Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
This isn't working for me with my GTX 580, whenever I add:
I get a notice about a syntax error, clicking on it takes me here http://boinc.berkeley.edu/wiki/Anonymous_platformCode:<app_config> <app> <name>hcc1</name> <max_concurrent>4</max_concurrent> <gpu_versions> <gpu_usage>.25</gpu_usage> <cpu_usage>1</cpu_usage> </gpu_versions> </app> </app_config>
The project then forgets all work units in progress and won't fetch new work, even though the event log doesn't show errors.
Anyone?
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
I have my NVIDIA GPUs set to 0.5C + 0.5NV. Works for me.
The link referred to the app_info.xml file. That is not where you want to go.
Last edited by Gandalf; 03-30-2013 at 10:47 AM.
"I refuse to answer that question on the grounds that I don't know the answer" [Douglas Adams (11 March 1952 - 11 May 2001)]
MM - if you are running BOINC on more than one computer, you might want to download/install/run BoincTasks. I use it to keep a watch on all my computers - http://www.efmer.eu/boinc/boinc_tasks/
"I refuse to answer that question on the grounds that I don't know the answer" [Douglas Adams (11 March 1952 - 11 May 2001)]
Last edited by OldChap; 03-30-2013 at 11:31 AM.
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
My log is currently clear as I had to reset WCG to get it crunching again and I don't want to break it again tonight for fear of not getting more work units, but I've never seen app_config and I had to make app_info (it wasn't there). BOINC version 7.0.59.
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Mismatch in boinc version and use of app_config/app_info
can't remember the exact version number but I think it was boinc 7.0.42 and later require app config or at least prior to that it doesn't work.
app_config files replace app_info which must be deleted
My Biggest Fear Is When I die, My Wife Sells All My Stuff For What I Told Her I Paid For It.79 SB threads and 32 IB Threads across 4 rigs 111 threads Crunching!!
Ah, thank you. Does the content of the file stay the same?
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
I took a chance, it's now running four WUs
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Update:
I uninstalled 7.0.59, installed 7.0.58, same issue
Then I tried Driver sweeper, removed all the NVidia hidden files and reg entries, booted, did a fresh install of 7.0.58 and sam thing and this in the log:
3/31/2013 1:40:22 AM | World Community Grid | Starting task X0930126750857201105260942_1 using hcc1 version 705 (ati_hcc1) in slot 8
3/31/2013 1:40:23 AM | World Community Grid | Computation for task X0930126750857201105260942_1 finished
3/31/2013 1:40:23 AM | World Community Grid | Output file X0930126750857201105260942_1_0 for task X0930126750857201105260942_1 absent
They are starting and going to computational error in the same second..
Well I've been wanting to replace this board with a Intel Z77 board I have and I guess this is the motivation to do so..
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
MM, Can you confirm that you followed these steps to use Drive Sweeper..
1- Un-install AMD CAT 13.1 and delete C:\AMD\Support\13-1_vista_win7_win8_64_dd_ccc_whql
2- re-boot in safe mode
3- Use drive sweeper to remove Nvidia and ATI/AMD display drivers
4- Do normal OS re-boot & re-install AMD CAT 13.1
5- Re-start system
6- re-start BOINC
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
I had an issue when I messed with drivers. The WUs would immediately error out upon starting. I cleared them(drivers) out and reinstalled everything and the problem was fixed. But if you don't buy that, it's a good enough excuse to get a new board! Will this board be hypothetical like the other one?
No. it's for the 2600K..
Intel DZ77RE-75K
It's actually a board I sold to a guy here, someone stepped on the box in shipping and he sent it back to me and I replaced it..
One of the dimm locks is broken off but I think it's usable..Not sellable but usable and a big step up from that first gen Intel board that the 2600K is in now.
This is the board:
http://www.newegg.com/Product/Produc...82E16813121639
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
I think I'm missing something else now, since doing the app_config file the only threads using the CPU are GFX threads. My CPUs are sitting at 16 % usage and all CPU tasks are Waiting to run :/
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
@OJ -
max_concurrent is the total you want for both CPU and GPU
So I want it like this?
Code:<app_config> <app> <name>hcc1</name> <max_concurrent>26</max_concurrent> <gpu_versions> <gpu_usage>.25</gpu_usage> <cpu_usage>0.5</cpu_usage> </gpu_versions> </app> </app_config>
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
CPU usage now sitting at 100 % with 22 CPU tasks and four GPU tasks in progress, many thanks!
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Bookmarks