SuperPi32m 5GHz & 4GHz Haswell All Out Challenge!

[youngpro]

Are the 2500C8 Tridents the demonstrator kit from Computex kit from a couple of years ago or you actually managed to find them in retail?

yeah its basically the same

hey Sam i was thinking about what you said in the past about the hand picked stuff is nothing like retail and unmatchable, i have some thoughts on that,

in the past i agree with you, but on this platform things arnt the same for me, my 2 best sticks that i previously did 2800 7-11-7 with are no longer my best sticks, in fact they are just some retail kit i didn't even realize was PSC and just ripped out of a litecoin mining rig,

i tested a bunch of PSC this weekend, some mine, some owned by a bunch of different Australian guys, all the retail stuff that used to be 'average' on Z77 is now clocking the best on air, i haven't tried LN2 on many kits yet, but the sticks that i used to consider my gems are now getting beaten by a 2000c7 flare kit that i didn't give much respect to in the past

flare couldnt run 2600 on air in z77, now doing 2666 8-12-8-27 1T, trfc 82, twcl 6, same secondaries/tertiarys i want to use on LN2 minus trfc @ 1.91v

[coolice]

we have awesome cards this generation,too bad intel screwed up the retail haswell big time....

Have faith Alex-Ro :P When those Costa Ricas hit the market... Well at least that's my hope!

ur hope is here
retail 4770k 7GHz 2.176v

[Splave]

how many it take TL

[coolice]

how many it take TL

only 21...off this batch

http://forum.hwbot.org/showthread.php?t=78887

sorry for being OT

[Don_Dan]

Also on XS.

[Alex-Ro]

Alex-ro - 7:21:540 - 40x100 - 1300 MHz - 8-12-8-28-84-1 - Asus Maximus 6 Extreme - GSkill 2200mhz Pi 4x2GB/PSC - 1.9v - Air CPU/Mem

PSC on air have not so great efficiency for me at least,going to check the best set of these two(which can do cas 7 twcl 7 2600 on air 32M ) on dice.

[websmile]

@youngpro very interesting, is this related to the haswell imc or do you think it is issue of the board you tested on? I skip Haswell, at least until now, so I cannot test my psc, one of these is in fact also Flare kit that already does 2600 8-11-8-28 on Z77

[Alex-Ro]

I've yet to see any huge difference between ivy and haswell at clocking memory(psc,sams,bbse) except they work little better on haswell.I've binned a dozen of psc kits on haswell and ivy,correlations are the same,better kits on ivy work better on haswell(m5e + m6e both cases used).

[youngpro]

i dont think its IMC related, i swapped in and out chips and i didnt see the mhz go up or down, i think in the 2600-2700 range IMCs are very similar for PSC/BBSE, but i only tested limited samples

[ZenEffect]

I lol'd a little when this finished



Hope Jake sees this.

all air everything

7:20.922 - 2400 C7 - Hypers

if you are having issues with cpu-z reading wrong voltage open the cpuz.ini and try Sensor=0

[dinos22]

hey guys,

james and I did a lot of testing on the weekend with PSCs and ran into some problems with cold and could not tighten to 7-10-7 or 6-10-6

it was bios related! I confirmed it in testing last night and today and we're making a new benching bios that will sort this out. My PSCs arent too great so i couldnt really do a great deal more than 1300 cas6 and 1333 cas7 but a few guys do have some gems which should be cranking it pretty hard now. will update it when it's ready

Dino

[ZenEffect]

ZenEffect - 7:20:703- 40x100 - 1200.7 - 7-8-8-20-62-1 - ASRock Z87 OC Formula - Corsair GTX2 2200mhz 2x2GB/Hyper MGH-E - 1.9v - Air CPU/Mem



tuned the OS a little... maybe I gain a little on BBSE

nobody else wants to join the hyper fun?

[Splave]

None of mine run 8 8 8 2400 been working on some interesting stuff. Looking pretty fast @ 2600 c8 will post soon

[ZenEffect]

looking forward to 2600 c8

[Calathea]

ZenEffect - 7:20:703- 40x100 - 1200.7 - 7-8-8-20-62-1 - ASRock Z87 OC Formula - Corsair GTX2 2200mhz 2x2GB/Hyper MGH-E - 1.9v - Air CPU/Mem

tuned the OS a little... maybe I gain a little on BBSE

nobody else wants to join the hyper fun?

Wow cool! I will try my kits, 4x2 dom gt 1600 cl6. At least one of them could run 2133 7-7-6 on SB @ 1.80 vdimm but it was slooow for the clocks back then.

edit: So I tried hypers too. My kits can't make much more than ~2250 MHz at any timings. Quick Pifast comparison between my fully tweaked BBSE @ 1300 8-11-7 1.85 vdimm and "just getting started" Hyper MGH-E at 1098 7-7-6-24 1.92 vdimm:

BBSE
http://hwbot.org/submission/2393293_...770k_11.69_sec

Hyper
http://hwbot.org/submission/2395832_...770k_11.69_sec

Pretty neat huh?

Max pifast = 1130 MHz 7-7-6-23 1T trfc 68 with 1.96 vdimm. For 32m I will need cold on them.

[Splave]

still working, not bad at 2600

[Don_Dan]

So glad to see some Hypers again!

[ZenEffect]

still working, not bad at 2600

not bad at all... have you played with your waza sizes? i went against convention last night and found another .2

[Splave]

Not yer. Time cut was strictly voltages

[TaPaKaH]

@ZenEffect: do same settings pass 32M at 5GHz?

[ZenEffect]

@ZenEffect: do same settings pass 32M at 5GHz?

don't have an air 5ghz chip to be honest. I can maybe next weekend when I start freezing things.

*edit*

or maybe tonight, checked tracking and my ek plates are supposed to be in today so I might play with a little dice, ln2 next weekend

@Splave

sa, ioa and iod? I noticed if they aren't set "right" things start slowing down. the auto rules are pretty good though.

[youngpro]

ill have some 4ghz times soon, maybe i wont challenge andre but should have some alright times

been playing with a couple boards and just getting some time to properly pay on z87/memory, pre-computex was a little too full on

[C-N]

Been through several bios's, all my timings both good & bad & spent 1/2 a day yesterday playing with voltages & ended up with exactly the same score as my previous 2 attempts. After seeing Alex's great run I was hell bent on not posting until I could at least break the sub 6 min mark but I just cant make it so this will have to do as my best.

C-N- 6:00:063 - 50x100 - 1400MHz 10-12-12-18-120-1 - Gigabyte GA-Z87X-UD5H - Corsair 2666 C10 2x4GB/Samsung HCH9 - 1.90v - CPU Water Kuhler 920 / Ram Air



This weekends attempt

[Alex-Ro]

Nice result man,if you lower trfc and some tertiary a little you'll reach your goal easily

[C-N]

Nice result man,if you lower trfc and some tertiary a little you'll reach your goal easily

There's got to be something I'm not getting but that really is the best I can do. Might be me, my chip the board who knows but its real tough with my Samsung's on the 2800 divider. I have a hard time adjusting secondary's. Lower trfc is slower for me & although I have run trrd 4 & trtp 4 it don't like it so I ended up setting 3 which must put the board into panic so it sets the lowest its happy with to boot. I been right through my timings & just cant get my samsungs to play nice on the 2800 divider.