Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds.

**GripS** · 03-15-2012, 07:53 PM

Interesting... out of stock again already and Amazon has jacked up the 1 they have left in stock to 80 bucks. Last week when they were out of stock Amazon had them for 90+. But when newegg had them in stock the other day they were 48. So lame. Glad I ordered mine when I did.

**SonDa5** · 03-16-2012, 12:05 AM

Originally Posted by BeepBeep2

You never know. Each kit is never the same...

I tried all types of voltages and recommend cas timing settings and I couldn't boot my at 5ghz with my 2500k so I am just about certain I'm going to take back to store and keep the Gskills.

**SonDa5** · 03-17-2012, 02:21 AM

Had some time to play so I broke out the Sammy again.

This time I found a sweet spot for 1870mhz 1T-9-9-9-27 1.56v with 2500k@5ghz.

http://valid.canardpc.com/show_oc.php?id=2299107

I'm thinking about keeping them again.

I might get add a 2x2GB set of Sammy's for a total of 12GB and use the 2x2GB kit for crazy OC benches.

Next test is 5GHZ with the ram at 2133mhz.

**SonDa5** · 03-17-2012, 02:22 AM

doublepost

**GripS** · 03-21-2012, 06:06 PM

So far so good. Still playing around with them but right now cruising at 1866 9-9-9-27 1T with 1.56v. I was also able to move to slots A1 and B1 thanks to the low-profile.

Memtest stable so far and gonna run it for a week as is then see if I can get em to go higher. Already very pleased with these.

**Dumo** · 03-21-2012, 06:53 PM

My local micro center got YKO 1205 batch which some peep took it to DDR3 2933 Cas 11 on Asus M5G

Will try a few pairs of these

**l0ud_sil3nc3** · 03-21-2012, 07:11 PM

YKO 1209 over here to test

**3lfk1ng** · 03-21-2012, 07:18 PM

Currently running 16GB with loose timings of 11-11-11-28 2T @ 1.5V (not even sure if it needs 1.5, I just set it and forgot it). I found that my processor won't go higher than 5.1GHz (sad panda) so at some point in time I will need to focus on ram timings.

**GripS** · 03-21-2012, 07:34 PM

Originally Posted by l0ud_sil3nc3

YKO 1209 over here to test

My kit is the same.

Reduced voltage to 1.5v and still seems to be stable at 1866 9-9-9-27

**Dumo** · 03-21-2012, 09:06 PM

DDR3 2654 @ 1.67V benching freq

**andressergio** · 03-21-2012, 09:41 PM

Originally Posted by Dumo

DDR3 2654 @ 1.67V benching freq

glad i kept 2 kits of 8 of this mem

**l0ud_sil3nc3** · 03-22-2012, 12:27 AM

Originally Posted by Dumo

DDR3 2654 @ 1.67V benching freq

ivy?

sb-e?

regardless great job

**GripS** · 03-22-2012, 11:51 AM

Currently at 1866 9-9-9-27 with only 1.35v now. 2133 is looking like a possibility with added voltage. Still making sure this is stable. Memtest ok so far. Hyper pi 32m ok so far. Now for some BF3 which will typically crash if my system is not stable.

1866stable.jpg

**andressergio** · 03-23-2012, 10:04 AM

Originally Posted by GripS

Currently at 1866 9-9-9-27 with only 1.35v now. 2133 is looking like a possibility with added voltage. Still making sure this is stable. Memtest ok so far. Hyper pi 32m ok so far. Now for some BF3 which will typically crash if my system is not stable.

1866stable.jpg

i have the same mem you can do 2133 10-10-10-28 1T easy at 1.55

test it you'll see

**GripS** · 03-23-2012, 10:44 AM

Originally Posted by andressergio

i have the same mem you can do 2133 10-10-10-28 1T easy at 1.55

test it you'll see

So far so good.

2133.jpg

**splmann** · 03-23-2012, 12:32 PM

New Toy has arrived from the US !

Ready for AMD Bulldozer Memory OC Action

**3lfk1ng** · 03-23-2012, 01:04 PM

I'm super glad to hear that you guys are loving this stuff. I'm pretty impressed by what you guys have managed to pull off.

**andressergio** · 03-23-2012, 02:03 PM

Originally Posted by GripS

So far so good.

2133.jpg

told ya

**andressergio** · 03-23-2012, 06:14 PM

here one of my kits run solid as a rock, i had a nighmare trying to run the ballistix ellite at 2133 CL9 this is lovely like my patriots easy as a pie

Uploaded with ImageShack.us

**andressergio** · 03-23-2012, 07:11 PM

ok i luv them now 2133 9-10-10-28 1T @ 1.5 !

Uploaded with ImageShack.us

**NEOAethyr** · 03-23-2012, 09:17 PM

Originally Posted by andressergio

ok i luv them now 2133 9-10-10-28 1T @ 1.5 !

Uploaded with ImageShack.us

Very good results.
What ram slots are you using with those sticks?, red or black?

**Punisher!** · 03-24-2012, 02:42 AM

So Samsung 1 - Crucial 0 for you?

Originally Posted by andressergio

ok i luv them now 2133 9-10-10-28 1T @ 1.5 !

Uploaded with ImageShack.us

**andressergio** · 03-24-2012, 04:24 AM

Originally Posted by NEOAethyr

Very good results.
What ram slots are you using with those sticks?, red or black?

Red ones but see this im on a new chip thats amazing on te other was impossible so I think it's IMC related

**andressergio** · 03-24-2012, 04:27 AM

Originally Posted by Punisher!

So Samsung 1 - Crucial 0 for you?

Hey punisher as I told NEO I got much better results on this chip and crucials run fine but very sensible to volts not easy, so this Samsung the patriots and mushkin are solid

**andressergio** · 03-24-2012, 04:28 AM

Originally Posted by Dumo

DDR3 2654 @ 1.67V benching freq

Dumo ur flying there grats

Thread: Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds.

Thread Tools

Search Thread

Rate This Thread

Display

YKO 1205 batch

Bookmarks

Bookmarks

Posting Permissions