I eagerly await the benches btw i thought 265 was the max fsb for DFI boards w/o a big arse a/c unit blowing in your case what pushed ya over that
I eagerly await the benches btw i thought 265 was the max fsb for DFI boards w/o a big arse a/c unit blowing in your case what pushed ya over that
hehe... sounds nice. But I am not really willing to connect internet to it (I had to disconnect it from my inet rig, no router here)... and I dunno if the networking connection would stay alive after some heavy benches at bus clocks like these (I know sometimes my SB audigy LS fails)
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
Yeah, me tooOriginally posted by haPpydUde
I eagerly await the benches btw i thought 265 was the max fsb for DFI boards w/o a big arse a/c unit blowing in your case what pushed ya over that
But everything higher than 268 results in an immediate lockup when doing benches(I think APIC is maxed, and I don't turn it off)
My room was at 24°CNo AC units around... hehe.
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
hey SAE, go download CodeRed's program timer app thingy to see ur exact time in superPi, u cant find the newest version on the last page of the superpi thread :thumbsup:
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
dayum how did you get that dfi stable with vcore mod???
| Intel i7 3770K | Custom H2O | Gigabyte z77x-ud5h | 16GB Samsung | GTX680 | 240g Mushkin Deluxe |
-METALLICA-
When I was testing my Infinity for its max stable fsb, I finally had to settle for 240, but 267-268 fsb was the setting where windows immediately crashed regardless of memory timings, vcore, vdd or anything else I could think of. Of course, I didn't boot with that fsb but went for it with nf7vcore.Originally posted by SAE
Yeah, me too
But everything higher than 268 results in an immediate lockup when doing benches
I think, it's a corellation here.
away & gone
if only this nforce2 board could run 300MHz FSB 1:1
should match A64 i assume..
nice clock sae.. keep pushin..
Thx
Erm, DisposableHero... I did all the OCP/vdroop mods and have sinked all the important hotspots with copper sinks
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
would you recommend that bios for everyday use to me?Originally posted by SAE
I am on 2-17 alpha... the 5-5 beta 21T6 does not work very well currently
and can you link me to those vdroop mods
very sweet stuff there! looks like you had good luck indeed and have a bunch of vanilla hardware.
I would not recommend that bios at allOriginally posted by saaya
would you recommend that bios for everyday use to me?
and can you link me to those vdroop mods
very sweet stuff there! looks like you had good luck indeed and have a bunch of vanilla hardware.
It has the bad habit of loosing bios settings when saving too much OC related stuff at once. So I often have to try to load my CMOS reloaded settings twice or three times... till it works (otherwise it just clears cmos).
vdroop, OCP etc...
http://www.truextreme.com/forums/showthread.php?t=31166
http://www.xtremesystems.org/forums/...0&pagenumber=1
http://forums.pcper.com/showthread.php?t=323291
Check out the useful information there. Nice pics there, too
P.S. I just overheard that vanilla hw thingy(CPU ain't that good, IMO it only does 2.6 on water)
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
any newz on the PI situation?
"M-I-A"
No, not yet...Originally posted by bias_hjorth
any newz on the PI situation?
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
Sae,
truly awesome work!
I'm really stunned that you can get such a high vcore. I tried the vcore and vdroop mod you explained to me in the FAQ thread but still everything above 2V is an instant crash.
Did you L12 mod your cpu?
.:C2D 6600 :: Tuniq tower :: Asus P5B dlx :: 2GBHZ :: OCZ 520W :: 8800GTX :.
Yep. L12 done. Otherwise there won't be high multipliers at these high fsbs...Originally posted by HaLDoL
Sae,
truly awesome work!
I'm really stunned that you can get such a high vcore. I tried the vcore and vdroop mod you explained to me in the FAQ thread but still everything above 2V is an instant crash.
Did you L12 mod your cpu?
I can do over 2.2V but I cannot really use it, either the cpu does not like it or the board itself.
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
That explains a lot. I can do 265 FSb with 8x multi but not with 10x or higher. I did not do the L12 mod though.
Will try it at once!
.:C2D 6600 :: Tuniq tower :: Asus P5B dlx :: 2GBHZ :: OCZ 520W :: 8800GTX :.
Hehe, good luck
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
Do some 3d benchin.... Break the record...
#1 Rig 3700+ San Diego @ 2.9 SS on TT Typhoon
MSI K8N Neo Platinum 2
OCZ DDR booster
Thermaltake Silent 480 Purepower-Voltage Mod
BBA X800xt AIW -Arctic Vga Silencer 4 575,570
Hynix pc4000, 1 gig. 270 @ 2.5,4,4,7
2 7200 Hitachi =160 gig in Raid 0 - 95 mb/sec
Panasonic AE700U 1280x720 @ 110" in my theater
32k in 3d01, 16k in 3d03, 7k in 3d05
#2 Server Rig Pentium M 740(2.65 SS)
Asus p4p800se
Geil 2,3,3,6 (2x512)
Nvidia 6800gt @ Ultra+
Hitachi Sata2 80 gb
Maxtor 16 mb Cache 300 gb
Dell LCD 2005 20" wide
#3 rig Emachines Notebook M6809
~13k 3dmarks in 01
hmm yeah ive gotta do this mod too soon, i can do 260 at like 9 multiplier, although the chip can go to 2680mhz, but with 260fsb i can only do 2340mhz.Originally posted by HaLDoL
That explains a lot. I can do 265 FSb with 8x multi but not with 10x or higher. I did not do the L12 mod though.
