Ditto, need more than 1.7 for my ballistix to get to 260. 245 on 1.7 2.5.2.2.5 is bloody goodOriginally posted by goddh0r
Anyone tried on Asus K8N-E Deluxe yet?
Ditto, need more than 1.7 for my ballistix to get to 260. 245 on 1.7 2.5.2.2.5 is bloody goodOriginally posted by goddh0r
Anyone tried on Asus K8N-E Deluxe yet?
DFI Ultra-D
X2 3800 Toledo 290x10 (1.39v) (not tweaked yet)
2x 1GB Ballistix
Sapphire X1950 256
Seagate Barracuda 7200.9
OCZPowerstream 520
Custom water cooled
I installed mine over the weekend. As expected works fine on the regular P4C800 Deluxe. You can use slot 2 or 4. I used 4 as its easier to see the LED readout. I did not test the upper limit of adjustment but it will do at least 3.3V fine.
I managed to get 243Mhz 1:1 2.5-3-3-7 stable (12 hours of Prime 95) on my OCZ 3700 Gold Rev 1 at 3.0V. I also managed to lose my SATA RAID array (neccsitating a windows re-install) by fooling around at 250Mhz 1:1 so as usual be careful!
Last edited by Narbo; 08-30-2004 at 07:50 AM.
What?Gascogne: Would also very much like to know how the booster works with MSI K8N Neo2 Platinum.
I would know if someone have tryed the Booster on this mobo, and if it works, nothing more
.
Have anyone tryed them?
Opteron 170 @ 2.2Ghz - Zalman 9700
OCZ Pc3200 2x512Mb VX @ 220Mhz
DFI nF4 SLI-DR ( 3.29 BIOS )
Leadtek 6800GT@415-1120
Seagate Barracuda 2x120Gb Raid0
This is the rule :P
Im getting a booster this week, so I can give it a go on my mb and let you know.Originally posted by Juspriss
What?
I would know if someone have tryed the Booster on this mobo, and if it works
Have anyone tryed them?
Asus P5W DH Deluxe, E6700 @ 3.6Ghz, Super Talent PC6400 4Gb, nVidia 7600GS, Creative X-Fi
@Gascogne: Tnx!
Opteron 170 @ 2.2Ghz - Zalman 9700
OCZ Pc3200 2x512Mb VX @ 220Mhz
DFI nF4 SLI-DR ( 3.29 BIOS )
Leadtek 6800GT@415-1120
Seagate Barracuda 2x120Gb Raid0
This is the rule :P
Ocz booster works nicely with MSI K8N Neo2 Platinum.
Asus P5W DH Deluxe, E6700 @ 3.6Ghz, Super Talent PC6400 4Gb, nVidia 7600GS, Creative X-Fi
you think...i buy that mobo and from a sponsor arrive to me the boosterOriginally posted by Gascogne
Ocz booster works nicely with MSI K8N Neo2 Platinum.
what is the max woltage on the msi k8n neo2 (soket 939) ??
Tnx a lot Gascogne!Ocz booster works nicely with MSI K8N Neo2 Platinum.
Opteron 170 @ 2.2Ghz - Zalman 9700
OCZ Pc3200 2x512Mb VX @ 220Mhz
DFI nF4 SLI-DR ( 3.29 BIOS )
Leadtek 6800GT@415-1120
Seagate Barracuda 2x120Gb Raid0
This is the rule :P
Max in bios is 2.8v and I haven't tried max with the booster yet but Im doing 3.2V now with it and no problems at all.Originally posted by seb87
you think...i buy that mobo and from a sponsor arrive to me the booster
what is the max woltage on the msi k8n neo2 (soket 939) ??
Asus P5W DH Deluxe, E6700 @ 3.6Ghz, Super Talent PC6400 4Gb, nVidia 7600GS, Creative X-Fi
Tested up to 3.4v with the booster and no problem there.Originally posted by seb87
you think...i buy that mobo and from a sponsor arrive to me the booster
what is the max woltage on the msi k8n neo2 (soket 939) ??
Just good to have some fan to blow some air on the booster like it says in the manual.
Asus P5W DH Deluxe, E6700 @ 3.6Ghz, Super Talent PC6400 4Gb, nVidia 7600GS, Creative X-Fi
We reviewed the DDR Booster.
http://www.hardwaredome.nl/reviews/view/11
Have fun with the review
AMD Athlon 64 3000+ @ 10 x 250 HTT | MSI K8N Neo Platinum | Mushkin 512 mb DDR BH5 @ 2-2-2-5 | Club3d ATI Radeon 9700 @ default speeds | 2 x Maxtor 160 GB SATA | 80 GB Western Digital
Enybody got an idee how long it will take to have de booster back from rma,its now about 10day's away.
Asus P5K<*>OCZ 450w<*>E6600@4.0ghz@9x445@1.450v<*>TeamXtreem DDR2-800 cl3 2x1gb<*>Sapphire 3870 512mb DDR4
Asus P5E X48 DeLuxe<*>OCZ 700w<*>E8600 E0@4.6ghz@1.350v wc<*>Corsair Titanium DDR2-800 4x2gb<*>Sapphire 2x3870 2x512mb DDR4 CF
I got the K8NS Pro as well. I'm able to run super pi at 259 fsb 1:1 2-2-2-5 with my BH-5 in slot 3, booster in slot 1. No problem whatsoever. But I can't even bench 3dmark or aquamark past 218 fsb with the booster at any any voltage! Oh well, where's that soldering iron?Originally Posted by mad mikee
Yeah you can put the booster in slot 1 but if you try the mem in any other slot w bios F3, can't set OC settings (hangs, then on reset is back to defaults) Also pot runs into memory if in slot 3 and 1 stick only (no good) in slot 1. Same problems w/ VNF-250 (can't boot w/ booster in slot 1)
So this is a waste of my money, going to VDIMM mod the board, will still be better than nothing which is what I get w/ this.
