I have done this mod with no change no matter what the resistance. I have changed wires, checked the ohms right on the trimmer and it reads where it should but no change. Has anyone got this to work on the Ultra Infinity or what am I doing wrong here? It reads 1.63v on the fet above the agp slot with no change.
Last edited by WannaOC; 07-11-2004 at 11:42 AM.
P4 630 @ 4131 1.425V, Abit AS8 @ 275 FSB w/ vagp & vdroop mods, 1x1024 OCZ PC3200 (Contact me if you have one to sell!!), Gainward 6800GT
2.4C, Abit AI7, OCZ PC4400 Gold, eVGA gForce4 MX 360/297
XP2400-M, DFI Ultra Infinity w/ VDIMM & VDD mods 250x10, Buffalo CH-5 1:1 @ 3.4V, GForce4 420MX
Posting Permissions
Reply With Quote
Bookmarks