Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds.

[BMWMASTER81]

I have the same board, RAM & CPU & the below works for me @ 1.42v

Hope this helps

> Advanced Memory Settings

M.I.T\Advanced Memory Settings

System Memory Multiplier..........................[22.00
Memory Frequency (MHz)............................[2200MHz

Performance Enhance...............................[Extreme
DRAM Timing Setectable............................[Quick
Profile DDR Voltage...............................[1.50v
Profile VTT Voltage...............................[1.05v
Channel Interleaving..............................[Enabled
Rank Interleaving.................................[Enabled

> Channel A Timing Settings

M.I.T\Advanced Memory Settings\Channel A Timing Settings

Channel A Standard Timing Control

CAS Latency.......................................[10
tRCD..............................................[10
tRP...............................................[10
tRAS..............................................[28

Channel A Advanced Timing Control

tRC...............................................[39
tRRD..............................................[5
tWTR..............................................[6
tWR...............................................[12
tWTP..............................................[24
tWL...............................................[8
tRFC..............................................[128
tRTP..............................................[6
tFAW..............................................[2
Command Rate (tCMD)...............................[1
tRW Stability Level...............................[3
tWR Stability Level...............................[3

tREFI.............................................[6240
tREFIX9...........................................[54
tRRDR.............................................[1
tRRDD.............................................[3
tWWDR.............................................[3
tWWDD.............................................[3
tRWDRDD...........................................[4
tWRDRDD...........................................[1
tRWSR.............................................[4
tRRSR.............................................[4
tWWSR.............................................[4

Tried your Settings, but still can´t post above 2000 Mhz. Seems to me like my CPU has a wall @ 2000 Mhz.
Don´t expected such behavior with Ivy Bridge CPU........but can´t explain this otherwise.
Maybe Mem is bad............................