I'm looking for a kit for a new x79 build. I want something that scales well with voltage. Is this the kit I'm looking for? (Elite 1866 9-9-9-27)
Or is there something better.
I'm looking for a kit for a new x79 build. I want something that scales well with voltage. Is this the kit I'm looking for? (Elite 1866 9-9-9-27)
Or is there something better.
upgrading...
Yes, noticed there's currently no stock for the 1866 Ballistix at the ebay places I'm able to buy.
Wish I had bought 2 kits when the price was good.
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
the samsung rock on X79 check OC nubs results
for P67 patriots 2000 9-11-9-27 they do @ 2133 9-11-9-27 1T on 16GB 1,65V easy
or Mushkins Redline Ridgeback HS 2133 9-10-11-27 1,65V
crucials im about to test 16GB, but FedericoUY tested on MIVE and seem to run awesome
cheers !
Sergio
Last edited by andressergio; 02-27-2012 at 10:51 AM.
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
I lend my kit (that couldn't run at 2133/9-9-9 on my P8P67 Pro + 2600K) to a friend and he could do 2133/9-9-9 on his AMD FX easily.
What did I miss?
I could do 2133/9-11-9-27 with Mushkin 996997 at 1.60v
Last edited by theix; 02-28-2012 at 08:52 AM.
Hi, can you show a MemTweakIt screen to check some secondary and other timings (@2133 if you can boot 9-9-9 or at the speed you can boot them)? Maybe your board sets a value that's too low or wrong. Please do it and I'll compare with my values. Cheers.
EDIT: btw I thought I had a stable config same as yours ( 2133/9-11-9-27 @ 1.6v with Mushkins '996997', but had to bump them to 1.65v to get memtest stable )
Last edited by FedericoUY; 02-28-2012 at 09:25 AM.
Wish someone would try the 8gb sticks. Same specs as the 4gb...
Yeah I know Im not gonna be the first to try either . Im holding off on getting these until someone trys the 8gb sticks though...
Rig 1:
ASUS P8Z77-V
Intel i5 3570K @ 4.75GHz
16GB of Team Xtreme DDR-2666 RAM (11-13-13-35-2T)
Nvidia GTX 670 4GB SLI
Rig 2:
Asus Sabertooth 990FX
AMD FX-8350 @ 5.6GHz
16GB of Mushkin DDR-1866 RAM (8-9-8-26-1T)
AMD 6950 with 6970 bios flash
Yamakasi Catleap 2B overclocked to 120Hz refresh rate
Audio-GD FUN DAC unit w/ AD797BRZ opamps
Sennheiser PC350 headset w/ hero mod
Crucial finally got the 1866 set in stock yesterday, and got my kit overnighted to me. Have an 8120 and Sabertooth now to try them out in.
Heatware Cecil
Im up to 2200Mhz 9-9-9-27-2T with 1.6Vdimm so far.
Heatware Cecil
2000Mhz 8-8-8-24-2T and 2200Mhz 9-9-9-27-2t 1.65V stable.
AMD FX8120 Spi1m.JPGAMD FX8120 4.64Ghz.jpgAMD FX8120 Spi32m.JPGSmart Tracer 2200 999.jpg
Last edited by Cecil; 03-01-2012 at 02:18 AM.
Heatware Cecil
They are performing flawless on AMD systems. Congratuations Cecil, nice speeds there. Enjoy!.
@Cecil
2200 CL9-9-9 out of 8GB sticks is about as good as it can get... Any chance of running say, 2133 1T?
4.6 GHz at 1.36v is really impressive too, most chips need around 1.4v
Smile
Do you mean 8GB dimms, or 8GB kits? I saw Crucial also has 8GB dimms, but I dont have those.
I havent done any 1T testing, as the higher OC you get from 2T always ends up faster.
Im stable up to 4650Mhz 1.356V under load. Havent been able to get 4.7 to pass though. Too much voltage (1.4V) will result in a complete crash as soon as Prime starts. 1.38V will run prime a few passes before cores start dropping out. And 1.362V will run prime for a little while before dropping cores. 1.356V BSODs from not enough voltage. CPU/NB doesnt seem to help either.