:grr:
Did anyone find out about this?
cause I just bought this mobo, and a great P4 cpu, so I would like to know i the OCZ booster works on this mobo
|-|DFI LP nF4 Ultra-D passively cooled chipset|-|
|-|Winchester 3500+ cooled DD TDX A64 and passive car radiator|-|
|-|2*512 Corsair PC3500 (BH-5)|-|
|-|HIS X800XL cooled by zalman VF700-cu @ 5v|-|
|-|Powered by Tagan 480w PSU|-|
If you are a Dane --> tjek min hp for flere billeder
Does the Booster work on the DFI Lanparty Nforce3 250Gb socket 754 ?
Yes i just tried it in my asus k8n-e and it works fine... tried all the way up to 3.4v so far.... hyperx is getting to hot at 260mhz 1:1 2,5,2,2, gotta dig out my 120mm delta to cool it off
Win7 64 Ultimate
i7 930 - 4200mhz 24/7 - Dtek v2
ASUS P6X58D-E
2 x MSI 6970's xfire
3 x 2gb G-Skill 2000mhz
Samsung 27" LCD
SilverStone ZM1200w psu
2 x 300gb WD Velociraptors Raid 0, 4TB storage
PS3-used mostly for bluray and media server
Has anyone tried the OCZ DDR Booster with the Asus A8V Deluxe (Rev 2.0)? I know that rev 1.02 is not compatible. Any info on the rev 2.0?
the booster works fine on shuttle an51r
Anyone? I would also like to know...
Intel Core i7-2600K---> Koolance 370
3 X EVGA 480 GTX SC's Watercooled--> Koolance VID-NX480 blocks, HWLabs GTX 480, Liang D5 Vario
Koolance RP-45X2 Reservoir
Corsair Obsidian 800D
Gigabyte GA-Z68X-UD7-B3 MB
SILVERSTONE ST1500 1500W PSU
16G CORSAIR DOMINATOR-GT (4 x 4GB) PC3 12800
2 X Kingston HyperX SH100S3B/120G SATA 3 in RAID 0
1 X WD Caviar Black 1TB
Dell 3007 WFP-HC
Z-5500's
Windows 7 64bit
Here you are yuriWhy has no one tested this on a sk8v ?
its only the best motherboard on the planet
SK8V at 4 volt benchstable OC !
btw: Its AMD WR in Superpi M8
and nr 6. total:
http://www.biwa.ne.jp/~yok/838RANK-NEW.htm
Best OC Regards
Tom Holck
Denmark
The Homeland of nVentiv and Asetek
Works on S754 K8NSNXP with 2 x 256MB & 2 x 512MB XMS3500 as well.
Currently typing with DDR Booster in Dimm 1 & 2 x XMS3500 in slots 2 & 3.
Thight squueze but it manages.
Funny thing is that the K8NNXP & K8NSNXP have the same layout but on OCZ's website, they say that you can only use 1 DDR with the Booster in place.
Could it be that the Corsair XMS modules heatspreaders are slimmer than the "other" heatspreaders??
Can't try with other brands as I don't have anything else but my beloved Corsair XMS BH5's....
Cheers,
Minh
Mine:3770k @ 4.6Ghz @1.25v, Corsair H80, Asus SabreTooth Z77, 4 x 4GB Corsair Vengeance 1600C8, XFX 7870DD, Corsair HX850w, Sandisk 240GB Extreme SSD, Corsair Graphite 600T
Kids: 2500k @ 4.6Ghz @1.368v, TRUE120, 2 x 4Gb Corsair Vengeance 1600C9, Gigabyte Z68X-UD4-B3, Gigabyte HD6870, Sandisk 240GB Extreme SSD, 850w Thermaltake 850w PSU, Antec P182 Case
Kids2: i3 3225, 2 x 4Gb Kingston HyperX 1600C9, ASUS P8Z68-M PRO, Sapphire HD4870 1GB, 128GB Samsung 830 SSD
Server: Core2Quad 9450, 2 x 2Gb Kingston HyperX 1066, 2 x 2Gb Corsair XMS1066, Gigabyte EP45-DS5, Corsair HX650w, OCZ 120GB Vertex 2E SSD, WD 1TB Black, 2TB Seagate 5900rpm, 2TB Seagate 7200rpm
Has anyone tried this on an IT7 MAX2 board? I'm currently debating on whether i should upgrade or not atm. I have an old p4 1.8a running at 2.7 with air plus a few sticks of corsair (cmx256a-3200LL) that are bh5. My problem is i can't attain a high bus due to my x18 multiplyer. What chip can i buy relatively cheap that would get me up in the 200fsb range and how many volts can i push to these bh5 sticks with the DDR Booster? Thanks in advance.
Howdy Gascogne.Tested up to 3.4v with the booster and no problem there.
Just good to have some fan to blow some air on the booster like it says in the manual.
Do you use DC? Since Im curently waiting for my mems, I would like to knom which slots u have the booster in and the mems.
The best choice would be:
Slot 4:Booster
Slot 3:
Slot 2:512\____ DC
Slot 1:512/
Or how do you run it?
just incase anyones wondering.
the OCZ booster works great on the Gigabyte K8NS Pro.
works even better then the actual Vdimm mod.
I been able to hit 3.8 volts on the ram with little to no problem.
with my Vdimm mod, I can't load the OS past about 3.1 volts, but with the DDR Booster it loads just fine, even at 3.8 volts.
I found no problems with it one this board. good solid combination.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
I would like to know this as well. MIght pick up the board soon.
Posting Permissions
Reply With Quote
Bookmarks