Let me know if you want to see the screenshots. There's also a new screenshot of 1M at 6.9GHz in the HWBot forum.Originally Posted by MTP04
I was looking for it too and can't find it. I guess the Frenchman got his wish...what a shame.
Dave, I didn't like that this thread was quickly censored while it's still available on many other pages. This casts a poor light on XS in my opinion.
Well, that's just my two cents, back on topic:
Nice benching Aerou!
Edit: 2500th post!
Last edited by Don_Dan; 03-15-2012 at 03:17 PM.
![](http://www.hwbot.org/signature/u15466.png height="110" )
I understand but:Let me know if you want to see the screenshots. There's also a new screenshot of 1M at 6.9GHz in the HWBot forum.
Dave, I didn't like that this thread was quickly censored while it's still available on many other pages. This casts a poor light on XS in my opinion.
Well, that's just my two cents, back on topic:
Nice benching Aerou!
1) What other forums or sites do is their call not XS's
2)Let's be honest, he knew that showing IB benches would cause issues
3) It became a flamefest
4) Wasn't my call although I agreed with the decision.
There are times in life when things are done that we don't always agree with but they are done for the "greater good" and I think that was why this one was deleted.
I love to see this stuff as much as anyone but XS is a place that draws a lot of interest not only from individuals but from companies.
In this case and this is just my guess, the thinking may have been do we here want to piss off one of the biggest companies in the world over one thread?
Also if it's any consolation that thread was up for what? 14 hours. I think most saw what they wanted to see.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
I gained 18 hardware points tonight, added about 25 for the team just messing around on water cooling.
I have a pot (Kingpin Venom Rev. 5.0 with all AMD/Intel mounts through 1366/1155) but no money for LN2. If there are any wealthier people among us that would give me enough cash, old parts, whatever (I am 16 and jobless,) to get points, sufficient DICE or better yet LN2 from local PraxAir or AirGas I would appreciate it greatly. I've done DICE once before, but I know I have a tendency to get a bit "snobby" on the forum here.
http://www.hwbot.org/user/beepbeep2/#Points
http://www.xtremesystems.org/forums/...s-on-water-air
Last edited by BeepBeep2; 03-15-2012 at 09:58 PM.
Smile
i wonder if it will fit 1155 mounting. full pot means maximum insulation. it won't be as cold but yeah it will definitely work.KP's venom pot probly will work if no CB
BeepBeep FTW!
Hardware collection is a process. It took me years to accumulate. We'll get you on board with the ln2 pricing hopefully it gets extended to you.
looks like i've borked another kit of RAM...
the supercrazy Micron PC2700 kit died while doing super-pi 1M at 250 MHz 2.5-2-2-6 1T at only 4 volt
gotta put them in the freezer.
anyway, i've a kit of corsair PC3500 BH-5 super dupah crazy stuff on the way, just hope to not kill them in the first hour of benching. lol
while killing stuff i found the time to test my new 9.99 € CPU
ain't that bad, isn't it ?
http://valid.canardpc.com/show_oc.php?id=2298272
Ram killa
@BeepBeep2: Nice scores and decent clocks on the RAM, Vdimm north of 1.80V?
@Mafio: You're a killer!
I've got some 3500C2 as well, keep me posted on the clocks you can get.
1.793v in BIOS, probably about 1.82v real. 1.7v to be safe for the 3D runs. CPU just won't go.@BeepBeep2: Nice scores and decent clocks on the RAM, Vdimm north of 1.80V?
@Mafio: You're a killer!
I've got some 3500C2 as well, keep me posted on the clocks you can get.
Last edited by BeepBeep2; 03-16-2012 at 07:51 PM.
Smile
From all the IB info in the wild it seems a good idea to hold on to good clocker 2X2gb rams now
psc & bdbg ftw? i think im covered
im curious to see how bbse does on ivy.
Last edited by ZenEffect; 03-16-2012 at 05:56 PM.
