i5-2500K/2600K batch number and o/c results

[erikmorgan]

Yes that looks promising. You may just have a keeper there. What cooling?

Corsair H70, stock fans, running on high. Nothing went above 62 deg. during the test and benches. I need to spend more time learning how to o/c and try my hand at doing it manually.

Any pointers?

[LagunaX]

Looks good so far go for 4.6-4.8ghz and we'll see.
Give prime95 x64 a try too- I've have had chips pass IBT/linX and BSOD before but none so far after passing prime95 testing.

[badatgames18]

forgot the batch of this one.. i think it was 310XCXXX


this is my max benching clock (convenient since i can run 2200mhz on mem)

for max clock i can get to xp screen up to 59x.. bsod quickly though and i couldn't validate in time

i bin only using 1.56v so i will try more volts later, but i don't want to degrade this since i have no more money to buy chips with
i also tried 6ghz for fun 58x, 103.4.. no blinking dash line, and bsod with page pool error

what do you guys think? more volts+ something colder than phase? i really really don't want to degrade this

[Dumo]

Nice one Bad, congrats

My 58X unstable @ less than 1.63V on phase, mostly 4C/4T all 3Ds up to 5840Mhz.

4C/8T vantage/wprime only @ 5705Mhz max. with any Vcore

If you passed 5805Mhz then it will be either 5850Mhz max or 5899Mhz max...some can go 5900+ with LN2 and 1.68V/1.7V

[badatgames18]

Nice one Bad, congrats

My 58X unstable @ less than 1.63V on phase, mostly 4C/4T all 3Ds up to 5840Mhz. Wprime, vantage

4C/8T vantage/wprime only @ 5705Mhz max. with any Vcore

If you passed 5805Mhz then it will be either 5830 max or 5899 max...some can go 5900 with LN2 and 1.68V

thanks dumo!
i need a dewar and hopefully i can get higher for benching..
i got into os with 1.64v 5.9ghz 58multi and 101.8blck.. didn't run anything though, evap was getting almost bellow -40C and i think cpu was way hotter.

i think i'll do 5.8 for now.. 103.66blck seems to be the sweet spot for me in terms of memory frequency

need ln2

EDIT: batch number is: 3102C314
sn:0832

[flesheatinvirus]

Corsair H70, stock fans, running on high. Nothing went above 62 deg. during the test and benches. I need to spend more time learning how to o/c and try my hand at doing it manually.

Any pointers?

It is all here in this thread just dig around. There is a ton of good info on the 3 series. You want to test for high Multi so reduce ram divider speed a notch to eliminate that then set cpu vcore to maybe 1.35v QPI/VTT to 1.100v Sys agent to 0.923v leave PCH alone for now as well as cpu PLL, set ram vcore and start raising the multi with quick tests for stability. Cinebench R11.5 is great because its fast and pounds the cpu rather well showing faults rather quick. Increase vcore on the cpu as needed in baby steps and watch cpu temps like a hawk.

[flesheatinvirus]

Killa chip you have there Bada, one of the highest I have seen. Very nice work. Someone please give him a pair of water blocked 580 classi cards already.

[l0ud_sil3nc3]

very sick chip bad

seems that the costa rica c batches are the way to go. . .



this was a little suicide run but I won't run any benches at those clocks/volts since I am only under water.

[Gaul]

[badatgames18]

very sick chip bad

seems that the costa rica c batches are the way to go. . .



this was a little suicide run but I won't run any benches at those clocks/volts since I am only under water.

thanks .. also you have a very nice chip there yourself!
do you remember what the specific batch of that was?

i found another 310CXXX on craigslist... these seem to be averaging at least 54X
i'm wondering if i should gamble and sell one of my video cards and buy it lol

wow very low volts gaul..looks like you're on air?
try for max multi yet?

[aussie-revhead]

wow those are great, it makes me want to go try a new cpu again .... Im getting a single stage too, would 1/4Hp Kayl unit be enough? Or a Prommy? I found one of each for sale, I also found a 1/2HP Kayl but its too dear for me.

Are these new good cpus with rounded corners on IHS or sharp corners? Or no pattern with this either?

Is a Gene-Z a good board? If I set up a benching board with SS then would this be a decent choice?

BTW Im out of touch with the news but when are SB-E and X79 due out?

[aussie-revhead]

OK 1/3HP Kayl SS on the way ....

Badatgames - your a lucky bugger with your cpus .....

[celerity]

A friend of mine (FedtTony) got these results with 2500K (313XBXXX) w. Asus P8P67 PRO B3:



I'm quite sure he can get more out of it

[flesheatinvirus]

Looks like another keeper, nice chip.

[badatgames18]

anyone find golden 2700k yet?

[Dumo]

@ Bad...Tried 7 so far and 55X top, might as well go 3960X

[flesheatinvirus]

I would skip the 2700 also, 3960 could provide some fun though.

[l0ud_sil3nc3]

@ Bad...Tried 7 so far and 55X top, might as well go 3960X

3960X is all ready in stock at some Microcenters, I am just wondering who is going to have the RIVE in stock first

[noobzed]

Hi, have some ca$h to spend, WTB low voltage CPU ( 2500K 2600K 2700K ) so drop me a PM if you have something to propose, thanks for reading.

[tw33ter]

Anyone have any experience with L133C199?

[andressergio]

i really wish the 3930's do 5GHz that will be awesome

wonder who will be the first to try it

[badatgames18]

i really wish the 3930's do 5GHz that will be awesome

wonder who will be the first to try it

eva2000 will be trying it out with some hypers ...whenever they come out in AUS..
i'll be switching too as soon as they come out... but hard to choose between the rampage iv and the new gigabyte oc lol..

first one has more features, but i'm interested in which ever one oc better

[Leeghoofd]

eva2000 will be trying it out with some hypers ...

let's hope good old George has more luck then others

[andressergio]

eva2000 will be trying it out with some hypers ...whenever they come out in AUS..
i'll be switching too as soon as they come out... but hard to choose between the rampage iv and the new gigabyte oc lol..

first one has more features, but i'm interested in which ever one oc better

yeah now a big decision giga or asus...

lets hope they can do 5GHz easy and not turn hot as hell

[Hazzan]

Anyone have any experience with L133C199?

tried.....seem like good.

I have similiar with that bacth 5Ghz only need 1.35 Volt Max clock 5.785 Ghz.