Gskill TridentX F3-2800C11Q-16GTXD

[Dumo]

Some of my samsung won't jump 2900 unless jolted with 1.9V+, vccsa 2.5V and vttddr 0.85V

[Zeus]

VCCSA 2.5V? I s sure hope that was a typo Dumo? If not, how many beers for that? But only 0.85V Vtt? Vtt=VCCIO right?

[Dumo]

vttddr not vtt

[Viss]

Got the F3-2600C10 kit here. 32M @ 2800C10 on M5G with 1.75 vdimm:

[Zeus]

Very nice Bart but did you really need 1.25V VCCSA? Mine couldn't do that, not even at 1.83V but i didn't try that much VCCSA though, maybe i should have? I can finish 32M at 1400 11-13-13 at 1.71Vdimm though.

[Viss]

Left it @ auto buddy, sets it way too high. Rerunning now with vccsa & io set to 1.1v

edit:

[Zeus]

Nice, thanks for showing. Maybe i should try again with just 1.75V.

edit: Bart, my friend, you're a genious!



Sometimes things are so simple that they just get overlooked. 1.75V in bios did the trick. This is in Windows 7 64 bit which is usually a bit harder to get stable than 32 bit OS.

Thanks for showing me the ropes Bart!

[kintaro]

It is first run with 1.7V on M5G. i wish for some desent timings 32m.

[andressergio]

Got the F3-2600C10 kit here. 32M @ 2800C10 on M5G with 1.75 vdimm:

very nice Viss !!!

[andressergio]

This is in Windows 7 64 bit which is usually a bit harder to get stable than 32 bit OS.

i agree with that Zeus

[kintaro]

promising 32m result.

[andressergio]

promising 32m result.

great result mate !!!

volts on mem ?

[kintaro]

great result mate !!!

volts on mem ?

Thanks mate.
this is with 1.87v.

[Zeus]

Promising indeed! Surprised to see you're using bios 1204. Very nice run!

[andressergio]

Thanks mate.
this is with 1.87v.

wow i would be very scared to pump that on my gskills

[kintaro]

wow i would be very scared to pump that on my gskills

on air it is reasonable to be scared.
below 0 is the solution in terms of ''safe'' and not 24/7.

[Shiranui Gen-An]

Hmm, so it IS possible to coax 9-11-10 out of CFR at higher clocks, you just have to gorge them with massive voltage lol

[Dumo]

1.85V+ @ 2900+ for some cfr kits

[Shiranui Gen-An]

Well 1.85v isnt enough to convince my RipjawsZ 2133C9 kit to do 9-11-10 at 1200 mhz lol

[andressergio]

Well 1.85v isnt enough to convince my RipjawsZ 2133C9 kit to do 9-11-10 at 1200 mhz lol

hahaa

[kintaro]

8-11-9-16-1T @ 2728 on cold is so nice!!!

[IMG][/IMG]

[Zeus]

Wait a minute, you're pulling this of with these Trident-X sticks?

[kintaro]

Wait a minute, you're pulling this of with these Trident-X sticks?

i was testing mems on ln2 to find out max.
second and third timings are not tweaked. i was running out of ln2 so this is so far.
i know the cpuz mem tab is what you are after. next time i will post it.

[Don_Dan]

That's great kintaro, G.Skill must be binning like mad for these kits.

By the way it's 8-11-9-16. You had me there for a second.

[Zeus]

Still absolutely awesome for Hynix chips. Never knew Hynix could pull this off. Great stuff Kintaro! I bet you don't dare to tell Vdimm for that.