Anyone with his problem?
I have the 11.5.0.1184 on my z77-UD5 and when I update the drivers to 11.5.0.1207 it's stuck at Windows loading animation?
edit:
Note: I was already on Raid 0 with my SSDs and using older Intel drivers, if that helps.
Anyone with his problem?
I have the 11.5.0.1184 on my z77-UD5 and when I update the drivers to 11.5.0.1207 it's stuck at Windows loading animation?
edit:
Note: I was already on Raid 0 with my SSDs and using older Intel drivers, if that helps.
Last edited by biassj; 07-31-2012 at 05:07 PM.
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
1. Do you know a better method to verify, if Trim is working or not?
2. My Crucial M4 SSD's are not Sandforce based.
3. Today or tomorrow I will transfer my RAID0 array from a Z68 to a Z77 system, which is using the same Intel RAID ROM version. After having done the "Hex test" again, I probably can say more about the validity of it.
Which Intel RAID ROM version is in your mainboard BIOS chip?
Fernando did you estract the Bios OROM Raid Intel RAID ROM module v11.5.0.1582 from that Biostar Bios ? If so please can you post it here and share it with us to give it a try , im also in transition to upgrading from my old dying , and aging Asus Rampage 3 eXtreme x58 mobo i7 950 combo , to a newly fresh Asus Z77 Mobo and i5 3570k so i will have a lot of testing going on with Z77 Intel chipset during the next few days.
Nevermind i found it: http://www.xtremesystems.org/forums/...1582-available!!!
Thanks to canthearu : http://www.canthearu.com/pchraidr.bin
You can find this Intel RAID ROM v11.5.0.1582 and other RAID ROM modules >here<. They are already extracted and tested by me.
anyone saw any better perfomance with this new RAID ROM ???
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Friend,
The OROM code has been extracted from the BIOS I provided and it is available at the thread I created myself.
Link for my thread at this very own forum is here.
Link for extracted OROM is provided by user canthearu (thank him for that!): http://www.canthearu.com/pchraidr.bin
User Fernando is also doing a GREAT job spreading news about this updated OROM (thank him too). Let's hope it's final and not beta.
Last edited by medeirosdez; 08-01-2012 at 01:02 PM.
Just to clarify this: Yes, I have extracted the ROM module from the BIOS myself and that is the file I am offering >here<. I did not use the ROM, which was extracted by canthearu.
Thank you guys
Well, in theory, the rom from my site should be exactly the same as Fernando's, since they were both extracted from the same ROM.
Fernando: TThe new 11.5.0.1582 ROM works fine with the older 11.1.0.1006 drivers on my P55 board.
Last edited by canthearu; 08-01-2012 at 04:51 PM.
fernando, with non sandforce, i think you may be seeing GC rather than trim. what we are not privy to are the inner workings of controller FW and how they handle/don't handle metadata and how they utilize any sort of file system aware translation layering. for all we know, we could be seeing just a response to a simple delete, and the drive/FW responding GC algorithms. again, it would be ultra cool to have raid trim (i think) under win7/server 08r2. i don't think the hex thing is a be all end all when you include the drive's inner workings. proprietary inner workings. good luck.
Asus Rampage IV GENE
i7 3930k
8 gigs Mushkin 2133
HIS 7970
2x OCZ Vector 256gb raid0
Crossover 27Q
Since the Garbage Collection is a feature of the SSD's and has nothing to do with the environment (chipset, OS, drivers, RAID ROM etc.), please explain:
How is it possible, that in my Z68 system the test file data have been still present within their RAID SSD cells hours after the delition. whereas they were completely erased within seconds with my Z77 system?
Please try to explain it.
well, it does. unless you have personal access to proprietary goings on with FW creators, how do you know what you are 'seeing' is actually what is happening? the workings of translation layers and pointers within the FW/ssd themselves are pretty much guarded secrets. you may be surprised at how ssds these days can 'sync' with file system hints. i was.
Asus Rampage IV GENE
i7 3930k
8 gigs Mushkin 2133
HIS 7970
2x OCZ Vector 256gb raid0
Crossover 27Q
@ m.oreilly:
Thanks for your response, which did not persuade me really.
@ all:
Yesterday I have repeated the "Trim test" with an Intel Z77 mainboard while running Windows 7 x64.
Beside mainboard and CPU the system (hardware ansd software) was exactly the same as before with an Intel Z68 chipset mainboard, where the "Trim test" failed (data were still present after the delition).
Here are the test results:
1. Hex Offset data of the sector of the RAID partition C: with the JPG test file:
2. Hex Offset data of the same sector about 5 seconds after having deleted the file:
3. Just for a comparison here is the pic I took with my Z68 system 1 hour after having deleted the test file:
By the way: With the Z77 mainboard I got the same results while running Windows 8 x64. The related Offset data of the test file sector zeroed out within a few seconds after the delition.
Regards
Fernando
Last edited by Fernando; 08-03-2012 at 01:11 AM.
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Yes, my test results do 100% confirm your earlier findings:
Trim is working within the RAID0 array under Win7 and Win8, if the mainboard has an Intel Z77 chipset and the user has flashed a BIOS with an Intel RAID ROM v11.5.0.1414 or higher and uses the Intel RST(e) RAID drivers v11.5.0.1184 or higher.
Additional finding:
Mainboards with an Intel Z68 chipset are not (yet) supported by this Trim into RAID feature.
Last edited by Fernando; 08-03-2012 at 10:07 AM.
Well done, Fernando!
Thanks a lot Fernando for all the hard work , testing, help and findings. Well Done. This is what XS its all about to share and help each other
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
'Best Bang For The Buck' Build - CM Storm Sniper - CM V8 GTS HSF
2500K @ 4.5GHz 24/7 - Asus P8Z68-V Pro Gen3 - GSkill 2x4GB DDR3-2400 C10
Sapphire Vapor-X 7770 OC Edition - PC Power & Cooling Silencer MkIII 600W
Boot: 2x 64GB SuperSSpeed S301 SLC Raid 0 Work: Intel 520 120GB
Storage: Crucial M500 1TB - Ocz Vertex 4 128GB - 4x 50GB Ocz Vertex 2
HDDs: 2 x 1TB WD RE4 Raid0 - Ext.Backup: 2 x 1.5TB WD Blacks Raid 1
Release notes for RST 11.5.0.1207 drivers have been made available! Here is the link!
Also confirmed: OROM 11.5.0.1582 is FINAL, not beta!
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Bookmarks