Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds.

[TEDY]

are these the correct ones? do they ship to slovenia?

http://www.amazon.com/Samsung-Electr.../ref=pd_cp_e_2

eh they don't.......where to buy in europe?

[Don_Dan]

You sir are a failure,2400 divider works only on 1% of SB cpu's and on some ES.So it's not the board to blame it's the cpu.Go test 2133 9-10-10,how much v will require?

Watch your language, we're all here to learn.

hey Don how are you ? so its not something you can correct with a BIOS update ? :/ i was gonna ask raja asus about this

cheers !
Sergio

Hey Sergio, I'm fine thanks, hope you're doing well too.
No, it can't be corrected with a BIOS update, it's a hardware issue. Good to see you pushing hardware, although it's not a Gigabyte board!

[Punisher!]

@andressergio

CPU speed and BCLK affect results, do an apples to apples comparison at 2133 9-11-9 and 2133 10-10-10. Also, good hynix will do 2133 9-10-9, not 9-11-9...

Are you sure about that? Because I can't find anywhere any stability test with those settings with any platform.

I don't consider a SuperPi test neither near or similar to a stability test because it is not.

[TEDY]

would anyone from USA willing to buy for us in eu? we have paypal and all.
cost+shipping fee + 5%

[andressergio]

@andressergio

CPU speed and BCLK affect results, do an apples to apples comparison at 2133 9-11-9 and 2133 10-10-10. Also, good hynix will do 2133 9-10-9, not 9-11-9...

yes beep im just too lazy to take the patriots out now but i did the comparison and there was a bit of dif as i told you

btw my patriots are hynix but rated 2000 9-11-9-27

this samsungs i just bought them to do 2400 and i honestly didnt know the SB retail dont have that strap unlocked only ES so for me its end of the story i know the samsung is good mem but not for P67A, for this chipset i would go patriot 100%

cheers
Sergio

[andressergio]

Watch your language, we're all here to learn.

Hey Sergio, I'm fine thanks, hope you're doing well too.
No, it can't be corrected with a BIOS update, it's a hardware issue. Good to see you pushing hardware, although it's not a Gigabyte board!

thanks Don yeah MR Alex-ro woke up on a bad mood i guess im just learning from this experiencie the bad way, but im happy either way i love to test mem
its a pitty that retails CPU dont do 2400

jeje yeah i went to ASUS this time nice board mate !

cheers from here and thanks for your support always
Sergio

[andressergio]

The results I had posted were the best I was able to do with these.

I also tried them on my Gigabyte p67 board, but the results werent very good. The Asus board may be much better with this kit after seeing andressergio's results, or maybe I didnt find the right settings.
The Giga p67 did like the GSkill RipjawsZ 16gb kit, was able to run them at 2133 9 10 9 28 1t, 1.66vdimm http://www.xtremesystems.org/forums/...=1#post5008754. I think all boards act different with a particular kit of ram, some like kit A, and the next board doesnt, but clocks great with kit B for example.

I think they are a very good value and most people will be pretty happy with them.

no you are right OC nub giga dont push this mem as ASUS do, as i told the guys i can go pushing bclk till 108 on the MIVE and mem will go up easy but wasnt my aim, i wanted them to do 2400 but well bad luck i didnt know the issue of retails 2600K

yes are a good choice for anyone specially on X79

but for P67A patriots the best for sure

cheers
Sergio

[andressergio]

guys in case i can help you choose cheap and very fast and rock solid RAM this is what i tested and rock solid setups

for P67A

2x4GB MUSHKIN REDLINE RIDGEBACK RED 2133 9-10-11-28 1.65v, tested 16GB amazing RAM, will go up to 2250 same timmings not touching a volt

2x4GB PATRIOT Xtreme 2000 9-11-9-27 1.65v, tested 16GB much better than above mushkins they go up easy even with my chip at 5.6Ghz

3x2GB MUSHKIN REDLINE RIDGEBACK RED 2133 7-11-7-27 1.65v, fast as hell ram but 3x2kit

