Gskill F3-17000CL8-D

**badatgames18** · 10-06-2011, 03:24 AM

loud you are scoring alot better than me on the last post, was that win7?

i guess 100Mhz on cpu and better tRAS makes a difference?
i bought these for 40 dollars

tRFC was @ 95 iirc

**l0ud_sil3nc3** · 10-06-2011, 11:36 AM

Originally Posted by badatgames18

loud you are scoring alot better than me on the last post, was that win7?

i guess 100Mhz on cpu and better tRAS makes a difference?
i bought these for 40 dollars

tRFC was @ 95 iirc

for me 6-9-6 was slower than 7-9-6 until I figured out the correct subs.

that was W7 x64 with a few tweaks, I need to stop being lazy and install XP

**owikh84** · 10-06-2011, 02:31 PM

Originally Posted by Dumo

Memory C...http://www.memoryc.com/computermemor...alchannel.html

Thanks! now I'm ready for quad channel hehe

**Dumo** · 10-06-2011, 04:23 PM

@ Owikh...You're all set for SB-E

**sin0822** · 10-06-2011, 04:48 PM

nice, its always good to be ready for X79!!!!! I am so excited!

**owikh84** · 10-06-2011, 08:09 PM

Originally Posted by Dumo

@ Owikh...You're all set for SB-E

Originally Posted by sin0822

nice, its always good to be ready for X79!!!!! I am so excited!

Yes i'm preparing for this new platform.
Now just waiting for CPU & x79 mobo

**websmile** · 10-07-2011, 12:35 AM

Then I hope you are lucky and get same ICs on the new kit as you have on the old ones, if not you will have to improvize

/ same SPD etc is overrated in my opinion anyways^^- same ics are sufficient

**The Stilt** · 10-07-2011, 05:46 AM

Hoard up all of the PSC you can find.
The prices are going to bounce once BD is out

**owikh84** · 10-07-2011, 07:49 AM

Playing with my old sticks...

2600K @ 5.6GHz
2175.66MHz 6-9-6-20-1T

**l0ud_sil3nc3** · 10-07-2011, 09:32 AM

Originally Posted by owikh84

Playing with my old sticks...

2600K @ 5.6GHz
2175.66MHz 6-9-6-20-1T

very beast, that is looking really nice

I just got my new sticks in, but no time to play with them today

**l0ud_sil3nc3** · 10-07-2011, 09:57 AM

2600k @ 5.7GHz
2222 7-9-6-20-1T
all on water, directly booted from the bios.

**Dumo** · 10-07-2011, 11:25 AM

Awesome clocks there guys

Now save those rams for 2700K or FX8150

**ZenEffect** · 10-07-2011, 06:25 PM

this is sort of unrelated... Im doing a little pre-testing right now for the before trying more. ive finally figured out how to run the z68xp-ud4 with higher bclk... turns out i was overcomplicating the issue. so far, bclk has exceeded what was capable on the p8p67-pro using the same chip and memory.

see what i did there?

this was on green pcb btw if anybody cares. Jan 2011 sticks.

**Hondacity** · 10-07-2011, 06:28 PM

that is abuse! try it with 4 sticks?

**ZenEffect** · 10-07-2011, 06:32 PM

cant get tighter than 8-9-8 with 4 sticks.

dont like the full blown windows 7 x64 ultimate pi? I dont either, but im tuning here because im lazy like that. i will os change and re-run "later"

**Hondacity** · 10-07-2011, 06:58 PM

efficiency/os doesn't matter, I know you got it already

**Dumo** · 10-07-2011, 10:57 PM

Originally Posted by ZenEffect

see what i did there?

this was on green pcb btw if anybody cares. Jan 2011 sticks.

Nice run there Zen

**Dumo** · 10-07-2011, 10:57 PM

It would be nice to bench 2700K at the same time FX released

**websmile** · 10-07-2011, 11:51 PM

Awesome clocks

- board will not limit you in my opinion btw, none of five boards I had did less than 107bclk, with different really bad cpus as I'm out of hwbot for a long time now and have no need to select cpus I take what I get xD. As for 4 sticks, I think we talked about this before, same with me, 8-9-8 with BBSE, better timings are not possible on various boards

**ZenEffect** · 10-08-2011, 04:42 PM

typically on air my cpu can only do 104.2 bclk on both asus boards i have and the ud7. z68xp-ud4 ive already passed 106.1 which is .2 higher than what i could achieve on asus while cold... though i need to play with skew options more with m4e.

**Dumo** · 10-08-2011, 06:13 PM

Same ram and cpu max @ 108.7 BCLK with P67-UD7 and 106ish BCLK on P67-UD7 B3

Time to start prepping for 2700K, hopefully it will be easier this time around

**badatgames18** · 10-09-2011, 10:55 AM

hey guys.. i realize this might not be the place for it, but is it ok to run 1.72-1.74 vdimm 24/7 on sb?
if not then what is the max you guys recommend?

i need it for my hypers

and my bbse can hold 7-9-7-20 1T 2200MHz with 1.74v also changed tRFC and subtimings for better efficiency

**Hondacity** · 10-09-2011, 10:57 AM

for 24/7 just use the xmp, then jack up the cpu multi to something stable with 1.3volts. easy

**ZenEffect** · 10-09-2011, 11:09 AM

Originally Posted by Hondacity

for 24/7 just use the xmp, then jack up the cpu multi to something stable with 1.3volts. easy

for 24/7 i do just about the same thing. only diff is, i set cpu multi to 46x, the rest is auto. so... clear cmos, set xmp, cpu multi 46. the board takes care of the rest

then again, honda and I may be assuming too much... you are using a K processor arent you badatgames18?

**Hondacity** · 10-09-2011, 11:12 AM

smart man

and mr bad, don't enable pll overvoltage

Thread: Gskill F3-17000CL8-D

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions