Batch 3103B374, Gigabyte UD7-B3 (F3h), Single Stage
Attachment 118969
Batch 3103B374, Gigabyte UD7-B3 (F3h), Single Stage
Attachment 118969
Sig always changing.
^^^^^^
Got to say Norman, that is one stonking clock. Congrats on it mate....................................will it do anymore ?
AwesomeOriginally Posted by newhit
Cheers Kitfit and Dumo.............Keeping my options close atm...........just in case it needs the latest LinPack
I'd like to know why my Girlyplops are so high (I know, they're not that high but they are high compared to my usual fare). The memory is reliable but not overly speedy......GSkill Trident F3-16000CL9T-6GBTD (2000 CL9-9-9-24).
I've not done anything in the bios (Gig UD7-B3) apart from a bit more Vtt (1.160) and the obvious Vcore increase. CPU PLL is at 1.660v, Vdram 1.66v. All memory tabs are at "Auto" or default and CR at 2.
Windows 7 64bit SP1 (AVX)
Is it quite simply the efficiency of the memory controller in this chip?
Last edited by newhit; 08-15-2011 at 06:33 AM.
Sig always changing
Nope, it does not. Use whatever you're comfortable with.just in case it needs the latest LinPack
The latest Linpack may increase stress levels and performance or reduce execution time, which is a good thing. But you're doing it for yourself. If someone wants to run LinX 0.6.3 with old libraries on their new 2500k at 50 GFlops then it's their deal. It won't be my computer that may crash in one of the upcoming demanding games when you least want it to.
P.S. Sorry that I kept you waiting for the reply. It's summer and I am slowly modding/rebuilding my rig. PM if there is something urgent the next time.
P.P.S. Looks like the first post update keeps timing out, it's either the site today or the post simply got too big!
Last edited by zalbard; 08-17-2011 at 02:23 AM.
Donate to XS forums
it's because u use 4threads no HT. (higher Gflops)Cheers Kitfit and Dumo.............Keeping my options close atm...........just in case it needs the latest LinPack
I'd like to know why my Girlyplops are so high (I know, they're not that high but they are high compared to my usual fare). The memory is reliable but not overly speedy......GSkill Trident F3-16000CL9T-6GBTD (2000 CL9-9-9-24).
I've not done anything in the bios (Gig UD7-B3) apart from a bit more Vtt (1.160) and the obvious Vcore increase. CPU PLL is at 1.660v, Vdram 1.66v. All memory tabs are at "Auto" or default and CR at 2.
Windows 7 64bit SP1 (AVX)
Is it quite simply the efficiency of the memory controller in this chip?
i7 2600K Batch L039B470.
Asus Maximus IV-Gene-Z
Single Stage
RipJawsX 4gb 2133 7-9-7-27-1T
H2O 6970
_______________________________________
Thanx for that.
I'm trying to get a 4C/8T with the new linpack to compare the two runs............if I can replicate the first.
Sig always changing
Batch 3103B374 Gig P67A-UD7-B3 (F6a) Single Stage
Attachment 119068
Last edited by newhit; 08-18-2011 at 08:23 AM.
I really need to figure out the LLC settings on this board... vdroop is killing me. I have been spoiled by Asus voltage monitoring. How do I monitor voltages in windows? Temps were below 60°C so I know it wasn't getting anywhere near 1.6v under load.
Attachment 119127
Last edited by Bun-Bun; 08-20-2011 at 12:48 AM.
Yin|Gigabyte GA-Z68X-UD5-B3|Swiftech XT -> GTX240 -> DDC+ w/ Petra's|2600K @ 5.0GHz @1.368V |4 x 4 GB G.Skill Eco DDR3-1600-8-8-8-24|Asus DirectCUII GTX670|120 GB Crucial M4|2 x 2 TB Seagate LP(Raid-0)|Plextor 755-SA|Auzentech Prelude 7.1|Seasonic M12-700|Lian-Li PC-6077B (Heavily Modded)
Squire|Shuttle SD36G5M| R.I.P.
Posting Permissions
Reply With Quote
Bookmarks