2x4GB GSKILL SNIPER sorry to say crap...tight as hell

2x2GB GSKILL ECHO low volts 1,35 1600 CL7 very good RAM they can go to 2000 and lower timmings but 2x2 kit, at least what i could get

2x4GB Samsungs (reason of this thread) awesome for X79, as for my chipset wont do 2133 9-10-9-27 at least on the volts i tried i dont want to break this nice ram, but will do 2133 plain CL10 1T on 16GB, cheap and fast an cold RAM for not having HS

all this was tested to be stable on my MIVE
Cheers to all
Sergio

[BeepBeep2]

Are you sure about that? Because I can't find anywhere any stability test with those settings with any platform.

I don't consider a SuperPi test neither near or similar to a stability test because it is not.

GSKill used to sell 2133 9-10-9 kits...

[Punisher!]

GSKill used to sell 2133 9-10-9 kits...

Not 2x4gb!!

[Punisher!]

Package is on its "transatlantic transfer", lovely words!

[3lfk1ng]

At least it is not on a canoe.

I had a major setback in my build that required the purchase of a different case. I may not have a finished computer until the end of this month. Then I can post some results on my end.

[andressergio]

GSKill used to sell 2133 9-10-9 kits...

not on 2x4 beep and now they cost a lot ! u can do that easy on patriots and 2x4 but 9-11-9

[Punisher!]

not on 2x4 beep and now they cost a lot ! u can do that easy on patriots and 2x4 but 9-11-9

Abressergio max stable clock with 9-9-9-25-34? (with both, Patriot and Samsung)

[andressergio]

Andressergio max stable clock with 9-9-9-25-34? (with both, Patriot and Samsung)

less than 2000 on the samsungs and patriots wont do plain timmings just 9-11-9-27 1T i never test under 2000 as i want more than that lol

[Cecil]

The 10-10-10 should be better then 9-11-9, I did 8-8-8 vs 7-9-7 testing before at 1900Mhz.
7-9-7 vs 8-8-8 (all testing done @ DDR3-1900Mhz, i7-920 @ 4Ghz no HT, dual channel)

Best Spi 1m with 8-8-8
10.218s
Best Spi 1m with 7-9-7
10.234s
Average Spi 1m (average of 4 runs) with 8-8-8
10.245s
Average Spi 1m (average of 4 runs) with 7-9-7
10.264s

Best Spi 32m with 8-8-8
9:43.004
Best Spi 32m with 7-9-7
10.01.288

[OC Nub]

@ Punisher, I would guess that these are all Hynix below. Same exact timings as the 2 4x4gb kits I have for x79, both kits Ive tried will do 2133 9-10-9.
This kit is rated 9-10-9-28, just not GSkill. http://www.newegg.com/Product/Produc...82E16820144548


http://www.newegg.com/Product/Produc...82E16820226199
http://www.newegg.com/Product/Produc...82E16820231518
http://www.newegg.com/Product/Produc...82E16820231476

[andressergio]

Abressergio max stable clock with 9-9-9-25-34? (with both, Patriot and Samsung)

should be andressergio

i barely test under 2000 Punisher as i want more than that, i explained what i was searching and then i learnt the bad way, either way i will put them back and test some timmings

[Cecil]

@ Punisher, I would guess that these are all Hynix below. Same exact timings as the 2 4x4gb kits I have for x79, both kits Ive tried will do 2133 9-10-9.
This kit is rated 9-10-9-28, just not GSkill. http://www.newegg.com/Product/Produc...82E16820144548


http://www.newegg.com/Product/Produc...82E16820226199
http://www.newegg.com/Product/Produc...82E16820231518
http://www.newegg.com/Product/Produc...82E16820231476

I just got the 1333 7-7-7 1.5V RipjawsX kit that was supposed to be BFRs, and the ICs say F139V8CR942R. December 2011 build.

[andressergio]

I just got the 1333 7-7-7 1.5V RipjawsX kit that was supposed to be BFRs, and the ICs say F139V8CR942R. December 2011 build.

Cecil Gskill ECHO would do 1600 CL7 easy at CL7 i dont get the point of 1333 ?

