yes your package doesnt arrive until mondayOriginally Posted by shoota
and as i didnt really know you were gona be sending some rams, i ordered that 8x set you showed me on ebay. or perhaps i knew, i just dont listen well.
ehh you can never have enough ram, i want >9000gb of ram then it would crunch so fast.
If you get enough extra just set up a RAM disk just for BOINC - offload some workload from the HDD.
grr.. i sent you that ram cuz you said you wouldn't have any lol.yes your package doesnt arrive until monday
and as i didnt really know you were gona be sending some rams, i ordered that 8x set you showed me on ebay. or perhaps i knew, i just dont listen well.
ehh you can never have enough ram, i want >9000gb of ram then it would crunch so fast.
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
MOAR!
lol. did you need it? i get cheap shipping.im guessing 1gb for each cpu should be enough, i remeber that it was mentioned somwhere in this huge thread..
I might take you up on that in the near future. If the board i got off ebay for the 2419s works then I will only have 2gb ram so I'll need more.MOAR!
lol. did you need it? i get cheap shipping.
Like I said, with that arima I rarely saw over 2.5gb usage so 4gb should be just fine.
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
I think I ran 2GB in mine because I couldn't get it to run fully populated
ohhh yeah! it gets here today!
pretty stoked, after watching the group buy for these a while back, id have never figured that I would accually get one of these!
whooohooooo
well?
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
I have a couple....
Good for you lol! I wish I could sell one and keep it at the same.. it just doesn't work that way..
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
Anyone want to buy a full setup with PSU, just add heatsinks?
Google Arima?
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
??? I have a full setup I'm needing to get rid of. I figured if someone was in this thread, either they have one or they want one.
This thread is specifically for the Arima boards that Google once used. Post up your specs I'm sure someone will want it.
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
Arima 4xOpteron board, 4 8347HE, 8GB PC3200R, XFX 750 Black Edition PSU modified for 12V only. Board is tested and running, the memory is set up to allow for NUMA as well. See, I HAVE an Arima setup to get rid of.
Never doubted you, very similar to mine too. I mean nkrader's..
Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
Cruncher #3: 8-core Xserve 1,1
T400 for non-crunching
"But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG
need a dremel. to mod the 939 brackets.. not gona be running tonight.. meh
I used a pair metal sheers to cut those plastic cups.
i was kinda scared of cracking one, then would have to wait to order another.
I cut in towards the frame and actually cut that long strip out in several smaller square chunks. Start in one corner that the sheers fit in nicely, make a cut...then move in about 1/2" and make another. Then bend that back and forth or it may just pop right off. Mine just flew off once I had the correct width to make the cuts.
i think ive found oem psu plugs for this mobo
so my seasonic will have oem style removable cables. woooot
Linky?
cant get it to boot..
no video, with either videocards..
How long you letting it run? It takes a while to POST, like a good 30 sec.
Also, all 4 RAM slots for CPU0 should be populated first, then the 4 for CPU1, etc. Memory should be ECC registered DDR2. PC2-3200 is what I used.
I never got any of the SATA ports near the bottom of the board to function - probably driver thing. The upper 2 work fine.
Last edited by Sparky; 02-28-2012 at 10:43 PM.
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
What kind of video cards?
Posting Permissions
Reply With Quote
Bookmarks