i5-2500K/2600K batch number and o/c results

**badatgames18** · 10-15-2011, 02:12 PM

Originally Posted by Martin.v.r

hmm
I7 2600K COSTA RICA Bacth 3134B020
fast test whit 1.55v x56,gonna test if it will more a x56,maybe I will put something else on cooling, a water
superpi

06

one of the chips i bought from egg is very similar batch..
did you say you tried 56x? ss is showing 53 multi?

**Martin.v.r** · 10-15-2011, 02:26 PM

YES sorry
fast test on water x56

next test whit SS an 3Dmark
56.png

**flesheatinvirus** · 10-16-2011, 07:31 AM

Here is my old and dusty L040B208 2600K still kicking. A quick run of 3DM11 at 5300mhz and a run of Cinebench R11.5 at 5400mhz I did this morning.

**Shrekogre** · 10-17-2011, 04:06 AM

after testing a few cpu, I find that on air/water and sub zero is different. I almost sold my 5.3ghz on air but unexpectedly the cpu did 5.78ghz on ln2

**Ace.** · 10-21-2011, 08:58 AM

2500K Batch L132B475

further results follow

**Olivon** · 10-21-2011, 09:23 AM

Impressive !

**kagula323** · 10-21-2011, 11:51 AM

Originally Posted by Ace.

2500K Batch L132B475

further results follow

verry nice cpu
what about max multi and frequency?

**Ace.** · 10-21-2011, 01:17 PM

5455 is max. boot

5.4Ghz boot with 1.45 Vcore

**badatgames18** · 10-21-2011, 01:45 PM

batch: 3134B173
max multi: 53
max mhz.. seemed like 5300

cooling was under SS -47 to -44 on evap

**LagunaX** · 10-21-2011, 04:12 PM

Very nice daily chip Ace!

**Cecil** · 10-22-2011, 10:41 PM

I just bought a 3113Bxx 2500K that so far is running LinX AVX at 4.6Ghz with 1.24V under load. Once I find the max, Ill post all the details. Seems like a great low volt clocking chip so far.

**Cecil** · 10-23-2011, 03:34 PM

3113B776 2500K
Gig Z68X-UD3H-B3 1.3
H60
2x2Gb Gskill RipjawsX 1600 7-8-7-20 1.5V
1.36V in BIOS with Lvl5 LLC, 1.404V idle, 1.332V load.
Auto for rest of voltage accept PLL undervolt to 1.6, and Vdimm at 1.515V.

http://i56.tinypic.com/2yzmwhx.jpg

**badatgames18** · 10-23-2011, 04:09 PM

hi cecil.. that is not your max multi is it?

nice clock

**aussie-revhead** · 10-23-2011, 06:25 PM

I just bought my first 2500K to try and its a lemon ..... it needs 1.55v to boot at 5ghz and its not even stable .....

**Dumo** · 10-23-2011, 06:28 PM

2700Ks coming up

**aussie-revhead** · 10-23-2011, 07:07 PM

Will they be binned 2600K?

**Dumo** · 10-24-2011, 12:49 PM

Originally Posted by aussie-revhead

Will they be binned 2600K?

I will find out soon

Imo, it will be a little higher average max multi than 2600K...probly average 54X/55X?

I have to admit though that BD FX chip is more fun to oc

It took me longer to find its sweet spot with non LN2 cooling (and its still scaling up with more cold) whereas SB only took 15 minutes to find its max Mhz. Lol

**Cecil** · 10-24-2011, 01:18 PM

Originally Posted by badatgames18

hi cecil.. that is not your max multi is it?

nice clock

Nope, was just looking for best daily stable with lowest voltage. It is an HTPC after all lol.
Might check for max multi at some point, but right now I just have an H60 on it, and wont be benching this PC at all.

**badatgames18** · 10-24-2011, 03:02 PM

batch 3115B564
max multi 52
max clock 5252mhz

man.. 4 31XXXB and all aren't that good... 52, 52,52,53

martin you got lucky man.. with that 56x

**flesheatinvirus** · 10-24-2011, 03:33 PM

It is certainly not like the early days of Sandy.

**Cecil** · 10-24-2011, 06:26 PM

Originally Posted by badatgames18

batch 3115B564
max multi 52
max clock 5252mhz

man.. 4 31XXXB and all aren't that good... 52, 52,52,53

martin you got lucky man.. with that 56x

I havent had cooling to test a max multi, but Im on my 4th 2500K, and this one is best for clock/voltage scaling. The first one did 5 stable but needed a ton of volts and was best ran at 4.5 1.35v. The second really only could do 4.4 with 1.35. The new C batch I got did 4.6 with 1.35. My 3113B can do 4.8 with 1.33V. So Id say the newer ones are doing better daily, but not as well for benching.

**l0ud_sil3nc3** · 10-24-2011, 10:21 PM

I have gotten two x55 and a x57 from Costa Rica, and only one x55 from Malaysia, and I would agree with the newer chips being better than the old ones.

**aussie-revhead** · 10-24-2011, 10:36 PM

Can any of you guys bench 56x on water? I have a cpu that does 56x with wall at 5650 but I cant get it 3D stable at anthing over 5250-5300, it requires alot of juice to do that too - 1.65-1.7v - do you think cold will help? Is the chip stuffed? It was as well have a wall at 5300 since I cant use the 56x anyway (except for SuperPi)...

**Dumo** · 10-24-2011, 10:49 PM

Based on my personal binning experience, 30+ pcs. 2600Ks yielded (1) 58X when stick with good known batch/es (luck factor excluded)...Hopefully it will take less with 2700K

Originally Posted by aussie-revhead

Can any of you guys bench 56x on water? I have a cpu that does 56x with wall at 5650 but I cant get it 3D stable at anthing over 5250-5300, it requires alot of juice to do that too - 1.65-1.7v - do you think cold will help? Is the chip stuffed? It was as well have a wall at 5300 since I cant use the 56x anyway (except for SuperPi)...

If its wall @ 5650 Mhz then definitely you can bench (with cold) @ 5630ish at least with 4C/4T

**aussie-revhead** · 10-24-2011, 11:02 PM

5650 was with 4c/8t too, I tried disabling and didnt get any more out of it.

What rams are you guys using for C7 at high clocks?

Thread: i5-2500K/2600K batch number and o/c results

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions