I think that I discovered the most important fix that was ever done in the ASUS Rampage Formula BIOS history. I still can't believe it and I want someone else that also has this issue to try it out and confirm it.
Halleluja!! Praise the Lord! Loadline Calibration is fixed with 1002B-R3.![]()
I used to have this issue, however only with certain combination of settings (and this was totaly random)... at the end i found certain combination that worked fine for my overclock... anyway i didnt pay any attention to this since then and to check it i would again need to go play with overclock settings and do testings and im not sure if im up for it... its summer and its hot, dont want to torture my computer more then its neccessery![]()
I have LLC ON all the time from early bioses. 0x124 seems not to be related to LLC at least for my case, unless this has been broken in latest bioses.
But funny thing is that lately all my 0x124 will only happen minutes after boot and not after more than 4 hours of playing.
E8400 TRUE120@Asus Maximus Formula@2x2GB Geil Evo One 800MHz 4-4-4@Corsair HX 620W
Sapphire HD6850 1GB@Samsung 830 128GB@Casetek 1022-5@LG 19" 1970HQ
Creative Inspire 5.1 5100@Samsung SH-S203B SA@CM Quickfire Pro Red@Logitech G-600
I know that it doesn't have to do anything with LLC. The problem is that if I enable LLC I always run in to a 0x124 BSOD no matter if it's at full load or Idle. With LLC disabled I can at least have it stable running and the 0x124 BSOD onlu happens under full load with Prime95 or LinX. I also know that it isn't the CPU that is faulty. I'm almost 100% sure that it's a BIOS bug because before updating the Microcode it was almost impossible to boot in to Windows 7 with LLC enabled.
How long are these Microcodes already available?
I think long enough to say that ASUS doesn't care if you've got issues with there board.
Bookmarks