Will try it at once!
msi k8n neo2 plat
3200+ winchester (10x262)
bfg 6800gt
pdp pc3200 xbl
thermalright xp-90 w/7v tornado 92mm
As I mentioned in the first post... I have some probs with 3d atm.Originally posted by zxlr8
Do some 3d benchin.... Break the record...
But i'll try soon. I doubt it would suffice to complete 3dmark...
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
2.6 on water is bad?
what L12 mod did you do? link?
thx man
why dont you try it with apic disabled?
Cool-literally. I need to get my board working half as well as yours. My chip will do 2.8 on air, but it is not stable with the cooling I have. I run all the time around 2.5-2.6(220+x11.5) with 1.75 volts.(prime stable) My max fsb is 240. That is not very stable either. I think I would not really see a very big differnce from where I am now and 2.7 all the time on air. I get around 11000 mips in sisoft arithmetic at 230x11.5. I suppose my x800xt will make the biggest differnce whrn it comes to gaming. Let me know if you have any specail tricks for the nf7-s.
#1 Rig 3700+ San Diego @ 2.9 SS on TT Typhoon
MSI K8N Neo Platinum 2
OCZ DDR booster
Thermaltake Silent 480 Purepower-Voltage Mod
BBA X800xt AIW -Arctic Vga Silencer 4 575,570
Hynix pc4000, 1 gig. 270 @ 2.5,4,4,7
2 7200 Hitachi =160 gig in Raid 0 - 95 mb/sec
Panasonic AE700U 1280x720 @ 110" in my theater
32k in 3d01, 16k in 3d03, 7k in 3d05
#2 Server Rig Pentium M 740(2.65 SS)
Asus p4p800se
Geil 2,3,3,6 (2x512)
Nvidia 6800gt @ Ultra+
Hitachi Sata2 80 gb
Maxtor 16 mb Cache 300 gb
Dell LCD 2005 20" wide
#3 rig Emachines Notebook M6809
~13k 3dmarks in 01
Ordinary L12Originally posted by saaya
2.6 on water is bad?
what L12 mod did you do? link?
thx man
why dont you try it with apic disabled?
APIC disabled is against my principles
/edit.
@zxlr8
You will get it... but NF7 can be very
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
What does that mean...pardon my naiveness...
Last edited by zxlr8; 07-13-2004 at 06:02 AM.
#1 Rig 3700+ San Diego @ 2.9 SS on TT Typhoon
MSI K8N Neo Platinum 2
OCZ DDR booster
Thermaltake Silent 480 Purepower-Voltage Mod
BBA X800xt AIW -Arctic Vga Silencer 4 575,570
Hynix pc4000, 1 gig. 270 @ 2.5,4,4,7
2 7200 Hitachi =160 gig in Raid 0 - 95 mb/sec
Panasonic AE700U 1280x720 @ 110" in my theater
32k in 3d01, 16k in 3d03, 7k in 3d05
#2 Server Rig Pentium M 740(2.65 SS)
Asus p4p800se
Geil 2,3,3,6 (2x512)
Nvidia 6800gt @ Ultra+
Hitachi Sata2 80 gb
Maxtor 16 mb Cache 300 gb
Dell LCD 2005 20" wide
#3 rig Emachines Notebook M6809
~13k 3dmarks in 01
Damn, I thought my 35 second superpi was good. I'm only on water.
That OCP mod is definitely good. I did manage to superpi with a 2.1Vcore (bios reading) though:
The problem is hardlock in approximately 1 hour of SETI....
2.075V (bios reading) is 100% stable
DFI NFII ultra infinity, 2600+M @240X11
2X256 + 1X512 KHX BH-5 2-2-2-11
Cathar cascade, Laing D4, 2X heatercore single in parallel
Galaxy 6800nu 410/860
Yeah, that happens automatically when using a "bad/offensive" wordOriginally posted by zxlr8
What does that mean...pardon my naiveness...
@cpl1234
That's definately nice
And of course you got the OCP mod working
Xtremesystems.org
i7-4820K * ryba 2-stager + 1-stager * EVGA X79 Dark * 32G Team Xtreem 2666C11 * EVGA GTX 680 SC Sig. * Intel G2 80G * Corsair HX1000 * Lian Li PC-70B * Watercool Heatkiller, EK Fullcover/Backplate for GTX, MCP355 Dual Setup@Koolance RP-402X2, PA120.3+Alphacool 360, Tubing 16/10.
Posting Permissions
Reply With Quote
Bookmarks