This is the thread where you post pics/stats/use of your server!
Not an enthusiast one but here is our little but cute server. Runs ms server 2012.
When i'm being paid i always do my job through.
This is a little beast I built awhile ago for a HFT client.
Hardware was 3 servers sporting 3960x's overclocked to 4.8ghz water cooled.
I went and installed this beast at Equinix NY4. Last time I talked with the client he said I keep loading it but it doesn't slow down LOL
The server rack cabinet is mine and stayed here, I just need to fill it back up again.
Yes it is big, but fits right in my work area very well.
I should load it up with a huge water cooling systems and put my main rig inside LOL
Upgrading mine soon, will do some pics for this thread
Found one of my OLD build, not the current one
Specs on that one:
E350 by MSI
4GB Corsair Vengeance
Dell PERC 6/i modded with AC GPU cooler, 92mm fan on huge alu block...
picopsu 125W VI
3x F4EG 2TB
Corsair Nova 128GB
Current:
i3-3225 @ 3.5ghz low vcore
Antec H620
Lian Li chassie
GA-Z77MX-D3H
8GB GeIL Enhance
Dell PERC 6/i
Cheiftec 350W 80+ Bronze
4x F4EG 2TB
Corsair Nova 128GB
Next upgrade (waiting for one more part, this part being a cable...)
i3-3225 @ 3.5ghz low vcore
Antec H620
Lian Li chassie
GA-Z77MX-D3H
16GB Kingston confused ram..... Blu RED edition
Dell PERC H700 modded with ThermalRight HR-05 SLI chipset cooler (and 2x 80mm AC 80MM fans ~5v)
Antec Earthwatts 80+ plat
4x F4EG 2TB
Corsair Nova 128GB
Next step for the server; 6*4TB RAID5 + 2x500GB 2.5" RAID1
Power consumption is ~82W at the moment, expected to fall once going H700 + 80 plat, aiming for 70W
Last edited by M.Beier; 02-14-2013 at 07:32 PM.
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
I think this makes me the central distribution hub for World Community Grid in South Africa
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
2x Xeon E5645 at 3.24 GHz (180 MHz x 18, 185 MHz and above gives a weird slow-down issue)
2x Thermaltake Frio CPU Coolers
1x EVGA Classified SR-2
12x 4 GB (48 GB total) Patriot G2 Series DDR3-1600 (picture shows 16 GB, was taken before my previous payday )
1x Intel 320 Series 120 GB SSD
2x Seagate 500 GB Hard Drive (ST500DM002)
1x Samsung 1.5 TB Hard Drive (HD154UI)
1x Seagate 2 TB Hard Drive (ST2000DL003)
1x Seagate 3 TB Hard Drive (ST3000DM001)
2x Gigabyte GeForce GTX 580 SuperOverclock (picture shows 1x Gigabyte, 1x Asus)
1x Corsair HX1050 Gold PSU
1x Corsair Obsidian 800D Case
0x Optical Drive (digital downloads FTW)
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Using this right now but next Thursday some new goodies coming...
http://www.xtremesystems.org/forums/...ket-2011-Beast!
The above system has been a gem, solid and not one complaint.
100% load since April and even walked in one day when the house was 93F and cpu's at 81C and not a hiccup..
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Last autumn, I built 3 servers for a study project. People might be interested in the hw configs.
Server number 1 (single socket):
Before building the faster server, this one served as a kind of testbed. The goal was to configure it for good I/O performance.
i7-3930K, 64GB, 32 x SSDs via 4 LSI controllers, Mellanox 40 Gbit/sec network adapter
Fast I/O needs parallelism, like cpu bound programs need multicore cpus (or gpu's, if the application fits to this hw approach)
Before settling on the Samsung SSDs, I tested approx. 12 different SSDs for my workload. A few of those can be seen here.
one of the major benefits of the 4 memory channels of the LGA-2011 socket. They allow decent read performance beyond any LGA-1155 cpu.
