Sorry for my english
LL A77F - Asus Rampage V Extreme - 5930K - Corsair Platinum 4x4Go 3000 C15 - Zotac 770 - SSD Samsung 850 Pro & 830
Pump D5 with mod Bitspower - EK Supremacy - Koolance GTX680 - HW Labs SR1 280 & EK XTX 360
tistou 77 its the post time that is long not the Boot time. Post time is nothing to do with drivers and yes if you change the backplate which is included with the R4E you can use any 1366 cooler. Your EK block will fit perfectly with this backplate.
ASUS M4E
2600K @5.1 24/7, 1.45v
8GB G.Skill RipJaw 2133mhz
580 GTX Tri SLI @925, 2400
Silverstone Strider 1500w
OCZ AGility Raid 0 OS, Corsair GT's Raid 0 for data.
Win 7 64 Bit Sp1
ASUS R4E
3690x 5.125 24/7 0901 or 0083b
32GB G.Skill Ripjawz 2133mhz cas 9 or 2333mhz cas 10 or 16gb 2400mhz cas 9
580 GTX Tri SLI @925, 2400
Silverstone Strider 1500w
OCZ AGility Raid 0 OS, Corsair GT's Raid 0 for data.
Win 7 64 Bit sp1
"Only the strong will survive!" -Pazza316 when commenting on training with him!!
Sorry for my english
LL A77F - Asus Rampage V Extreme - 5930K - Corsair Platinum 4x4Go 3000 C15 - Zotac 770 - SSD Samsung 850 Pro & 830
Pump D5 with mod Bitspower - EK Supremacy - Koolance GTX680 - HW Labs SR1 280 & EK XTX 360
You dont need photos mate its the same. That block and mounting system work fine.
ASUS M4E
2600K @5.1 24/7, 1.45v
8GB G.Skill RipJaw 2133mhz
580 GTX Tri SLI @925, 2400
Silverstone Strider 1500w
OCZ AGility Raid 0 OS, Corsair GT's Raid 0 for data.
Win 7 64 Bit Sp1
ASUS R4E
3690x 5.125 24/7 0901 or 0083b
32GB G.Skill Ripjawz 2133mhz cas 9 or 2333mhz cas 10 or 16gb 2400mhz cas 9
580 GTX Tri SLI @925, 2400
Silverstone Strider 1500w
OCZ AGility Raid 0 OS, Corsair GT's Raid 0 for data.
Win 7 64 Bit sp1
"Only the strong will survive!" -Pazza316 when commenting on training with him!!
Asus Rampage IV Extreme
Intel Core i7-3960X 3.3Ghz (#3133B429)
@4500.05 MHz (air) /4624.98 MHz (air) /4699.92 MHz (H80) /4800.05 MHz (H80)
Corsair Memory 16GB (4x4GB) Vengeance 1600 Mhz 1.5v
Gigabyte GV-N580UD-15I @920Mhz (SLI)
OCZ Vertex 3 SATA III 2.5" SSD 120 GB (Win7)
OCZ Vertex 2 SATA II 2.5" SSD 120 GB (Linux)
Corsair Hydro Series™ H80 & AP-14 (x2) (now shopping for LC gear)
Corsair AX1200 PSU
SilverStone Raven RV02W-EW
For those who want to WC the motherboard.
http://www.koolance.com/water-coolin...roduct_id=1227
![]()
BTTB - Gigabyte Z87X-OC - WCed I7 4770k - 2x8gb Ballistix 1600mhz - Zotac GTX 780
Asus Xonar Pheobus - OS -> Toshiba Q 256gb - Games -> 2x Agility 4 256gb Raid0
Corsair HX850 - Tecnofront HWD BenchTable - Asus VE278Q 5760x1080
Serveur - Asus Z77m PRO - 2500K - NH-C12P - 4x4gb G.Skill Ares 1600mhz
Agility 4 128gb - Corsair CX430M - 1TB Black - 2TB green - 2TB Red
KatPat - Gigabyte 990FXA-UD3 - FX-8320 - PH-TC14CS - 2x4gb Viper 1600mhz - GTS 450
Samsung Evo 120gb - Corsair HX750 - Bitfenix Survivor White - Asus VE247H
Although I wasn't to worried at all about the boot time (post time) myself, I decided to disable the BT and unused ASMedia controller (as suggested above), and my boot time is greatly reduced. Warm boots fly by in a matter of seconds, and the cold boot time is cut nearly in half. Also disabling non-bootable drives under the Boot menu helps. Something to look into for those not using these onboard devices and wanting to speed up the boot time.
