SuperPi32m 5Ghz Ivy All Out Challenge!

[natu]

some first test Trident 1600CL6 BBSE @ 1.94V

cold air,ram HS temp 3.3C Grad

[bullant]

Nice time natu, have you had a chance to run 5Ghz @ those timings,in Australia we need cold cause our ambient temp is about 30c

some first test Trident 1600CL6 BBSE @ 1.94V

cold air,ram HS temp 3.3C Grad

[natu]

i can run this settings on 5Ghz but with CW came not exact in round,too much for the imc or whatever

[T0lsty]

T0lsty - 6:17:203 - 50 x 100 - 1333mhz - 7-10-7-28 1T - Asus M5E - 2x2 G.Skill F3-1920CL9-4GBPIS PSC - 2.05V ; CPU -water /RAM LN2 -120.

[l0ud_sil3nc3]

Messing with waza file sizes. . . 1.89GB D > C C>D

first no waza


waza


I don't know why the Asus MVF needs so much voltage to run compared to the OC Formula.

The above took 1.765v and 2600 8-12-8-28 with the same subs was not exact in round immediately, even though the same dimms can run 2600 c8 on the Asrock with TWCL at 7.

vccio 1.1
vccsa 0.96875
LB 5

just confusing to say the least.

[websmile]

This is nothing new that the OC Formula owns all Asus Boards on Vdimm, several kits I sold needed up to 0,1V less on OCF than on my Gene... In spite of MC being in cpu, the board is still a major factor, which some people tend to deny

[owikh84]

Not only vdimm, OCF also takes 0.06v less vCore than MVE & MVF

[crustytheclown]

MM or bios?

[Alex-Ro]

Vcore is true,however regarding vdimm,asrock ocformula overvolts by 0.025-0.027 on DMM,which is A LOT.I had an Oc formula,samsungs 2666C10 could not boot 2700 9-12-12 whenever on gene 2800 9-12-12 was 32M stable with 1.9V,don't know what to say about psc or bbse,overall i consider asus rog z77 boards to be the most memory-friendly....

[websmile]

On PSC, I have two reliable feedback including MM measuring, my gene undervolts with tool reading against bios by ~0,02, with mm ~0,03, Formula seems to overvolt, Alex is third one who confirms this, against Bios and tool reading ~0,03v, real differences I had were around 0,05v which GeneV needed more real voltage on the two psc kits than on OC Formula. As ususal, this can vary from board to board, but this is info I have so far.

[Splave]

hmmm, Mine reads exactly what I set. Strange

[websmile]

I think loud_silence has mm and can measure vdimm, after that hopefully at least his question will be solved

[l0ud_sil3nc3]

^ I don't mean it needs more voltage, I mean I can not run 2600 c8 on the MVF while the Asrock Z77 OC Formula can.

Not even a single iteration passes on the Asus, yet Asrock with less volts passes with ease, not to mention you can pull in TWCL much tighter.

these screens are from Billy





My Flares and 2400 c8 fail 32M as well at 2600+ so it is not the dimms as all three kits can run 2600+ on other vendors boards, it must be some setting / timing which I am overlooking.

Vcore is true,however regarding vdimm,asrock ocformula overvolts by 0.025-0.027 on DMM,which is A LOT.I had an Oc formula,samsungs 2666C10 could not boot 2700 9-12-12 whenever on gene 2800 9-12-12 was 32M stable with 1.9V,don't know what to say about psc or bbse,overall i consider asus rog z77 boards to be the most memory-friendly....

And this could be the difference as I have not tested a bunch of high mhz memory, but the few kits I have tested all seemed to go very high on ROG boards and clock well, while the Asrock seems to do better with PSC/BBSE for me at least.

Thanks for all the replies guys

[Dumo]

@l0ud..Try up vccsa to 1.25 also play with Dram CP, TX/RX slews and MCH ds

[Alex-Ro]

Finally had some time to play.3570K + good old sammsungs.

Alex-Ro - 6:19:172 - 50 x 100 - 1400mhz - 9-12-12-23 1T - Asus M5G - 2x4 Corsair Platinum 2666C10 Samsung - 1.9V ; CPU -air /RAM air@23 ambient.

[C-N]

Well done with the 3570K mate

[Alex-Ro]

Thanks,took your advice and scored with 2400 wazza,altough i still miss 0.4s from your score,your run with 3570K was awesome...

[Alex-Ro]

FINALLY i hit a home run and managed to beat my previous scores with little 3570K

Alex-Ro - 6:18:860 - 50 x 100 - 1400mhz - 9-12-12-23 1T - Asus M5G - 2x4 Corsair Platinum 2666C10 Samsung - 1.9V ; CPU -air /RAM air@23 ambient.

Hope someone updates the first page

[C-N]

He he......

3570K racing...........

C-N - 6:18:859 - 50x100 - 1400MHz - 9-12-12-20-110-1 - Gigabyte UD5H - Corsair Platinum 2666 CL10 2x4GB - 1.88v - Stock Air

[Don_Dan]

Hope someone updates the first page

Yes, I'll do it, just got an exam tomorrow and one on Thursday.

Nice run though!

[Alex-Ro]

Alex-Ro - 6:18:766 - 50 x 100 - 1400mhz - 9-12-12-23 1T - Asus M5G - 2x4 Corsair Platinum 2666C10 Samsung - 1.92V ; CPU -air /RAM air@15 ambient.

I've nailed it Opening the window could make that trwdr=4,unfortunately i can't run it's brother trwsr 4 only at 5 degrees ambient,but....
It's interesting to see we have different approaches,my run starts faster and i have a better final loop,your starts slower but you have very fast middle loops.

[C-N]

Awesome mate

looks to me like I better get some beers on the way home from work & have another go.....

[Dumo]

Awesome runs Alex and C-N

Go 4X4 and .17s

[C-N]

Dumo this is the first gen v1.0 UD5H with the gap between the RAM slots & blue caps it wont even boot 2800 with 4 dims. The UD5H with no gap between the RAM slots v1.0 & 1.1 & the purple caps which I also have will boot 2800 4 x 4 but I cant get it stable or fast.

2 beers down

C-N - 6:18:750 - 50x100 - 1400MHz - 9-12-12-20-110-1 - Gigabyte UD5H - Corsair Platinum 2666 CL10 2x4GB - 1.90v - Stock Air

[Alex-Ro]

Awesome run C-N,will try following days,seems C-N tactics with beer is becoming a trademark