me haz one too
sorry for the bad pic but its from my old HD2 :p
Another one with a bit more dust on it
another one
i'm waiting for some watercooling parts to refresh my WC setup and i ll post again
this is probably a stupid question but i'm assembling my bench right now and i can't figure out what one of the parts are... it's like a flex fan mount, but not flexable nor is it in the manual
is this a fan mount?
EDIT: very nice looking test table! really like black
mine
this is the flexfan v2, you can place the washer in the upper part of the fan mount.
DIMASTECH Official Support ENGLISH
DimasTech USA Shop (serving USA/CANADA and South/America)
DimasTech Global Shop (serving europe and worldwide, excluding Americas)
Want to be a DimasTech Reseller?
Want to be a DimasTech Solution Partner?
Visit and Like Us - DimasTech Global FaceBook Page
Visit and Like Us - DimasTech USA FaceBook Page
Finally finished my build a few days ago and managed to get a couple of pics. PC specs below. I could not be happier with the Dimastech Easy Dual v2.5. Super simple to work on and lots of options to accomodate watercooling equipment
There was absolutely no way I was going to be able to shoehorn the fans and radiators inside the case. Early on I decided I was mounting everything on the outside of the case, and I believe it turned out great aesthetically and functionally. I love having the Swiftech MCP35X pumps built-in to the radiators because it simplified the installation a great deal.
Currently playing Battlefield 3 at 2560x1600 on Ultra settings and this thing doesn't even break a sweat. All 6 radiator fans and the 2 Swiftech MCP35X pumps are on PWM control, which makes for an incredibly quiet machine.
PC
Case: Dimastech Easy Dual v2.5 (black)
PSU: Silverstone Strider 1500w
Mobo: ASUS Maximus IV Extreme
CPU: Intel 2600K (currently at a quick and dirty 4.8GHz overclock, still need to tweak things and see how much higher it can go)
RAM: Corsair Dominator GT (2x4GB) DDR3 2000
SSD: Intel 510 250GB
GPU1: GTX580 3GB w/ EK Backplate
GPU2: GTX580 3GB w/ EK Backplate
GPU3: GTX580 3GB w/ EK Backplate
Monitor: Dell 3008WFP
Cable Extensions: BitFenix Alchemy cables (red)
Watercooling Loop
CPU Block: EK Supreme HF Rev. 2 - Acetal
GPU Blocks: 3x EK-FC580 Acetal (connected via EK-FC Bridge Triple Parallel)
Radiators/Pumps: 2x Swiftech MCR320 Drive Rev. 2 Radiators with built in MCP35X PWM Pumps
Reservoir: EK-MultiOption RES X2 - 250 Advanced
Fans: 6x Scythe Gentle Typhoon 1850rpm
Tubing: Primochill LRT 3/8" ID--5/8" OD
Fittings: Bitspower Carbon Black Fittings (ordered these direct from Bitspower in Taiwan...was a HUGE PAIN getting them to reply to order request emails)
Coolant: Distilled Water + PT_Nuke PHN + Feser Base Corrosion Blocker
Last edited by gelatinousfury; 11-06-2011 at 10:37 AM.
Dimastech Easy Dual v2.5 (black)-----Silverstone Strider 1500w-----ASUS Maximus IV Extreme-----Intel 2600K-----Corsair Dominator GT (4x4GB) DDR3 2000-----2x Samsung 840 Pro 256GB SSD's-----2x GTX Titan 6GB SLI-----Dell 3008WFP
Watercooling Loop: EK Supreme HF Rev. 2 - Acetal-----2x EK-Titan Acetal connected via EK-FC Terminal Dual Parallel-----2x Swiftech MCR320 Drive Radiators w/ built-in MCP35X Pumps-----EK-MultiOption RES X2 - 250 Advanced-----6x Scythe GT 1850rpm Fans-----Primochill LRT 3/8" ID - 5/8" OD (Red)-----Bitspower Carbon Black Fittings-----Distilled Water + PT_Nuke PHN + Feser Base Corrosion Blocker
This red/black mix looks good !
Worklog 1: ★★★ Project: Icebreaker ★★★
Bundymania @Facebook: Come and join me now
Triple (360) Radiator Roundup with 22 Rads !
Swiftech MCP35X Pump Review /// Roundup -> Bay Reservoirs & Laing Tops !
Review: 22 CPU Waterblocks // Review: 4x Tecnofront Reservoirs !
