Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds.

[st0ned]

I'm working on as tight timmings as I can at 2400 cl10, 2400 cl9 with 4 sticks will ask for hardcore volts (or high binup chips ).
Atm I'm doing 2400 10-11-12-20, funny thing 10-11-11 will cause errors. Then I'll go for 2600 cl11 but idk if I'll be able to do it without too much volts.

[Hotrodsun]

Any one have any suggestions for Drive strength settings? I came up with this on my Asus Crosshair V w/1100T 1.3v cpu/nb, cpu 1.45v (needed for 4.0ghz)
also tried loosing the timings up some, but didnt help any.

DQS Drive Strength of X1.25

Data Drive Strength of x1.25

Mem Clock Drive Strength x1

ADDR/CMD x1.25

CS/ODT x1.5

CKE x1.5

This got me in the 970mhz range, stable at 943mhz


Look correct or did I missing somthing?

Thanks, Adam

[andrenoites]

Increasing the volts to 1.725V gives my 2x4Gb Kit this stable setting:

2470mhz 9-11-11-31 T1

Asus M5A97 PRO + FX-8120

[andrenoites]

Any one have any suggestions for Drive strength settings? I came up with this on my Asus Crosshair V w/1100T 1.3v cpu/nb, cpu 1.45v (needed for 4.0ghz)
also tried loosing the timings up some, but didnt help any.

DQS Drive Strength of X1.25

Data Drive Strength of x1.25

Mem Clock Drive Strength x1

ADDR/CMD x1.25

CS/ODT x1.5

CKE x1.5

This got me in the 970mhz range, stable at 943mhz


Look correct or did I missing somthing?

Thanks, Adam

Your settings gave me more 10mhz with same voltage.
My everyday use is now 2480mhz 9-11-11-31 T1 1.725V (board overvolts to 1,73v)

Tnx

[Hotrodsun]

Your settings gave me more 10mhz with same voltage.
My everyday use is now 2480mhz 9-11-11-31 T1 1.725V (board overvolts to 1,73v)

Tnx

Dont know if your board has a VDDA voltage setting, I went from 2.5v to 2.6v gave me about 20mhz maybe it could help you too. Glad I could help someone, Adam