I haven't posted here in a bit, but got a question. After my tax return gets back I am going to have a local machine shop make one of these out of copper.
My loop is currently 25% Dex-Cool 75% water and has been tested to -10C circulating hot side would be pure distilled water while the cold side would be the dex-cool obviously. I have a MCR420, MCR320 and MCR220 stack plumbed into the loop with multiple 320/220's sitting on the shelf depending on how this goes. Circulation provided by a D5 (@D4) and D4. That would be for the TEC side obviously the CPU/GPU side will be a maze 4 GPU and I can't remember what the hell I have on the CPU doesn't matter. Got a MCP350+top for the pump. Fans on the rads are Delta 250+ CFM 120x32mm in a push/pull.
What should I shoot for wattage wise on the TEC's that block will fit 9 40x40mm TEC's. I have the powersupplies to run pretty much whatever (a big pyramid and multiple meanwells). I don't pay for electricity so I don't really care about the power draw. I am shooting for very cold and I am going to get this to be an all in case minus the powersupplies just for giggles.
Bookmarks