.
.
Last edited by Unseen; 08-14-2004 at 04:36 AM.
another one...
i will use it for my vga...
i put a candle to see if it can handle some load...
this is after 30 min...
it is an embraco 1/5 filled with r507c and 3,20m .71mm capilary and a custom evaporator....
first i need to now a way to put it in my vga
and second a good-cheap thermometer to buy from europe...
thanks..
good job! a good way to mount it is get a piece of 1/4in plexi glass and drill a area in the center of is where your suction line goes then dill holes in it and use machine screw + nuts to attach it. srry for the bad description its a bit hard. Ill post a link in a little while.
btw what kind of hose are you using?
it is a simple hose that we use in gauges... but i braze it...
um i hear that those leak eventualy and you cant use them....
on the other system it didnt leaked yet...
ps. sorry for my bad english...
nice
i like the evap that looks like a good weight not too much pressure on the gpu card to warp it
here it is how it looks from inside...
Very nice and clean! Can I have it?
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
wow nice evap.....
and the capline is to long.
sorry that 3,2m was at the beggining i cut it. Now it is 2,95
i remember that evap
you made that ages ago, did you machine it yourself or did you have someone else do it for ya
Last edited by kayl; 08-03-2004 at 11:31 PM.
a friend made it for me...
Nice Job, Evap looks very nice, your english is fine!
Once again,excelent
Maybe you should start producing and selling those phase change systems
"If we knew what it was we were doing, it would not be called research, would it?". A.Einstein
thanks bro...i will think about it
Here it is a small video
http://homepages.pathfinder.gr/unseen/1%2EWMV
Very nice "unseen"
Why do you have the condensor piped in backwords? And a sightglass on the discharge line?
Imagination is a powerful tool.
Posting Permissions
Reply With Quote
is the remedy
Bookmarks