Current Status - Testing & Research
Wanna go shopping @ F/S threads down here..thres a bunch of good 2X2 rams on sale
From M5G bios thread posted here theres a couple of BBSE preset profile settings on its dram tweak section...the tighter the better I guess
Last edited by Dumo; 03-16-2012 at 09:19 PM.
i'm curious to see what hypers will do with ivy
Im guessing lots of dead sticks lol
as long as they aren't my sticks i'm ok with that
@Hondacity
(since I see you lead the team HWBOT FX mem clock)
Does FX IMC scale with cold for Memory Clock?
This CPU has a weak IMC. I can't boot Dual Channel 2400+ on any of the 4 slots. However I can run 32M up to 2650 uncore.
EDIT:
Slot 1 did about 2500 MHz
Slot 2 did 2661
http://www.hwbot.org/submission/2266...ram_1330.4_mhz
Slot 3 BSOD'ed when I hit 2400
Slot 4 did about 2500 MHz, but I was using settings that also failed Slot 2 around there.
Last edited by BeepBeep2; 03-17-2012 at 10:12 PM.
Smile
Good stuff BeepBeep2! It should scale from cold on the CPU. This is the 1066MHz 7-10-7 kit, isn't it?
Yeah, I've got one kit of D9, 2 PSC, and 1 Hyper now...though the D9 are pretty useless. XD
RipjawsX 1600 CL6 was certainly nothing special.
I've got quite a bit of DDR2 though, one STT 800 CL4 kit with ProMOS, does 1100 CL4 and two kits of GSkill DDR2-800 HZ D9GMH I need to bin for my Athlon 64 X2 5600.
I asked if the IMC scaled because I still have a bit of uncore headroom. I can hit almost 2800 with this CPU's CPU_NB but that was the highest RAM frequency I could achieve. AFAIK IMC is never really something to gain headroom with cold on the CPU, but I haven't tried Bulldozer cold yet.
Last edited by BeepBeep2; 03-18-2012 at 08:23 AM.
Smile
You're starting to get a real nice collection.
After searching for DDR2 for a long time I'm concentrating on DDR3 now, I just found some decent value sticks on ebay. BBSE, BDBG and some PSC. I just hope I can get them for cheap.
Haha, another ninja-edit. Those ProMOS are decent, but the 800HZ were only a mediocre bin, Crucial 5300 clocked equal most of the time. What voltage do they need for 500MHz CL4 and 600MHz CL5?
Hondacity is benching a 4870 and scoring some nice points, but we want MOAR!
Last edited by Don_Dan; 03-18-2012 at 08:28 AM.
@Beep
The fx adventure was limited coz of coldbug lol, thats on hold hopefully the bd is still around after fiddling with ivy and mvp madness
hmmm maybe i'll play more 2d since 3d is on hold. good stuff
@DD
Woooo thanks capt. Oh btw the 3d06 is not getting points. I don't know why. I already forwarded the result to a staff online 9hours ago but it still isn't giving me silverware
no cb on the 4870 was soo fun. I think I'm the only one using the asus gpu which has a decent vrm but ovp kicks in @ 1.5v.
I'll have a look.
Edit: I think it's broken: Failed to synchronize rankings: Failed to select a row.
Isn't there an OVP mod for this card?
Last edited by Don_Dan; 03-18-2012 at 08:46 AM.
ok I'll delete it and upload a new one.
I'll have to redo this card some other time. OVP fix would make this gpu fly. No artifacts were encountered during benching.
I finished 25L with it and sandy on ln2 too lol. X48 here I come
Please do so and let me know if it works!
Just post some pics in the modding section, maybe we can work something out. Or did you try to find a mod already?
Which chips are on your list for S775 benching?
chips? lots lol 8600/8500/8400/7200/6600/6400/6300 not yet sure if the x48 is best with them. P45 is ok too.
same error message after deleting the result and uploading a new one.
"failed to select a row" maybe there is a limit in the database?
Sounds like my collection, and very similar to Linuxfan's collection too...
The E8500 category needs some work and the E8400 category is still missing WPrime and UCBench...
I tried to fix it but it didn't work, I'll report the submission to the moderators.
Posting Permissions
Reply With Quote
Bookmarks