. it's more stable than the 1/21 what i have before.

[e[N]eq]

Hey guys!

I have a slight problem, well several actually.

vcore
I did the vcore mod and I did cut the trace as was posted HOWEVER with the trace cut it wouldnt start at all so I resoldered it and was able to boot but now anytime I go above 1.85V the machine hardlocks, any reason why? I didnt do the vsense or vdrop mods but would they have an impact on this?

vdimm
I have 1 stick of 512Mb Corsair XMS 3500CAS2 memory, im able to boot and run memtest86+ at up to 265fsb (CPC ON) (mem voltmodded and runs at 3.6 btw) however I get corruption, 240 seems good but after some ut2k4 it crashes violently. I also have 2x512 Megs of Mushkin lvl2 black which seems ok up to 260 a well (CPC off) I havent tried with these too much since they are stuck in my server but I will try them as well, the weird thing with these is that they wont do the rated 217 with CPC on even.

My vdd is modded as well and I have tried it up to 2.1V but it didnt seems to improve stuff so I dropped it down to the regular.

vgpu
Got a Radeon 9800XT which I have modded mem and gpu on and its clocked at 485/410 I have gone above the 10% spec limit but I might try more after the comp has stabilized.

Anyway, any suggestion? Especially something on the CPU would be helpful! Btw the machine is waterchilled cpu/nort and gpu (the L30 kit) and I score about 7390 3dm03 with a 1700+ clocked at 2.4Ghz.

[trodas]

Damn, now the pics are gone - hope not for good...?

BTW, Im now about to start the project of resurection of my old Epox 8RDA+, on witch my capacitors died - since I strongly believe that replacing them make the mobo kick again

So, where do LastViking get the capacitors that he show on the pics? I can find in local shops "normal" ones, but they are hardly to 50C rated (and they exploded under 20min of usage, witch my 8RDA+ experienced "live"). And these the 8RDA+ has are rated at 2200mF 10V T31A and 105C - so I think that about 3300mF at 12-16V and 110 - 115C is desirable.
Any ideas?

[Fewture]

Damn, now the pics are gone - hope not for good...?

BTW, Im now about to start the project of resurection of my old Epox 8RDA+, on witch my capacitors died - since I strongly believe that replacing them make the mobo kick again

So, where do LastViking get the capacitors that he show on the pics? I can find in local shops "normal" ones, but they are hardly to 50C rated (and they exploded under 20min of usage, witch my 8RDA+ experienced "live"). And these the 8RDA+ has are rated at 2200mF 10V T31A and 105C - so I think that about 3300mF at 12-16V and 110 - 115C is desirable.
Any ideas?

Take them from a dead board.

[lupacchiotto]

can you give me a link for download the "Morpeus Remix Extreme video driverset"?
thank you guys...

[sEE]

PLEASE HELP!!!

My english is bad.. sorry

I have NFII ULTRA INFINITY and i need up to 2v Vcore

I want modd Vcore, but i dont no how..

In this topic
dont show picture on Vcore modd!

Maybe send me to mail picture and description how to do... laamers@inbox.lv

And what better in BETA BIOS

NFII ULTRA INFINITY 2004/1/21 BETA BIOS
and
NFII ULTRA INFINITY 2004/1/31 BETA BIOS

i have a original DFI BIOS

Thanks!

[SAE]

I hope that contributes to the whole Vcore, OCP and vdroop problematic!

[centaur]

hey, there is another point for the the vdimm mod on the backside!
why nobody told me that

[Electroid]

Testing vcore mods: SP 1M tested 2.256V - 2.304V.

Vcore+Vsense+Vdroop.... modded Infinity.