@ Sam, c7 and c8 working fine here with 1.7v and lazy loose timings
You must have some crazy low voltage dimms if they can do c6 with the above timings at 1.6x volts, as I could not run c6 with the above sub timings with even 1.75v.
@ Sam, c7 and c8 working fine here with 1.7v and lazy loose timings
You must have some crazy low voltage dimms if they can do c6 with the above timings at 1.6x volts, as I could not run c6 with the above sub timings with even 1.75v.
Originally Posted by Hondacity
Hi, guys.
I've some stability trouble with Samsung hch9 @ 1400mhz. No problem boot in to the OS, but 32m stops at first loop with 'no exact in round' error messagge.
I reduce the problem at the command rate, becouse when i set 1N start the instability. I see a connect with the RTL, with 2N are in auto at 49-50, with 1n are in auto at 45-46.
Yesterday i tried the ram at -60?c, same results.
MOBO MOCF
BIOS 141A
DRAM V. FROM 2.000V TO 2.200V
SA 0.400
AIO +0.250
DIO +0.300
VCCIN 2.300
Last edited by THERULE; 07-26-2013 at 10:46 AM.
Try running everything at auto for SA, AIO, and DIO with 2.04v on memory for 2800 c9 Samsung.
its friday, i have no night life because im like an old man.... time to bench some sammys! results coming... soonish
Current Status - Testing & Research
Almost ready to give up on this board, but here's a 4x8GB 2800C11 run with 44x uncore.
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
^Nice cpu. Am on my 3rd ugly processor for this board. May have to buy abroad next time.
Why? The board is more than capable to do whatever you want it to clock up, just set it up correctly.
4X8GB is tough on your cpu's imc with any board. Use 125 strap for >2933, up your vdimm and vtt and go easy with uncore unless you go cold on cpu
Last edited by Dumo; 07-27-2013 at 08:33 PM.
Hell yeah!
Map "sharqi" Bf3
1080p ultrasettings
Asrock z87 OC 4770k @4800mhz
G.skill 2666 cl10
2666mhz minne cl 10.12.12
1333mhz minne cl 9.9.9
98,9fps VS 85,3fps
New bios: 1.60 7/30/2013
http://www.asrock.com/mb/Intel/Z87%2...wnload&os=BIOS
1. Update CPU code.
2. Improve overclocking compatibility.
Hell yeah!
Map "sharqi" Bf3
1080p ultrasettings
Asrock z87 OC 4770k @4800mhz
G.skill 2666 cl10
2666mhz minne cl 10.12.12
1333mhz minne cl 9.9.9
98,9fps VS 85,3fps
so memory bandwidth effect gaming performance lots !
[SIGPIC][/SIGPIC]
BIOS 1.60 seems to be better for me in terms of CPU voltage. My CPU is now able to do a complete run on 32M with 1.41v on the vcore. This was impossible on bios 1.50.
Below run is made with a kit from Splave...
ran some retail earlier, not as fun as ES XD
Crazy run Allen!
New Formula drive 2.0.11. support profile hotkey real-time change
http://picx.xfastest.com/nickshih/as...p(v2.0.11).rar
[SIGPIC][/SIGPIC]
Hi guys,so I bought the OCF last week and fired it up yesterday and started trying to put something together,still have a lot to work out with bios settings,platform and timings but board and bios was nice to work with
PSC 1.93v Memory on air
^dat PSC!
Hi guys,so I bought the OCF last week and fired it up yesterday and started trying to put something together,still have a lot to work out with bios settings,platform and timings but board and bios was nice to work with
PSC 1.93v Memory on air
welcome
[SIGPIC][/SIGPIC]
Thank you nickwelcome
Bulland, you've always got nice psc.Looking forward to the scores!
Thanks man^^
Had a quick play tonight,first time with the board sub 0 and was really liking it,never tried any 4-5 Ghz was just testing my new chip.
This was passing a few loops of 32m but still trying to work out everything
THIS IS SO TRUE !!! i always tell ppl this and never believe me mem bandwith DOES MATTER !!!Hell yeah!
Map "sharqi" Bf3
1080p ultrasettings
Asrock z87 OC 4770k @4800mhz
G.skill 2666 cl10
2666mhz minne cl 10.12.12
1333mhz minne cl 9.9.9
98,9fps VS 85,3fps
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Getting stuck on PCH Detection and/or USB HotPlug. Is this the CPU holding back or something else? TIA...
Edit: testing my 4th 4770k. still no luck in finding a decent one.
Hey guys,just wondering is 2.3v vccin max volts available in Formula drive lite version (OCF),or does it allow you higher in bios
Thanks Bull
Never mind I found it I had Extreme volts disabled
Last edited by bullant; 08-03-2013 at 09:41 PM.
to many buttons to press buddy ???
Slowly working them outto many buttons to press buddy ???
Posting Permissions
Reply With Quote
Bookmarks