SuperPi32m 5Ghz Ivy All Out Challenge!

[youngpro]

Rosty keep working on your efficiency, with the right OS/waza you should be in the low 16 seconds with your settings, probably dont even need c6 1350 to take top spot!

[BeepBeep2]

If I have no rampot, can I just wrap up the dimms really well and insulate the board and pour on them directly? Maybe tinfoil?
In late July, I'm gonna sell off half of my AMD stuff, and bench my 2600K/MIVE for points, then sell it off too for MVG and 3770K, then I'll do this too.

[M.Beier]

If I have no rampot, can I just wrap up the dimms really well and insulate the board and pour on them directly? Maybe tinfoil?
In late July, I'm gonna sell off half of my AMD stuff, and bench my 2600K/MIVE for points, then sell it off too for MVG and 3770K, then I'll do this too.

Sure tinfoil works, but impossible to control temp

But, you should request being listed by Honda - It depends on his mood if you get on the list or not.

[ZenEffect]

hey man, alot of us arent even using a ram pot. 99% of the scores here are all air.

[Rosty]

Rosty keep working on your efficiency, with the right OS/waza you should be in the low 16 seconds with your settings, probably dont even need c6 1350 to take top spot!

ok, i use a normal xp sp3, task manager shows 19 service and size 105mb, i will work with that and waza in the weekend, thank you

[El Gappo]

Haha love it

[youngpro]

ok, i use a normal xp sp3, task manager shows 19 service and size 105mb, i will work with that and waza in the weekend, thank you

yeah keep pushing i think you can do it mate

[BeepBeep2]

hey man, alot of us arent even using a ram pot. 99% of the scores here are all air.

My PSC aren't very SB friendly so I don't expect them to be IB friendly, been having to use 1.86v to run what I can on AMD @ 1.76v so I'm thinking maybe LN2 rams will make it a little easier.

[trans am]

If I have no rampot, can I just wrap up the dimms really well and insulate the board and pour on them directly? Maybe tinfoil?
In late July, I'm gonna sell off half of my AMD stuff, and bench my 2600K/MIVE for points, then sell it off too for MVG and 3770K, then I'll do this too.

I'm in the same boat as you. same pi kit etc.
I was thinking a zip loc bag over the dimms with crushed dice and saddle bag over the rams then I started thinking.

maybe that retarded fan that came with the pi kit is actually worth something.


I got up to this point. its up to you to take it to the next level.

[trans am]

Sure tinfoil works, but impossible to control temp

But, you should request being listed by Honda - It depends on his mood if you get on the list or not.

@M.Beier and Honda, whatever crap you have between you guys it needs to end. its time to bury the hatchet and move on. this thread is a new milestone on xs for many reasons. there is barely enough room for the 6.20 runs and there is definitely no room for this crap between beier and honda. Whatever it is you guys need to kiss and make up. I'm still trying to get below 6.25 and I'm making ghetto ram pot designs and stupid vids for everyone else because I cant get focused on this contest. The last thing I need is M.beier and honda against each other. Beier, take that "honda is permanently ignoring my posts" message of your sig. that is just adding fuel to the fire. honda you need to either tell him to F off or forgive him. dont ignore anyone. that is what women do. you're not a woman. beier isnt either. Just bury the hatchet so we can get this over with. this is the only thing in this thread that is setting it back from being the best xs thread since the winbond ch5 (bh5 replacement ic thread)
its 4th of july weekend. This is me at my last 4th of july party.
I am going to post this link one time and one time only so you guys forget your woes with eachother and start fresh.
GO!

http://youtu.be/eecPomCLEWE

[M.Beier]

@M.Beier and Honda, whatever crap you have between you guys it needs to end. its time to bury the hatchet and move on. this thread is a new milestone on xs for many reasons. there is barely enough room for the 6.20 runs and there is definitely no room for this crap between beier and honda. Whatever it is you guys need to kiss and make up. I'm still trying to get below 6.25 and I'm making ghetto ram pot designs and stupid vids for everyone else because I cant get focused on this contest. The last thing I need is M.beier and honda against each other. Beier, take that "honda is permanently ignoring my posts" message of your sig. that is just adding fuel to the fire. honda you need to either tell him to F off or forgive him. dont ignore anyone. that is what women do. you're not a woman. beier isnt either. Just bury the hatchet so we can get this over with. this is the only thing in this thread that is setting it back from being the best xs thread since the winbond ch5 (bh5 replacement ic thread)
its 4th of july weekend. This is me at my last 4th of july party.
I am going to post this link one time and one time only so you guys forget your woes with eachother and start fresh.
GO!

http://youtu.be/eecPomCLEWE

hah, very well removed it :-)
Think you are takin' it too seriously though, dont mind, was just impressed when it was quoted twice.