Heatware Cecil
I meant 8GB kit, my bad.
As far as your stability on the 8120 goes it probably comes down to cooling. Without water people seem to hit a heat wall and drop cores pretty quick.
You need a considerable OC imo to make 2T faster. Most DDR3 of course can run 1T as far as you want so that's why I asked. I know this kit seems to struggle with 1T at higher frequencies...
Last edited by BeepBeep2; 03-01-2012 at 03:04 PM.
Smile
I have an H100 for cooling, and at 4600 Im at 59C load CPU temp, not core temp. I thought about throwing together a real loop, but the money and hassle isnt worth the 100-200Mhz daily.
Ill give 1T a try. Before when I tested, I always found no or little difference between 1T and 2T or even 3T on the boards that had it.
Heatware Cecil
Only thing Ive been able to do so far is test down to 1.6375V instead of 1.65V at 2200 9-9-9 stable. Also on a side note, got my CPU/NB down to 1.25v so far. Vcore wouldnt go under 1.35V for 4.6 though.
Heatware Cecil
2340Mhz 9-9-9 (not stable)
Smart Tracer 2340 999 2t Spi1m.JPG
2000Mhz 8-8-8 is 1t usable, and is faster then any speed I got with 9-9-9. Also, tRC at 47 (stable SPD rating) was faster then tRC at 40 (mobo's auto setting).
2000Mhz 8-8-8-24-1t tRC 47
Smart Tracer 2000 888 1t trc47 Spi1m.JPG
2000Mhz 8-8-8-24-2t tRC 47
Smart Tracer 2000 888 2t trc47 Spi1m.JPG
2000Mhz 8-8-8-24-1t tRC 40
Smart Tracer 2000 888 1t Spi1m.JPG
Last edited by Cecil; 03-04-2012 at 09:32 PM.
Heatware Cecil
Since i couldn't find a second kit anywhere similar to the one i have i decided to upgrade the memory to something totally different .
Ordered 4x4gb of these 1.5v crucial ballistics today .
Once I get them they will have to take it up against my 2x2gb kingston hyperx @ 1600mhz cas6 1.9V .
All this on thuban and CHIV formula .
Main rig 1: Corsair Carbide 400R 4x120mm Papst 4412GL - 1x120mm Noctua NF-12P -!- PC Power&Cooling Silencer MK III 750W Semi-Passive PSU -!- Gigabyte Z97X-UD5H -!- Intel i7 4790K -!- Swiftech H220 pull 2x Papst 4412 F/2GP -!- 4x4gb Crucial Ballistix Tactical 1866Mhz CAS9 1.5V (D9PFJ) -!- 1Tb Samsung 840 EVO SSD -!- AMD RX 480 to come -!- Windows 10 pro x64 -!- Samsung S27A850D 27" + Samsung 2443BW 24" -!- Sennheiser HD590 -!- Logitech G19 -!- Microsoft Sidewinder Mouse -!- Fragpedal -!- Eaton Ellipse MAX 1500 UPS .
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
I was able to get a heatspreader off and make a picture of the chips :
Main rig 1: Corsair Carbide 400R 4x120mm Papst 4412GL - 1x120mm Noctua NF-12P -!- PC Power&Cooling Silencer MK III 750W Semi-Passive PSU -!- Gigabyte Z97X-UD5H -!- Intel i7 4790K -!- Swiftech H220 pull 2x Papst 4412 F/2GP -!- 4x4gb Crucial Ballistix Tactical 1866Mhz CAS9 1.5V (D9PFJ) -!- 1Tb Samsung 840 EVO SSD -!- AMD RX 480 to come -!- Windows 10 pro x64 -!- Samsung S27A850D 27" + Samsung 2443BW 24" -!- Sennheiser HD590 -!- Logitech G19 -!- Microsoft Sidewinder Mouse -!- Fragpedal -!- Eaton Ellipse MAX 1500 UPS .
Bookmarks