9900k @ 5.1Ghz
Asus Maximus Hero XI
32GB (8 x 4) Gskill @4000
Strix 2080 Ti OC
OS & Apps: Samsung 970 Pro 512GB
Games: Samsung 970 Pro 1TB
Storage: Crucial M500 2TB
Seasonic Platinum 1000W
Phanteks Evolv X
/Sarcastic mode on.
Jack: "Hey Bob, let's do a high-end motherboard for Quad-SLI, but let's change the usual molex EZ-plug we usually put on those motherboards to a 6-pins PCIe connector, so no one will be able to use it, since all the high-end PSUs on the market only have 8 PCIe cables max. Let's make a Quad-SLI motherboard, but be sure that no one can't use it without the proper adaptor, since they will only have 8 PCIe cables, but will need 9!''
Bob: ''Ok, great idea! So we will be sure that they will go crazy trying to find a stupid 2 Molex to 6-pins PCIe that no one is making anymore! Or wait 2 weeks to get one with the great couriers out there. And be sure NOT to put one of those 0.99$ connectors in the motherboard box, and let's put alot of useless junk with it instead!''
Last edited by Levesque; 12-08-2011 at 07:46 AM.
i7 3930k EK-Supreme HF - Asus Rampage IV X79 - QUAD-Fire: 4X Asus 7970 EK waterblocks - 4X4GB=16GB RipjawsZ 2400 CL9 - Crucial C300 128Gb M4 128Gb 2x Intel X25-M 160GB 3X Seagate 2TB - Mountain Mods Extended Ascension + Pedestal 24 - Dual-PSU: Antec HCP-1200 + Corsair AX850 - EyeFinity 3X 30'' LCD - Windows 7 64
LMFAO! Although I think for their logic is that, most people that will be running quad fire will be using 2 PSU's or have the necessary cables and what not to take advantage of that 6 pin power. All in all, this is a board designed for extreme benchers as well as top enthusiasts. If not why not just get the Formula, apart from the lack of 8 DIMM's
Project Elegant Dreams
CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
Sound:Asus Xonar Xense w/Sennheiser PC350
SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,
Water Cooling
Main Loop
EK Supreme HF
EK GTX480 blocks on EVGA 580s
MCP355 and MCP35X in serial
Dual BlackIce GTX480 Rads
You mean the molex to 6 pin that is $3 at any computer store? Who is going to bench 4x 580 with 1 PSU anyway? Seems like you are grasping at straws for something to complain about..
MB Reviewer for HWC
Team OCX Bench Team
Anyone testet the x-socket ?
RIG 1:[Intel® Core i7-3960X Extreme][Asus Rampage IV Extreme][16GB G.Skill RipjawsZ ][AMD HD 7970 CF][Corsair AX 1200W][Corsair Obsidian 800D][Custom Watercooling][Dell U2711)
RIG 2:[Intel® Core i7-990X Extreme @4.6Ghz][Evga X58 Classified 760][12Gb Muskin Redline][EVGA GTX 580SLI][TT TP1200W][Lian Li V2000BPLUSII] [Custom Watercooling][Dell U2711]
RIG 3:[Intel® Core i7-2600K@4.4Ghz][ASUS P8H67 B3][8 GB Corsair Vengeance] [Evga GTX 570SLI][Corsair AX 850W][Lian Li V2000BPLUSII][Corsair H70][Custom Watercooling][Dell 2407wfp]
RIG 4:[Intel® Core 2 QX9650 Extreme @4.0Ghz][ASUS P5E3 PRO INTEL X48 ][8GB Muskin Redline][MSI GTX 470][Corsair AX 850W][Lian Li V2000BPLUSII][Custom Watercooling][Dell 2407wfp]
Yes. The change of socket works fine. I have tested it with Koolance 370 waterblock and 1366 backplate.
