Figuring out G.Skill's SNs

[BeepBeep2]

Thuban or Deneb? If it's the latter it might limit you too much... Please test if you can do 800MHz 7-8-7 on Trinity.

Deneb, so about 1800-1866 MHz will be it.
I can't do 800 MHz 7-8-7 on Trinity, tried up to 1.7v. I think tRP is the limiting factor because 8-8-7 needs almost 0.05v more than 8-8-8. It seems like this board just sucks.

EDIT:
Seems tRFC needs to be set to 160 at 1600, XMP profile shows 130 but not on AMD , 110 fails Memtest86+ pretty quick.

[Tomasis]

Hi,

Id like to know memory IC on my TridentX 2400 C10D 8gtx.

it is single sided, S/N 1236150xxx

Is there a page to check out Gskill mem IC?

[BeepBeep2]

Hi,

Id like to know memory IC on my TridentX 2400 C10D 8gtx.

it is single sided, S/N 1236150xxx

Is there a page to check out Gskill mem IC?

Samsung, they should work fine in your board.

[Reefa_Madness]

Hi,

Id like to know memory IC on my TridentX 2400 C10D 8gtx.

it is single sided, S/N 1236150xxx

Is there a page to check out Gskill mem IC?

Did you, by chance, look at the first page of this thread?

[Don_Dan]

Deneb, so about 1800-1866 MHz will be it.
I can't do 800 MHz 7-8-7 on Trinity, tried up to 1.7v. I think tRP is the limiting factor because 8-8-7 needs almost 0.05v more than 8-8-8. It seems like this board just sucks.

EDIT:
Seems tRFC needs to be set to 160 at 1600, XMP profile shows 130 but not on AMD , 110 fails Memtest86+ pretty quick.

Alright, thanks for the info!

Hi,

Id like to know memory IC on my TridentX 2400 C10D 8gtx.

it is single sided, S/N 1236150xxx

Is there a page to check out Gskill mem IC?

You forgot a "0", but your kit is Samsung ICs ( K4B4G0846B-xxx ). On some AM3 boards they refuse to boot up ( only 990FX from what I've seen ).

[Tomasis]

You forgot a "0", but your kit is Samsung ICs ( K4B4G0846B-xxx ). On some AM3 boards they refuse to boot up ( only 990FX from what I've seen ).

yes, what im experiencing just now (gigabyte ud3 1.0 990Fx)

Gigabyte support told me that same modules as mine , booted up on the same mobo there. Ways to figure out is to check my mem at a shop and to get know S/N that worked for Gigabyte technician in order to clear out the mystery

[Don_Dan]

yes, what im experiencing just now (gigabyte ud3 1.0 990Fx)

Gigabyte support told me that same modules as mine , booted up on the same mobo there. Ways to figure out is to check my mem at a shop and to get know S/N that worked for Gigabyte technician in order to clear out the mystery

Ask them if their sticks are double sided and which revision they have in the labs, the first batches of the 2400C10s were double-sided, most likely Hynix CFR.

[stunned_guy]

Hi,

Id like to know memory IC on my TridentX 2400 C10D 8gtx.

it is single sided, S/N 1236150xxx

Is there a page to check out Gskill mem IC?

Look at here: http://www.hardwareluxx.de/community...-924433.html#d

I had that same sticks single sided with 1219AB40xxxxxxx and nice to see that with other numbers from G.Skill they are still single sided.