SuperPi32m 5Ghz Ivy All Out Challenge!

[Splave]

how does one get a 4.250 first iteration, crazyness

[dinos22]

first iteration doesnt mean anything, well it could mean someone started at higher clock but i doubt anyone would do that here, we're benching for fun
ive seen it start at that also a few times but i prefer it starting slower hehe

[youngpro]

Cheapseats final loop is waza and mem timings

[dinos22]

i read discussions about tweaks, OSes etc. Hehehehe if it was only that simple. Wait till you start testing a load of OSes and other parameters and then come back with your head itching

[Hondacity]

-updated

*angholic, nice to see germans grabbing #2 we appreciate your frozen pics
*c-n and dumo .... airsanity!
*team.pure in the house, Deux welcome aboard

[ZenEffect]

about OS's... its alot of chasing the dragon. doesnt matter what, someone will always be faster in pi with same clocks and similar timings. in the end one would think the only variable is the OS. my advice here is this, dont act like a tweaker when you are tweaking... you cant ever catch that dragon because once you do it will slip through your fingers once again. just use what you know works well and tune out your subs and waza. once that limit is reached, then go back to the OS for the finishing touches.

super sauce TW S2K3? meh, tried it... not much faster than a well tuned XP
ramdisk? slightly faster until waza is fine tuned. then gain is very minimal, mabye im doing it wrong? (not sarcastic, i actually question this)
maxmem? a specific value always worked best for me. over or under results in *slightly* slower scores... talking like .02 or so
stripped os? can make regular XP just as fast by disabling services... but if im disabling them anyways... why not just cut them out and make install go faster?
themes? .02 gain olive vs silver consistantly
keyboard vs mouse? i think it gains... though i havent havent tested in quite some time though. i get through setting up 32m faster using keyboard anyways. less thinking more doing.

in the end... the most gain is in bios, the least is in OS (excluding the basics like LSC, maxmem, etc). like 90/10. there is a gain, but is it worth the weeks of building testing rebuilding testing borking os starting over testing retesting....

if you know what you got works well, stick with it. there are alot of different ways to the finish line. you can blast through or finnesse your way in

[C-N]

Well I've lost myself with waza & consistency!!!! I see it makes a massive difference just cant work out what I'm doing wrong consistency wise.

These runs are with the same bios settings only thing different was the waza.....

In this run everything was the same as my .203 entry using RAMDisk like I mentioned to cheapseats.



In this run the only difference was waza..... looks like a crazy fast start then slows down!

[angoholic]

give him better memory this is nearly full optimized
n1 one

thanks

sweet run Angoholic

thank you

dont be surprised mate, cas7 1300 is the

well done!

i do have some issues with wazza there as i caught you at 12th loop and then dropped off badly but part of it is cas7 1300+ & other part is wazza

thx, yup, i know this wazza trouble ..with my runs, most of them from 1-5 is fast, then dropping, but there are also better ones..

how does one get a 4.250 first iteration, crazyness

i suppose that the initial loop does not mean anything for the result. at air settings i had .265 to .313. with cold mem the probability seems to be higher to have a faster initial, but that is not usual, i also had 17-18s times with slow initial loop. some runs 1-5 are ultra fast then dropping very bad, seems that it also depends on wazza.
as far as i observed initial loop depends on:

cpu speed but fixed here..
memory timings (with bbse vs psc on air i got different typical values)
memory speed
wazza effect
whether results from previous runs got deleted or not

first iteration doesnt mean anything, well it could mean someone started at higher clock but i doubt anyone would do that here, we're benching for fun
ive seen it start at that also a few times but i prefer it starting slower hehe

yap, it is all about the fun. if someone would change speed during a run, he needs the RogConnect Server running->impact on PP->need really more clock speeds to get gain->change speed during run-> distribution of loops would be different greater than a bad wazza effect.
in case of doubt to obviate that someone could think the run was at other speed i recorded a video of the first run from yesterday which was cookies time (initial was .281 by the way )



just in case anyone would still have doubts, i could make another one re-running showing that ROG Connect was NOT involved.

we appreciate your frozen pics

want more?

[Splave]

I wasnt doubting mate, I was impressed flushed out my current best backup till I get my stuff back from taiwan

[aristidis]

And some improovement from me with Formula

Aristidis - 6.18.735 - 106.4X47 - 1276.5Mhz - 8-10-7-22-72-1 - ASUS MAXIMUS V FORMULA - GSKILL RIPJAWS PC17000CL8 2X2GB/BBSE - 1.84V - AIRCOOLING


lowclock_6.18.735.jpg

[angoholic]

I wasnt doubting mate, I was impressed flushed out my current best backup till I get my stuff back from taiwan

no one accuses anybody here i meant just IF someone WOULD do.. you mean the sticks from andre?

And some improovement from me with Formula

insane air time!

[Splave]

No lol he wont let those out of his sight I meant my chips and benching suitcase

[Splave]

Splave - 6:17:640 - 48x104.2 - 1354.7MHz - 6-11-7-25-96-1 - ASUS Maximus V Extreme - G.Skill Trident 2400mhz 2x2gb/PSC - 1.98v - LN2 All


limit of IMC, will try another chip

[angoholic]

pretesting for 6.8 32m?

[OC Nub]

Splave - 6:17:640 - 48x104.2 - 1354.7MHz - 6-11-7-25-96-1 - ASUS Maximus V Extreme - G.Skill Trident 2400mhz 2x2gb/PSC - 1.98v - LN2 All


limit of IMC, will try another chip

Great score!

[Hondacity]

-updated

*Ari is king of Airsanity!
*splave and angholic battle for 2nd and 3rd crazeee

[Splave]

pretesting for 6.8 32m?

'
guilty! got some new ram sinks coming to to try out to, raja turned me on to the importance of paste and mass on ram sinks

thanks oc_nub

[maxxx]

Crazy result Splave. Getting over my 6m 20s is getting impossible for me. Wazaa driving me nuts.

[ToyTen]

My first "good" score on this bench:

ToyTen - 6:34:260 - 48x104.2 - 1146.3MHz - 9-10-8-21-79-1 - Asus Gene V - Gskill Perfect Storms 17066CL9 2x2GB - 1.73v Air Cooling




Lots of improvements to do yet, as i cant have XP on this computer

[andressergio]

Manage to lower on my 24/7 settings

andressergio - 6.34.260 - 100x50 - 1300Mhz - 10-12-12-25-1T - M5G - PATRIOT VIPER II XTREME 2400CL11 2X4GB - 1.665V - AIRCOOLING

[mike]

I wasnt doubting mate, I was impressed flushed out my current best backup till I get my stuff back from taiwan

using backups??? Sneaky!

[Vivi]

Lots of improvements to do yet, as i cant have XP on this computer

You enabled Hard drive mode IDE not AHCI in bios right

[ToyTen]

You enabled Hard drive mode IDE not AHCI in bios right

yes, i just couldnt figure that there was an incompatibility with my Raptor 74Go & the rest of my hadware ... just couldn't beleive it


it is fixed now. I have XP but i have terrible results... The one i posted was made with a fast SSD but on my h24 OS, now im back with a simple old HDD. that chould explain why i guess.

If i cant get decent score i might need another fast SSD.

Thx

[youngpro]

And some improovement from me with Formula

yeah nice aristides, thats a proper efficiency at 28500 MB/s read

[aristidis]

yeah nice aristides, thats a proper efficiency at 28500 MB/s read

Thanks i will try to cold my rams but with another board because that one has problem even with cold on rams