Quad Radiator Roundup - 11 Rads tested
Update: Mora 2 / Mora 3 / Phobya 1080 Xtreme & Supernova 1260
Tubing Comparison: 3/8" & 5/8" from Masterkleer, Primochill, Tygon, Kooolance, Nalgene
Work in progress.....
SR-2-2x X5650 Xeons-3x 670 FTW-1x 120Gb Force GT-1x 240Gb Force GT-1tb WD Green-12Gb Dom GT 1866-Platimax 1500w-2x HK3-2xD5-24v controller-3x RX 480's-3x NiBlk HK GPU blocks-Koolance tops-BP res-15x SP120's-Little Devil V8.
Got mine on Friday. (Australia, Perth)
Looks good !
Worklog 1: ★★★ Project: Icebreaker ★★★
Bundymania @Facebook: Come and join me now
Triple (360) Radiator Roundup with 22 Rads !
Swiftech MCP35X Pump Review /// Roundup -> Bay Reservoirs & Laing Tops !
Review: 22 CPU Waterblocks // Review: 4x Tecnofront Reservoirs !
Quad Radiator Roundup - 11 Rads tested
Update: Mora 2 / Mora 3 / Phobya 1080 Xtreme & Supernova 1260
Tubing Comparison: 3/8" & 5/8" from Masterkleer, Primochill, Tygon, Kooolance, Nalgene
DIMASTECH Official Support ENGLISH
DimasTech USA Shop (serving USA/CANADA and South/America)
DimasTech Global Shop (serving europe and worldwide, excluding Americas)
Want to be a DimasTech Reseller?
Want to be a DimasTech Solution Partner?
Visit and Like Us - DimasTech Global FaceBook Page
Visit and Like Us - DimasTech USA FaceBook Page
Hehe thanks! I would have to admit your DimasTech bench was definitely some inspiration!
Haha thanks. Was a little anxious and ended up finishing the build earlier then expected. This bench was a breeze to assemble and was actually enjoyable. Will definitely recommend and possibly order more products from DimasTech
They look like nice benches that's for sure I only just bought a DD Torture Rack (EATX version) and loving it
Edit: Updated pics to the latest.
Last edited by DrEvil; 12-20-2012 at 03:34 PM.
Mine
Gonna get it powdercoated when i upgrade system......thinking maybe pastel orange. Also waiting on Corsairs sleeved cables. I have sleeved extensions but theres not much room inside for psu cables let alone psu cable+extension cables.
Current set up is: MSI P55-GD80 - i5 760 @4ghz - Asus DCII GTX580 - Corsair Vengeance 1600mhz C8 - GTX360 - EX360 - AP15's - EK Blocks Nickel/Acetal - 2x D5's in Koolance RP-452X2.
Mine on the way
I will post some pictures after installation complete
Gaming rig;
ASUS RAMPAGE IV BLACK EDITION
I7-4390K
G.SKILL Trident X 16GB 2400
Intel 530 240GB
2x Asus GTX780
Corsair AX1200
HP ZR30w 30
Win 8.1 pro
Sound rig;
Auzen X-Fi H.T. HD --> Yulong D100 MKII --> D-7100
still under construction. water+sleeved cables are the next tasks
very nice...love the white cable..look like hair..
DIMASTECH Official Support ENGLISH
DimasTech USA Shop (serving USA/CANADA and South/America)
DimasTech Global Shop (serving europe and worldwide, excluding Americas)
Want to be a DimasTech Reseller?
Want to be a DimasTech Solution Partner?
Visit and Like Us - DimasTech Global FaceBook Page
Visit and Like Us - DimasTech USA FaceBook Page
A few years late but finally no more stack of mobo boxes. Lol
Been hittin' the start button million times with mobo on top of box which made the board kinda bend out. When the button started to give up this bench table make the mobo's spine straight like an arrow
Awesome work Dimas
Last edited by Dumo; 07-13-2012 at 08:47 PM.
TAh2o.JPG
this is the latest version. Dumo, I'll loan you mine if you want to mount a bigger rad.
The ac unit is staying here though.
In memory of Gracie, my sweet, sweet wife and mother of my children. Darling, we will miss you dearly. May you rest in peace (born to this world on March 30, 1976; went to her Heavenly Father on Good Friday, April 22, 2011).
http://animoto.com/play/E0wFhd6tN0nA...ent=challenger
Heat
Awesome Pics Guys. I must upload pics from my Dimastech Benchtable
Bookmarks