Quote Originally Posted by Nsidious9 View Post
I didn't take into consideration that since I am using 8 dimms instead of 4, that I should up the voltage on the memory. I'll see if that is the issue. Then, I will update the bios to the newest. I am sure that's what the issue is for now.
I also had all 8 RAM slots filled and the board was unstable, even though the memory was NOT faulty. So try running with just 4 or 2 sticks installed.
For me sometimes it wouldn't post and gave some error code but i just thought it was because i had the board overclocked, then i discovered it also did this on default settings. I also had trouble installing or booting Windows on a RAID array and now i think it was the memory. If more than 4 RAM slots are filled then the system becomes unstable.

In the end i got my board running ok with all 8 dimms (32GB) by doing the OPPOSITE of what you normally would do... i tightened the memory timings to 9-11-10-28 and set the memory voltage LOWER to 1.6v. Default auto settings were 11-11-11-28 and 1.67v yet these didn't work. The latest BIOS (0901) dont fix this problem either.

The settings for memory timings and voltage are under the first tab in the BIOS. But try it with less RAM installed first and if it's ok then you might have this same problem...