MaximusIV-Extreme Thread

[andressergio]

thanks sergio ... have fun with your golden cpu

thanks buddy !

[andressergio]

Well, it's not so fresh, it's two weeks old.

Good BIOS, try it.

don

can you tell me whats the good ? as i tried and dont feel it as good as 1850

thanks in advance
Sergio

[andressergio]

108 x 51 mem on 2000+ 9-11-9-27 1T



Uploaded with ImageShack.us

[donmarkoni]

don

can you tell me whats the good ? as i tried and dont feel it as good as 1850

thanks in advance
Sergio

Well, at least for me, it's as stable as 1850, but with added option for Extreme Tweaking and it plays good with Elpida Hypers.

There is one thing I noticed last night, that you could check for me, if you have time. And all you M4E guys.
Write Recovery time (tWR) is always set at 8, no matter the speed (1600/1866/2133) or Memory Boost, when set on Auto.

Thanks!

[andressergio]

Well, at least for me, it's as stable as 1850, but with added option for Extreme Tweaking and it plays good with Elpida Hypers.

There is one thing I noticed last night, that you could check for me, if you have time. And all you M4E guys.
Write Recovery time (tWR) is always set at 8, no matter the speed (1600/1866/2133) or Memory Boost, when set on Auto.

Thanks!

i had troubles while my rig was outside on test bed as mice and keyb didnt work...also wouldn boot on same settings as 1850, as for memory boost i cant use it maybe cauz im on 2x4GB 2133 CL9 sticks i just get reboot and shuts off

thanks don !
Sergio

[Leeghoofd]

Oh you guys are evil !! Sergio has been gigaexorcised... don't push that Bclock 24/7 man... it's not worth loosing the board...

[andressergio]

Oh you guys are evil !! Sergio has been gigaexorcised... don't push that Bclock 24/7 man... it's not worth loosing the board...

lmao jajaja

no its just for a quick screen, im on 5Ghz 100x40 1,408 load / 1,416 IDLE

thanks for your advice
Sergio

[owikh84]

2600K @ BCLK 108 X 50 = 5.4GHz
Asus Maximus IV Extreme-Z
GSkill RipjawsX 2200C7 2X2GB @ 2300MHz 7-10-7-27-1T

[fab-45]

very nice !

[l0ud_sil3nc3]

2600K @ BCLK 108 X 50 = 5.4GHz
Asus Maximus IV Extreme-Z
GSkill RipjawsX 2200C7 2X2GB @ 2300MHz 7-10-7-27-1T

great job, especially on the memory 2300 c7

[andressergio]

2600K @ BCLK 108 X 50 = 5.4GHz
Asus Maximus IV Extreme-Z
GSkill RipjawsX 2200C7 2X2GB @ 2300MHz 7-10-7-27-1T

nice nice owi !

[owikh84]

very nice !

great job, especially on the memory 2300 c7

nice nice owi !

thanks guys, i've never got this 108 BCLK & 2300C7 on UD7.

MIVE-Z vs UD7 = 2 - 0

[_AntLionBR_]

I'm having a little problem here. I was using BIOS 1409 here without problems, now resolved now upgrade to version 1850, and the voltages are above the real values ​​that I set in the BIOS.
In 1409 this did not happen, I decided to go back to this version, but the problem now persists in staying.

Example: set DRAM Voltage 1.65V (BIOS), real (sensor) is 1.68V, 0.03V in ever increasing, it happens DRAM Voltage, CPU PLL, VCCIO, VCCSA.

Does anyone know how to solve this now?

SS:

All options to AUTO in the BIOS, it looks like now:

[some_one]

Don't know if it's the same problem but if they are anything like the sensor voltages on my P8P67-EVO then it may just be noisy readings. I noticed this on the EVO B2 and still there with the replacement B3. Using a multimeter showed at least the DRAM voltage was much steadier than the sensor would indicate.

[l0ud_sil3nc3]

voltages have always read a bit higher for me than what I set.