ASUS M4E
2600K @5.1 24/7, 1.45v
8GB G.Skill RipJaw 2133mhz
580 GTX Tri SLI @925, 2400
Silverstone Strider 1500w
OCZ AGility Raid 0 OS, Corsair GT's Raid 0 for data.
Win 7 64 Bit Sp1
ASUS R4E
3690x 5.125 24/7 0901 or 0083b
32GB G.Skill Ripjawz 2133mhz cas 9 or 2333mhz cas 10 or 16gb 2400mhz cas 9
580 GTX Tri SLI @925, 2400
Silverstone Strider 1500w
OCZ AGility Raid 0 OS, Corsair GT's Raid 0 for data.
Win 7 64 Bit sp1
"Only the strong will survive!" -Pazza316 when commenting on training with him!!
Yep, have a look here: http://www.hardwarecanucks.com/forum...review-10.html
Pretty much anything 1366 that has a backplate will be fine.
MB Reviewer for HWC
Team OCX Bench Team
Thank you.![]()
So my EK-Supreme HF should work just fine then?
RIG 1:[Intel® Core i7-3960X Extreme][Asus Rampage IV Extreme][16GB G.Skill RipjawsZ ][AMD HD 7970 CF][Corsair AX 1200W][Corsair Obsidian 800D][Custom Watercooling][Dell U2711)
RIG 2:[Intel® Core i7-990X Extreme @4.6Ghz][Evga X58 Classified 760][12Gb Muskin Redline][EVGA GTX 580SLI][TT TP1200W][Lian Li V2000BPLUSII] [Custom Watercooling][Dell U2711]
RIG 3:[Intel® Core i7-2600K@4.4Ghz][ASUS P8H67 B3][8 GB Corsair Vengeance] [Evga GTX 570SLI][Corsair AX 850W][Lian Li V2000BPLUSII][Corsair H70][Custom Watercooling][Dell 2407wfp]
RIG 4:[Intel® Core 2 QX9650 Extreme @4.0Ghz][ASUS P5E3 PRO INTEL X48 ][8GB Muskin Redline][MSI GTX 470][Corsair AX 850W][Lian Li V2000BPLUSII][Custom Watercooling][Dell 2407wfp]
[XC] gomeler - Public note: If you PM me to tell me that I am disrespectful at least have space in your PM box so I can tell you I don't care.
[XC] gomeler - I come to the news section to ban people, not read complaints.
I heart gomeler!
About the OC, are different Vcore (offset)?
there is a delta Vcore/vscca? (as 1366 and Vdimm/vQPI)
compared to 1366, the OC is different?
thanks![]()
Sorry for my english
LL A77F - Asus Rampage V Extreme - 5930K - Corsair Platinum 4x4Go 3000 C15 - Zotac 770 - SSD Samsung 850 Pro & 830
Pump D5 with mod Bitspower - EK Supremacy - Koolance GTX680 - HW Labs SR1 280 & EK XTX 360
When you live up north of the 49th parallel, already under 3 feet of snow, with the nearest computer stores at 8 hours from my place... finding a stupid adaptor like that can be annoying. B.O. everywhere I ordered it in Canada. 3 are stucked at the US/Canada border for 3 weeks now (Christmas time...), coming from USA stores. And I fried 2 PSUs trying to use dual-PSU.
Call me stupid, noob, etc I don't care, but after getting 1 dead AX1200 and 1 DOA HCP-1200, I'm grasping at straws now, yes.They could have put that 3$ adapter in the box.
