First 2 pics with half multis.
Before i knew that it use some divider.
The rest is "whole" multis..
Havent played much with 2-2-2 but it got to ~225mhz something.
First 2 pics with half multis.
Before i knew that it use some divider.
The rest is "whole" multis..
Havent played much with 2-2-2 but it got to ~225mhz something.
Everything extra is bad!
At 2T system is very stable but not good in sandra.
Last edited by Ubermann; 09-22-2004 at 01:10 PM.
Everything extra is bad!
310FSB 1:1 X 6 CPC ON
Volt settings:
Cpu 1.550
Cpu spec 113%
Chipset 1.8
AGP 1.6
Dram 3.0
Dram settings:
200 1/01
CPC ON
Cas latency 2.5
Ras to cas 4
Tras 11
Row precharge 3
Refresh period 4708
Write cas Auto
DQS skew Increase
DQS skew 128
Dram level 3
Max Async 10 nano
Doing prime...
Last edited by Ubermann; 09-25-2004 at 10:04 AM.
Everything extra is bad!
Nice work Uber!
Does the RAM get hot to the touch? (3V)
Is 320 stable enough to run some benches like SuperPi 1M and PiFast?
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Ram is cold yet.
Dont think 3.0 really is 3.0.
Cant run any Pi test with 320 CPC on, yet =)
310 was ok in prime for 47 minutes, moving on to 315 now.
Everything extra is bad!
Nice man!
Please post a screenie of the highest you achieved with SuperPi 1m.
320 would be da bomb!
Keep us posted, i can't wait to get mine.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Rebooted computer at least 50 times yesterday.
Can boot win with 315 but never get it prime stable.
Going back to see what max 2.5-3-3 can bring.
Everything extra is bad!
What is the max stable with the timings BigToe recommanded?
Did you try SuperPi 1m?
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
How high did you get with 2.5-3-3 Ubermann?Originally Posted by Ubermann
so Ubermann: what are your max results, with your maximum voltage? (afaik u've the Lanparty-UT - so push it to 3.1V)
but i want to know 1T-results....2T sucks on A64
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
Best i can get in PI is 35 sec, best i can get in sandra i 4900 something when its pretty stable.
Only benches i have tried.
CPU refuse to go past 2.4gig
Everything extra is bad!
Posting Permissions
Reply With Quote
Bookmarks