[Cecil]

Cecil Gskill ECHO would do 1600 CL7 easy at CL7 i dont get the point of 1333 ?

Gskill ECOs are 2GB dimms, not 4GB. There were reports of the RipjawsX 1333 7-7-7 kit being Hynix BFR and they were only $48 so I took a risk on them, and they arent. Just tried them in my Z68 at 1866 9-10-9 1.55V and they wouldnt post. I run daily with four 2GB PSC dimms at 1866 8-9-8 1.55V, so Ill probably just pick another couple of those sets up.

[BeepBeep2]

not on 2x4 beep and now they cost a lot ! u can do that easy on patriots and 2x4 but 9-11-9

I thought they did, I guess I was wrong.

Geil has a 9-10-9 kit, and I know a lot of guys with these high end Hynix kits were able to push 2133 9-10-9+
http://www.newegg.com/Product/Produc...82E16820144548

[Punisher!]

I thought they did, I guess I was wrong.

Geil has a 9-10-9 kit, and I know a lot of guys with these high end Hynix kits were able to push 2133 9-10-9+
http://www.newegg.com/Product/Produc...82E16820144548

There must be a mistake in Newegg page. Those GeIL EVO Corsa were thought to be 9-10-9 but actually they are 9-11-9.

That kit is actually 9-11-9, as reported in the official website, here ( http://www.geil.com.tw/products/showSpec/id/315 ):

DDR3 2133MHz CAS9 & CAS10 & CAS11 Dual Channel

- Available in 4GB(2GBx2) & 8GB(4GBx2) Dual Channel Package
- Available CAS: 9-11-9-28, etc.

Also, look @ the kit:

8GB2133C9ADC is the most enthusiast one and has 9-11-9!

More Overclocking Fun

As some of the reviewers at the Shrimps still love to push things we tried to get TRCD stable at 10 iso 11. Trying to get the same performance as the higher specced 9-10-9-28 kit. That's what most overclockers started off with : pushing your hardware up to at least the specs of that hardware piece you just couldn't afford. At least I did lol.
Our entire test suite was stable with 9-10-9-27 1T at 1.74Vdimm, sadly it failed the memtest torture test. So sadly no inclusion of them results in this review. Below is a SuperPi 32M shot to show you we are not faking.


Read more: http://www.madshrimps.be/articles/ar...#ixzz1igEIqSZK

So, if you know so many, why not linking some screenshots?

[andressergio]

I thought they did, I guess I was wrong.

Geil has a 9-10-9 kit, and I know a lot of guys with these high end Hynix kits were able to push 2133 9-10-9+
http://www.newegg.com/Product/Produc...82E16820144548

either way beep this are the best + cheap kits if you want to do 2133 CL9/CL10 and push them up on 16GB

the patriots and the sammys

[BeepBeep2]

There must be a mistake in Newegg page. Those GeIL EVO Corsa were thought to be 9-10-9 but actually they are 9-11-9.

That kit is actually 9-11-9, as reported in the official website, here ( http://www.geil.com.tw/products/showSpec/id/315 ):



Also, look @ the kit:

8GB2133C9ADC is the most enthusiast one and has 9-11-9!




So, if you know so many, why not linking some screenshots?

Why the attitude? Why do internet forums always have to do with proving someone wrong at all costs

Geil EVO Corsa were thought to be 9-10-9, but actually were 9-11-9 correct. However, the 9-11-9 kit is labeled "ADC" and the REAL 9-10-9 kit is labeled DC. The DC kit came later and is not listed on GEIL's website, which rarely gets updated.

I'm not stupid, both kits are listed on newegg and the 9-10-9 kit is really 9-10-9, also pricier.

I'll hunt up screenshots when I have the time, later.

@andressergio
These are the best kits if you want to do 2133 10-10-10 at cheap prices, however there are kits that will do 9-10-9 around $80 too. These don't have heatspreaders as well...so they are the best low height modules. Team LV series is rated 2133 10-10-10 for $80 with a beefy HS for those that want better cooling...