And for Quad-Fire 4X6970 Lightnings, I don't need to use a dual-PSU set-up. A single HCP-1200 is plenty enough. But only 8 PCIe cables. Need 9.![]()
i7 3930k EK-Supreme HF - Asus Rampage IV X79 - QUAD-Fire: 4X Asus 7970 EK waterblocks - 4X4GB=16GB RipjawsZ 2400 CL9 - Crucial C300 128Gb M4 128Gb 2x Intel X25-M 160GB 3X Seagate 2TB - Mountain Mods Extended Ascension + Pedestal 24 - Dual-PSU: Antec HCP-1200 + Corsair AX850 - EyeFinity 3X 30'' LCD - Windows 7 64
I think my board has just died for no reason.... was playing a game and it suddenly goes off, not even BSOD, just off. Now when i turn it on, the board LED lights stay off including the error codes, everything else stays off (no fans come on apart from the fan on the board itself) theres no post screen or any kind of activity. Only things that work on the board are the lights for the power and reset buttons. When i press the power button only the boards fan spins, nothing else at all.
Tried ressetting CMOS and removing the battery on the board but that dont help.
What else could i do? I'm about to try my PSU, cards and memory in another board, to make sure they're ok, but it's looking like it's the board itself. Even if the CPU was dead (which i very much doubt because it was only at 4.4GHz at the time and temps were well well 60c) the board would still show activity on the lights and the error code would display.
Last edited by Photek; 12-09-2011 at 07:13 AM.
i7 3930K @ 4.54GHz
Rampage IV Extreme
32GB @ 2152MHz
2x Crossfire 6970's
2x Corsair C300 SSD's in RAID
3x 2TB storage
Water cooling with triple rad
HP 30" ZR30W + Dell 30" 3008
Seems that it's the PSU...
I connected it to another board... same thing happens. Well thats kind of a releif i supposeany recommendations for a new PSU? It needs to be beefy, like around 1200w preferably. The one thats just died was a Thermaltake toughpower 1200w... what a POS!
i7 3930K @ 4.54GHz
Rampage IV Extreme
32GB @ 2152MHz
2x Crossfire 6970's
2x Corsair C300 SSD's in RAID
3x 2TB storage
Water cooling with triple rad
HP 30" ZR30W + Dell 30" 3008
LOL! thermaltake PSU's, they've been known to alot of people to avoid. That being said, the AX1200w fits most peoples bill quite well, I personally run that myself. Or if you can, get your hands on the SeaSonic 1000W 80+ platinum, great voltage regulation on that psu, given that you also have some sort of power conditioner as the ripple suppression isn't as great compared to the AX1200.
Project Elegant Dreams
CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
Sound:Asus Xonar Xense w/Sennheiser PC350
SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,
Water Cooling
Main Loop
EK Supreme HF
EK GTX480 blocks on EVGA 580s
MCP355 and MCP35X in serial
Dual BlackIce GTX480 Rads
Playing around with max oc, this is about all I am able to do on water. I guess it will need cold to go any higher.
Ill try with turbov evo later and see if it can go higher in windows.
http://valid.canardpc.com/show_oc.php?id=2140528
Last edited by OC Nub; 12-09-2011 at 05:15 PM.
I have problem loading memtweakit it just minimize into my taskbar.
btw, I'm on win7 x64, bios 0901
@ OC Nub
nice! yep i believe it need some cold to go higher... my 3930K can post at 55X but will stuck at win logon
SUCCESSFUL TRADE LIST RM600k+
^^ Malaysia's Overclocking Enthusiast Community Website ^^
Find us at Facebook HERE
XS Successful Trades:
G.Skill RipjawsZ 2400C9 4X4GB - sold to easegantini | G.Skill RipjawsX 2133C8 2X2GB - bought from Dumo | 2600K 57X - bought from newhit | 3770K 6750 - bought from Viss | 3770K 6750 - sold to Sniper | 3770K IMC 2800+ - bought from Dumo | G.Skill Pi 2200C7 - bought from websmile | 3770K IMC 2933+ - bought from Viss | DomGT 2kC7 3X2GB - sold to _AntLionBR_ | G.Skill Pi 2133C8 - bought from websmile | DomP 2800C11 - bought from Alex-Ro | Pi 2000C7 - bought from websmile | GTX4 + KVR 1333C9 - bought from TaPaKaH
Thanks.
Havent used memtweakit, but it seems to open ok here.
Anything above this freq. hangs at windows login. Maybe software can get it higher.
Bookmarks