Quote Originally Posted by franknitty69 View Post
The Aquaero has 4 fan channels and you will be able to control as many fans as you can without exceeding the each channels output and the overall Aquaero output (more than 1 fan on each channel). Each fan channel can deliver 1.65A and the maximum combined of all channels is 5A. I'm not sure what fans you are trying to use, but depending on which will determine if you can or cannot. I'm going to go out on a limb and say that 10 fans will most likely exceed the output. You will need a PowerAdjust2.

For example 3 Scythe Ultra Kaze 3000's utilize 1.8a at normal speed. You will only be able to run 2 Ultra Kaze's (1.2a) on a single channel. You may be able to run 8 Ultra Kaze's (2 per channel), but you would be approaching the XT's thermal limits.

Also, since you want to control two PMP-450's you will definitely need a PowerAdjust2.
Thanks

I will look into the power adjust 2.

The fans I will be controlling is the Gentle Typhoon 120mm Fan 1850RPM (AP-15).

So what is the different between the xt or Lt.

Also to make sure if I understand if I want to control the 2 pumps and the fans I will need the 5 alone with a power adjust 2.




Sent from my iPhone using Tapatalk