Next 32M round; Friday, taking UD5H for a spin, hope ram will be in 1350-1400 range.

[andressergio]

my first on the MG5 nothing tweaked just a bit less than my last points


andressergio - 6:38:091 - 50*100 - 1300mhz - 10-12-12-25-147 1T - M5G - Team X LV 2400C9 - 1.655v Air



Uploaded with ImageShack.us

[BeepBeep2]

I'm in the same boat as you. same pi kit etc.
I was thinking a zip loc bag over the dimms with crushed dice and saddle bag over the rams then I started thinking.

maybe that retarded fan that came with the pi kit is actually worth something.


I got up to this point. its up to you to take it to the next level.

Hmm I don't have that fan, traded my kit off Zen for STT 2200 C8 MGH-E. I don't know if he has the fan or not but I didn't want one anyway.
I think I'll just wrap the dimms in tinfoil, maybe I can throw some old pennies in there, or I'll figure something out.

These take way too much voltage on SB compared to AMD...its crazy.

[trans am]

Hmm I don't have that fan, traded my kit off Zen for STT 2200 C8 MGH-E. I don't know if he has the fan or not but I didn't want one anyway.
I think I'll just wrap the dimms in tinfoil, maybe I can throw some old pennies in there, or I'll figure something out.

These take way too much voltage on SB compared to AMD...its crazy.

exactly. I doubt my method will work but regardless, it really felt good to cut that stupid fan off.

[ZenEffect]

protect the dimms and slots with vaseline and just get a brick of dice and set a big chunk on top. using the heatspreaders, the dice will cool the dimms. gravity will keep pressure on the dice so its constantly cooling.

[l0ud_sil3nc3]

protect the dimms and slots with vaseline and just get a brick of dice and set a big chunk on top. using the heatspreaders, the dice will cool the dimms. gravity will keep pressure on the dice so its constantly cooling.

this

[BeepBeep2]

protect the dimms and slots with vaseline and just get a brick of dice and set a big chunk on top. using the heatspreaders, the dice will cool the dimms. gravity will keep pressure on the dice so its constantly cooling.

Buuuuuuuuuuuuuuuuutttttt me no likey vaseline!
Well...you know what, I'm open to anything. I've already done that before for short runs and just let the frost build up...

Either $380 CPU or $140 motherboard are dead in my SB setup or even both so I don't think I'll be getting Ivy unless I can get an RMA on the mobo in case that is the problem.

[Splave]

Splave - 6:17:734 - 48x104.2 - 1354.7MHz - 6-11-7-25-96-1 - ASUS Maximus V Extreme - G.Skill Trident 2400mhz 2x2gb/PSC - 1.98v - LN2 All



G.skill Andre Edition Ram, Incredible sticks...

[l0ud_sil3nc3]

nice work Sprave

[Hondacity]

-updated

number2 result from a hotel room? nonetheless completely dominating! excellent results Splave

[youngpro]

i wanted to just tag fester on air to start with, subzero memories hopefully next week

youngpro - 6m 19.031 - 46x108.7 - 1304.5MHz 8-11-8-28-88-1T - ASUS Maximus V Formula - G.Skill PIS 2200mhz 2x2gb PSC - 1.85v - all air

festertagged.jpg

[BeepBeep2]

"Last edited by youngpro; Today at 01:33 AM. Reason: forgot to edit out splaves name from the copy/paste of settings line!"

omg, hahaha

[Leeghoofd]

Nice teaser James great READ bandwith to start off with !!

[ZenEffect]

pi + pi + pi = pro

killer psc kit you got there James, very nice run too!

[trans am]

Isnt that the truth ^^