Last edited by Corsaronero333; 03-31-2012 at 08:35 AM.
great work
I cannot wait to see it finished
proud to be from Belguim ^^
Lightpainting and hardware are my life!
Wow, awesome work man!
Asus Crosshair IV Extreme
AMD FX-8350
AMD ref. HD 6950 2Gb x 2
4x4Gb HyperX T1
Corsair AX1200
3 x Alphacool triple, 2 x Alphacool ATXP 6970/50, EK D5 dual top, EK Supreme HF
Absolutely beautiful!
Why yes, yes I do use Koolance..*Flame Wall Inbound*
<insert standing ovation here>
great work! very good craftsmanship in my opinion.
Thanks for the compliment
In all the banquets that respect there is always a need for air flow at the top, in this case we have created a 2 and a right to the left, both featuring 80mm fan but ...... what has been created is well beyond .....
The media can raise and tilt freely to suit asks that a
There's still light and watercooling the entire system and see the beautiful.
In written corsaronero333 will be applied on the underside with a plexy green LED so you can highlight just the writing.
Last 4 photos for tonight, let's see what happens tomorrow
Simply amazing! congratulations on the job!
SORRY FOR MY BAD ENGLISH!
Thanks
E 'with great pleasure that I thank CoolerMaster Italy for the wonderful gift you gave me, a hybrid of Silent Pro 1050W, this PSU is going to integrate into the mod, not before he did the sleeving to the cables.
Last edited by Corsaronero333; 05-04-2012 at 03:50 AM.
Last edited by Corsaronero333; 05-04-2012 at 03:49 AM.
I open the package and to my amazement I find inside the CoolerMaster CoolVivaZ1 2, my mom said to be universal for Nvidia and ATI, you spazziava from 7800GT to 5600 x1330 or x1600, water under the bridge past the hour ..... beautiful and very jealously preserve .....
new......
Finally came the pump, I opted for this mod for Laing DDC-1T Plus
Equipped with mini DDC Bitspower Water Tank of
prepared the stainless steel plate
mounted on top
We continue today with a little 'healthy sleeving, which began late in the night and resumed this morning, the first working 24pin ATX looks good, the scale of tones seems too valuable then .....
continues ..................
The first thing you notice is that the extension cable 24pin ATX is an impressive 70cm and believe me there are many, think about all the times that we need extensions of case above a certain size, a point in favor of CM
Start to cut that is not needed, being careful not to damage the cables below
We open the box of magic Lamptron and start dancing ..........
Preparation ..........
And here is ready for the first time, for even adjust the lengths of heat shrink, and you're done
Mounted in 'Hybrid
Thanks for everything guys.
Today I present the first evidence of the media lights fans
it is sexy!
proud to be from Belguim ^^
Lightpainting and hardware are my life!
Prepare the 2 discs, I will also clear the 2 rubber seals
Add also 2 steel rings already ready in the industry
And here's the surprise, 2 glass tubes that I use as a tank
assembly
beta
Bookmarks