[andressergio]

thanks guys, i've never got this 108 BCLK & 2300C7 on UD7.

MIVE-Z vs UD7 = 2 - 0

my UD7 boots 107 but not as stable as the MIVE, check above i did 108x51 on 8GB 2000+ CL9

[andressergio]

voltages have always read a bit higher for me than what I set.

weird l0ud mine reads on all programs perfect what i set in bios




dang would be nice to make the pics a bit bigger as no matter what i post it looks small

[_AntLionBR_]

Don't know if it's the same problem but if they are anything like the sensor voltages on my P8P67-EVO then it may just be noisy readings. I noticed this on the EVO B2 and still there with the replacement B3. Using a multimeter showed at least the DRAM voltage was much steadier than the sensor would indicate.

I really hope it's just an error of the sensor itself, because I could not return as it was before at all.

voltages have always read a bit higher for me than what I set.

Here before the sensor showed values ​​just as I left the BIOS.
Ex: All AUTO, showed 1.056V (VCCIO and VCCSA) showed DRAM 1.654V. Now the most is reading 0.03V at all options.

weird l0ud mine reads on all programs perfect what i set in bios

http://img638.imageshack.us/img638/116/5ghzsensor.png


dang would be nice to make the pics a bit bigger as no matter what i post it looks small

Here too was reading the voltages correctly andressergio. It was not until I update the BIOS and it started to happen. Any ideas?

[andressergio]

I really hope it's just an error of the sensor itself, because I could not return as it was before at all.

Here before the sensor showed values ​​just as I left the BIOS.
Ex: All AUTO, showed 1.056V (VCCIO and VCCSA) showed DRAM 1.654V. Now the most is reading 0.03V at all options.

Here too was reading the voltages correctly andressergio. It was not until I update the BIOS and it started to happen. Any ideas?

hey bro im on bios 1850 as 1902 i didnt like, what bios are you on ?

saludos desde Uruguay
Sergio

[_AntLionBR_]

hey bro im on bios 1850 as 1902 i didnt like, what bios are you on ?

saludos desde Uruguay
Sergio

Before I was with the 1409 (reading the voltages correctly), I am now currently with 1850.

[andressergio]

Before I was with the 1409 (reading the voltages correctly), I am now currently with 1850.

dang...and if you go back ? it shows correct ?

[some_one]

weird l0ud mine reads on all programs perfect what i set in bios

Notice some of the hwmonitor volts are different to sensors, what sort of max/min do you get if left running awhile?[/QUOTE]

dang would be nice to make the pics a bit bigger as no matter what i post it looks small

Looks good and doesn't break the board out to the right. A quick right click and view picture shows it in it's full glory, at least on FF.

[andressergio]

Notice some of the hwmonitor volts are different to sensors, what sort of max/min do you get if left running awhile?

yes hwmonitor does so, measure max and min, when load idle for ex, and volts are very accurate

Looks good and doesn't break the board out to the right. A quick right click and view picture shows it in it's full glory, at least on FF.[/QUOTE]

you meant click and goes to the link, pic do notha if i do righ click aint have that quick view

cheers
Sergio

[owikh84]

almost there, this time with 2133C8 BBSE kit... :w

2600K @ 107.5 X 50
Asus Maximus IV Extreme-Z
GSkill RipjawsX 2133C8 2X2GB @ 2293MHz 8-9-8-24-1T

[andressergio]

almost there, this time with 2133C8 BBSE kit... :w

2600K @ 107.5 X 50
Asus Maximus IV Extreme-Z
GSkill RipjawsX 2133C8 2X2GB @ 2293MHz 8-9-8-24-1T

nice owi i love 2x2 2133+ kits i have one of mushkins 2133 CL7 will try later for now look this

I2600K @ 100x56 2 cores 2 threads (not to give more volts to this nice chip)
2x4GB Patriot Xtreme 2133 9-11-9-27 1T
MIVE BIOS 1850



Uploaded with ImageShack.us