16.7 GB/sec
Combined workloads with a simultaneous load on the cpu and io subsystem proofed the value of watercooling. The stock and be quiet air coolers limited overall performance. Using a watercooler increased overall performance by 30% on the non-overclocked cpu.
1.3 mio iops with 20 ssd. cpu is limiting the io subsystem here.
For flexibility and to facilitate many reconfigurations, i used long sata cables. Optically not nice, but useful.
This picture was taken when the stock vent was still on. wprime and super pi aren't taxing the CPU as heavily as for instance ycrunch, so the benefit of watercooling might not be as big.
This server was used for the record runs in ycrunch on calculating pi for 25, 50 and 100 billion digits in the category "single socket systems"
http://www.xtremesystems.org/forums/...=1#post5153478
The other 2 servers had different design goals. One was build for peak io performance on 2 sockets, utilizing 2 x E5-2687W, 256 GB and 48 ssd's. The goal with the third server was to get 72 terabyte capacity under 150 watt on the plug outlet using one E3-1245v2
cheers,
Andy
Last edited by Andreas; 02-17-2013 at 03:58 AM.
Andy,
Omfg.
This section was made for you lol.
-PB
-Project Sakura-
Intel i7 860 @ 4.0Ghz, Asus Maximus III Formula, 8GB G-Skill Ripjaws X F3 (@ 1600Mhz), 2x GTX 295 Quad SLI
2x 120GB OCZ Vertex 2 RAID 0, OCZ ZX 1000W, NZXT Phantom (Pink), Dell SX2210T Touch Screen, Windows 8.1 Pro
Koolance RP-401X2 1.1 (w/ Swiftech MCP35X), XSPC EX420, XSPC X-Flow 240, DT Sniper, EK-FC 295s (w/ RAM Blocks), Enzotech M3F Mosfet+NB/SB
WoW, super sweet setup !
holy cow, I think those controllers and SSDs together cost more than my student income for a couple of years
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
Andreas: I would say OMG! but that is too mild! LOLOL
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
:-)
Last year, I saw your Romley system. Soon after Intel released the E5-2687W CPUs ...
I did see many systems over the years, but from a total system perspective, this platform really shines.
Especially I/O is at an astonishing level. 6 x LSI controllers make shure data can pass from the ssd's via the pci express 3.0 lanes to memory without too much speed brakes.
During the haydays of the project, quite a few SATA cables left the box.
rgds,
Andy
OMG Andreas.. I don't know what to say.. Only that I love your servers..
Oj101, NapalmV, Movieman... I see so many Masters here, this new forum is so exciting
All the XS wisdom now in server flavor too. Great!
Some awesome stuff in this thread, even my machines that could be considered impressive are put down.
That said below are some stuff I got to do last year!
We start off with several retail SSD's and Intel CPUs.
These are a combo of Samsung 830's, Xeon E5's and Xeon E3's.
The best machine that I built was a high density 1U server. With an LSI-9266-4i, Samsung 830 256GB, and 2x1TB Seagate SAS. 128GB of ECC-REG 1600 ram, and Dual E5-2670's
Here's another machine that I've setup with RAID-10 Crucial M4 512GB SSD's on a LSI2208 based ROC.
Dual E5-2660 and "only" 64GB of ram.
The picture of the rack in LA.
Excuse the crappy cabling job. Had a few machines provisioned as we were on a deadline, thus we weren't able to remove the cables to a few machines without disrupting service so we tried our best to manage it, and I think for my first time in a DC + rack, I did an okay job.
Project Elegant Dreams
CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
Sound:Asus Xonar Xense w/Sennheiser PC350
SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,
Water Cooling
Main Loop
EK Supreme HF
EK GTX480 blocks on EVGA 580s
MCP355 and MCP35X in serial
Dual BlackIce GTX480 Rads
Very nice Cook !
Your down in Irvine I see. I have a client down there... TGS, they are running 40,000+ cores last time I was in there.
Looks at my rack here... man I need to fill this puppy up with stuff like this
Bookmarks