Holy thread resurrection

I am still waiting for the new memory to arrive to get cracking with LN2, so real update on the OC part of the story. In the meantime, I have done lot's of gaming with the setup running perfectly stable at 4.8GHz on 1.4V. The temperature readings from page 2 were a little off as it seems. The 17C room temp are in fact 23C, subzero temps are off too, but not by that much I guess, didnt recheck.

Zeus, voltage readings on my setup are pretty accurate, also under load. I am using 130% Overcurrent and Loadline Calibration Extreme, idle 1.392V are measured 1.397V and under load the 1.404V CPU-Z displays are 1.4V measured with 2 different multimeters just to be sure. I used the marked readout points on the board next to the 24pin plug. No idea how accurate those are, I will mearue the VRM area diretcly to see if there is any difference, but so far, no sign of the board wanting to melt down my components ^^