SuperPi32m 5GHz & 4GHz Haswell All Out Challenge!

[hiwa]

Hiwa - 5:55:516 - 49x102 - 1360 MHz - 6-10-6-24-64-1 - ASRock Z87 OC Formula - G.Skill 2400C8 PIS / PSC - 2.15v -140
very easy with this cpu better time is possible at same freq
tried about 5 hours
30x 3d01 d to c one time
Wait 31 sec gave me slower first loops but then its faster
i had one run with 33 sec waiting and first loops were very very fast but mem error at loop 15 without reason...
Bad ARM on this run but i just let it finished ARM should be around 585XXX
XEH ic can't bench full pot stable need to keep temp around -140
XEY benched full pot but can't do 1360 with these timings
tRFC 59 possible but not very stable
35/36 4/4 also can be done with this setup if i had better memories.

i can suggest guys has better memories can do 1400 C6 try 35/36 4/4 to see the magic, i can run 5 loops only loop 5= 13.890

Happy New Year to Everyone

[nfszocker]

Nice Time hiwa

[Splave]

:d
////

[bullant]

Very nice Hiwa ^

Finally had a play was just working on waza and few things,no new better time but was a good learning session.This is my freq cpu and doesn't quite seem as good as my low clock cpu I used before that Ive now sold ,so may buy another cpu to test soon

This one passed


This one not quite but I say 55.2--


Something I was working on

[hiwa]

Nice Bullant , the only strange thing to me is u always have different ARM, did u use same time before running PI after CW ?
pretty sure with more work even 54.XXX is possible.

i have a lot of runs can be 55.2 and 3 at 1375 but i am not stable on memories or IMC.

PS and try RTL even if u can at 1360

[bullant]

Yeah think it is because I don't use a ram drive,will have to start using one I think.When using no ram drive wait time is 5.sec

[AVulgarPicture]

AVulgarPicture - 7:20:250 - 100x40 - 1401MHz - 9-12-12-16-106-1 - Gigabyte Z87X-OC - G.Skill F3-26000C10D-8GTXD 2X4Gb/Samsung - 2.2V - CPU Air / RAM Air

[Don_Dan]

Good score, AVulgarPicture, but your screenshot is missing some info, especially regarding subtimings.

[AVulgarPicture]

oh ok, is that a necessity for the thread? i should have it here somewhere.

[Don_Dan]

Yes, please see the first post:

Screenshot Requirements:[/B]

• 5 GHz +/- 3 MHz or 4 GHz +/- 3 MHz
• Use Super Pi Mod v1.5
• AIDA64 cache and memory benchmark - run this after sp32m for obvious reasons.
• CPU-Z: CPU tab + memory tab + motherboard tab
• Memory utilities: Asus MemtweakIt! or Gigabyte TweakLauncher or MSI Control Center, Asrock and Biostar

[Dumo]

How bout new Haswell Z97 4G/5G 32m thread?

[TaPaKaH]

Those CPUs aren't much different to current ones.
Why not keep all in same thread and just highlight new gen, if necessary?

[bullant]

Hi all,its been so quite it here,am looking forward to seeing all the new times coming from everyone

[Splave]

Those CPUs aren't much different to current ones.
Why not keep all in same thread and just highlight new gen, if necessary?

I vote for a fresh one, too many times on this thread already.

[angoholic]

Thinking the same..maybe there is a slight difference, dunno yet..

[l0ud_sil3nc3]

l0ud_sil3nc3 - 5:55:734 - 49x102.1 - 1361 MHz - 7-9-6-18-64-1 - Z97 OCF - GSkill 2200 c9 2x2GB/BBSE - 2.25V - LN2 @ all



Fail 4G but will revisit so please don't add

[Don_Dan]

Looking great, George!

So, do you guys want to start a new thread or keep this one?

[bullant]

I vote for new thread as its a new platform,looks like its more efficient,can always post z87 back into this thread as we keep improving on the old platform

Nice time loud

[l0ud_sil3nc3]

^Thanks guys

[Don_Dan]

Alright, new thread it is: SuperPi32m 5GHz & 4GHz Z97 Haswell ( Refresh ) All Out Challenge!

[TaPaKaH]

TaPaKaH - 5:54.562 - 102.1x49 - 1429MHz - 6-10-6-22 - M6I 0038 - GSkill PSC - 2.20V - LN2/LN2

[bullant]

Very nice Sam,crazy time,crazy memory,well done

Just a little over cap dude but still nice result regardless

[websmile]

TaPaKaH - 5:54.562 - 102.1x49 - 1429MHz - 6-10-6-22 - M6I 0038 - GSkill PSC - 2.20V - LN2/LN2

You failed at screening

Time is killing it and 1429 C6 looks awesome though

[Splave]

can you believe the post on the top of this thread is 9 months ago? So crazy where the time goes

[bullant]

Yeah time has gone fast