i5-2500K/2600K batch number and o/c results

**flesheatinvirus** · 09-29-2011, 04:47 PM

Nice vcore on that one, what ram?

**Lauri Kiissel** · 09-30-2011, 12:03 AM

I've got my 2500K (3107B211) at x54 so far (haven't had much time for OC so far, new tests at next week). I think I kept the vcore on 1.6v, just to make it comfortable for myself and raise the multiplier each time I go to BIOS. Motherboard is Gigabyte Z68X-UD3-B3 which doesn't have very good PWM..
About 24/7 clock, it seems to run stable 4.6GHz @ only 1.3V, prime 12h stable + gaming tests.

Maybe someone has the same board and can share some tips about what to adjust and how much to adjust?

**Milamber** · 10-01-2011, 06:37 AM

2600K
Batch: 3131A765
4.6Ghz 1.34v

TBH I have no idea WTF I'm doing with SB overclocking!

Capture-1.jpg

**Gaul** · 10-03-2011, 03:13 AM

Originally Posted by flesheatinvirus

Nice vcore on that one, what ram?

thx, RAM 1600 CL 9

now try 1866 CL 9......

**Timoleros** · 10-04-2011, 01:39 PM

Hi guys!
I left the the hunting for a good 2600K after 8 crappy chips (max X53) and today i bought my third 2500K (I am more lucky with these I had 2X55)
The strange with this third chip is that with PLL overvoltage enable or disable reaches tha same frequency...(X50) is that normal?
With PLL overvoltage enable i think you can reach 5 more multi...right?

**Hondacity** · 10-04-2011, 01:45 PM

5 more multi? who told you that?

**Timoleros** · 10-04-2011, 02:02 PM

That was what i noticed to my P67-UD4...
After a quick search I found that
http://gigabytedaily.blogspot.com/20...67-boards.html

Now I have a MIVE and maybe it is not the same...

**flesheatinvirus** · 10-04-2011, 03:42 PM

PLL can certainly help with stability but in the end it comes down to the chip.

**Timoleros** · 10-04-2011, 04:20 PM

So...that chip is my worst. With more than X50 multi it freezes at windows logo.. and debug led on MIVE shows AA
2500K
Batch# L132B220
Max: X50

**Gaul** · 10-05-2011, 02:13 PM

5.4 GH

**flesheatinvirus** · 10-05-2011, 02:37 PM

Nice run there.

**biasion** · 10-06-2011, 03:48 AM

hi i have a new in package i7 2600k bacth L105A823 do you know if it is good o bad ?? thank you vincent

**@rne** · 10-06-2011, 05:48 AM

Batch imho doesn't really matter. Just test it and see for your self.
I tested 13 CPUs and i can tell you, there is no rule to judge them

**badatgames18** · 10-07-2011, 12:51 PM

batch L104A617
max multi 54
max clock seems like 5400

(can't get anymore in ai, and cannot boot from bios if >5.4 less multi)
max blck: 106.2

anyone know anything about
L134B318?
EDIT:i'll just test it

**I.nfraR.ed** · 10-07-2011, 01:05 PM

2500K - L129B673 - #1532 - 53x

Not sure about absolute max speed, but this is what I can get on air and 2 cores. 5400 is a no go and 53 is max multi.

**l0ud_sil3nc3** · 10-07-2011, 06:44 PM

2500k batch #: 3111B247
s/n: 2L052237A5302

max multi x53

**badatgames18** · 10-08-2011, 12:52 AM

batch: L134B318
max multi: 52 (eew!)

but is low voltage 1.4v 5ghz.. hopefully someone will buy this off of me

**Gaul** · 10-08-2011, 04:59 AM

25 K @ 5.5 GH

Spi 32 MB

**Shrekogre** · 10-09-2011, 11:58 PM

L120B308
59x doable on SS

Click image for larger version.

Name: 1956914.png
Views: 997
Size: 107.7 KB
ID: 121039

**badatgames18** · 10-10-2011, 12:03 AM

Originally Posted by Shrekogre

L120B308
59x doable on SS

AAaaahhhh gosh daggit! how many did you go through? i have terrible luck

**Shrekogre** · 10-10-2011, 12:09 AM

Originally Posted by badatgames18

AAaaahhhh gosh daggit! how many did you go through? i have terrible luck

I was pretty lucky with sb cpu on my last 2 purchases. On my 4th CPU, I got a almost 5.8ghz cpu, so I though I should buy another one for general use to slow down the degrading of this CPU. In the end, the new cpu I got do better. 5.9ghz is spi32m doable and I will try for 6ghz validation when I get my hands on some LN2

**badatgames18** · 10-11-2011, 05:21 PM

Originally Posted by Shrekogre

I was pretty lucky with sb cpu on my last 2 purchases. On my 4th CPU, I got a almost 5.8ghz cpu, so I though I should buy another one for general use to slow down the degrading of this CPU. In the end, the new cpu I got do better. 5.9ghz is spi32m doable and I will try for 6ghz validation when I get my hands on some LN2

my gosh.. how lucky!
best i have out of 10 2600ks overall was a 54 multi which has degraded to FUBAR.. it can't even hold 3d anymore @ 5400 when it used to be able to

got a few chips comming in... 3x2600ks from newegg and one used 2500k batch 3102C224
fingers crossed

**Martin.v.r** · 10-14-2011, 01:40 PM

hmm
I7 2600K COSTA RICA Bacth 3134B020
fast test whit 1.55v x56,gonna test if it will more a x56,maybe I will put something else on cooling, a water
superpi

06

**LeandroJVarini** · 10-15-2011, 09:35 AM

Cpu: Core i7 2600k
Batch: L046B028
Motherboard: Zotac Z68 AE
Cooler: Coolermaster V10
Clock: 4.5 GHZ
vCore= auto (1,24v runing linX)

**badatgames18** · 10-15-2011, 02:11 PM

Originally Posted by Martin.v.r

hmm
I7 2600K COSTA RICA Bacth 3134B020
fast test whit 1.55v x56,gonna test if it will more a x56,maybe I will put something else on cooling, a water
superpi

06

one of the chips i bought from egg is very similar batch..
did you say you tried 56x? ss is showing 53 multi?

Thread: i5-2500K/2600K batch number and o/c results

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions