***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[sin0822]

they probably changed how much LLC is applied at auto, or even tuned the levels a bit.

BTW if you want your BLCK at 100.00, set 100.2 and it will give you 100.0.

[Kroegs]

Just curious, anyone tossing an ivy in one of these to see how she runs?

[MonkY]

Did anybody tried a 3770K on the P67A-UD7-B3 (bios F7 seems to support Intel 22nm CPU E1 stepping)? Any downsides on still using the "old" UD7-B3? I was thinking about an upgrade... but i will wait till i know it's really running ok

[topdog]

Did anybody tried a 3770K on the P67A-UD7-B3 (bios F7 seems to support Intel 22nm CPU E1 stepping)? Any downsides on still using the "old" UD7-B3? I was thinking about an upgrade... but i will wait till i know it's really running ok

Looks like we'll be stuck with a 39 multi on the P67/Z68 boards with Ivy bridge http://www.legitreviews.com/article/1917/1/

[sin0822]

wait a week or next week and a new BIOS will come out.

[GLENBOY]

Looks like we'll be stuck with a 39 multi on the P67/Z68 boards with Ivy bridge http://www.legitreviews.com/article/1917/1/

thanks for posting , i'm going to give it a few weeks and see how they pan out with the 3770ks and this board , i'll stick with my sandy for now

[Da_maniaC]

I just installed the Z68 version of this board last night. I did all of the driver installations off the CD and the website to the most current versions, but I still have one "unknown USB device" on Port 4/7 in the device manager. Could someone tell me what driver I am missing in order to have everything installed happily, or which one to disable in the BIOS?

I have the exact same issue!
All drivers installed. But Windows 7 keeps telling me there is an unknown device on Port#/Hub# 4/7.
I unhooked all devices from my PC and after a reboot, the 'unknown device' is still present and being detected.

Is there anyone that knows which device/driver this is?


[Edit] 17-08-12 - Problem solved!
http://forum.giga-byte.co.uk/index.p...ic,9502.0.html

[Gestler]

Anybody has newer SPIFlash to cross flash the BIOS (Ver.2.xx)?
Links above,both is dated 26.Feb 2008 (Ver.1.20).
http://hwbot.org/forum/showpost.php?...&postcount=433

Edit:
Sergio,
specially for you:
Modded BIOS UD7-B3(F3h)=>B2:
http://www.fileden.com/files/2009/12...67aud73-B2.zip

Use latest @BIOS,upgrade also Backup BIOS (ALT+F12).
Flash with "Load Optimized Defaults" and clear CMOS.
After,you can flash any B3 BIOS with QFlash.
My CPU-Z:

Hi, thank you in advance stasio for your many posts about bios. I need litle help, because my english is realy bad, im not 100% sure how to flash this modified Bios from B3 revision to my B2 revision UD7. I have F8X bios now, is it necesary to use oficial F8 bios? Can i flash this modified bios in Qflash? or i need MS DOS utility? THX

[stasio]

As stated in my post,
first flash from B2 to B3 must be done with @BIOS (or with FlashSpi in DOS) .
Once you flash to B3 BIOS, next flash can be done with QFlash (you can flash strait to latest F7).

[Gestler]

OK, thanks But one more question, if this new bios is bad for me, and i want go back for my F8x, can i use same way? first time use @BIOS or FlashSpi and flash back F8x ? or i need some special utility or another ... Thanks in advance

[stasio]

Where you found my post,there should be reverse BIOS......B3=>B2 also.

Also posted on TT forum:
B2=>B3
http://91.121.148.119/downloads/BIOS/P67aud73.f3h1

B3=>B2
http://91.121.148.119/downloads/BIOS/p67aud7.f8f1

Same first flashing for both.

[Gestler]

Thank you stasio! it work very well!!!

[stasio]

[GLENBOY]

just started with a weird issue it randomly reboots even from in bios and normally i get about 5 pulses about a second apart then it restarts the pulses light the lights up in the case for a second and the fans twitch , going to strip it all down tonight i have tried a different gpu and tried each ram stick single and its the same